MyHOMEServer1
Installation Manual
54
General information
Warnings and recommendations
It is important to read this manual carefully before proceeding with the installation. The warranty
becomes automatically void in case of negligence, improper use, tampering by unauthorised
personnel.
Note: a home Wi-Fi network with internet access is needed for the connection with INSTALLER CODE
and, also, the smartphone and the MyHOMEServer1 must be connected to the same LAN network.
To use the service, the Customer must acquire the technical equipment which allows access to the
Internet, on the basis of an agreement made by the Customer himself with an ISP (Internet Service
Provider). BTicino plays no part in this.
To use the normal MyHOMEServer1 basic functions, the Customer must install MyHOME_Up on his
smartphone.
The services offered by means of the APP require being able to interact with MyHOMEServer1 remotely
and through the Internet.
In these cases the integration and good working between MyHOMEServer1 and APP may depend on:
– a) quality of the Wi-Fi signal;
– b) type of access contract to the home internet;
– c) type of data contract on the smartphone.
When one of these 3 elements does not conform with the specifications required for product operation,
BTicino accepts no responsibility for any faults.
We would like to inform you that the service provided by BTicino by means of remote use via the APP
involves the use of data. The cost linked to data usage depends on the type of contract which the
customer has with his ISP (Internet Service Provider) and is solely the customer’s responsibility.
Although the system manages devices from third parties, the home-automation system must be
BTicino.
Caution: not all the functions shown in this manual are available for all countries.
Check with your retailer which functions are available for your market.
Warning: the images of this manual are only indicative, and therefore may not exactly represent the
characteristics of the product.
