567
10
Setting the measurement unit:
Press C key to toggle between mg/dL and mmol/L measurement units.
Press M key to confirm the setting.
To delete the memory:
Press Ckey to toggle between a flashing “dEL” for memory deletion
or a non-flashing“dEL”. If you want to delete all memory, press Mkey
while the “dEL” is flashing. If you do not want to delete all memory,
press Mkey when the “dEL” is not flashing.
How to Perform a Blood Glucose Test
Here are the steps on how to perform a blood glucose test on your
pets with SuperCheck Pet and the Test Strips.
1.Gather all the items you needed before you start the test.
Items including: Meter, Test Strips, Lancing Device, Lancets, Control
Solution.
2.Choose a capillary sampling site.
3.Check the code on the test strip vial. If necessary, change the code
on the meter by pressing Cor M after you enter a test strip.
4.Running a Blood Glucose Test
Put the lancet into your lancing device and twists off the protective
cover of the lancet. (Step 1 to 4)
Wash your hands carefully. Be sure to rinse and dry well. Take one
new strip out of the vial and recap the vial immediately. Insert the strip
into the meter. When you insert a strip, choose the code by pressing C
or Mto switch from d01~d03 to c01~c03.
The dog or cat icon will be displayed on the screen to remind you
choosing the correct animal code. Use the adjustable lancing device or
disposable lancet to take a blood sample from the paw pad. The meter
will start counting down for 5 seconds and the result will be showed on
the screen.
Remove the strip by pushing the ejector button. The meter will turn off
and result is stored automatically. (Step 5 to 10)
Biotest Medical Corporation
No. 3-2,Chien-kuo Road,TEPZ Tantzu,
427 Taichung, Taiwan ROC.
Tel : 886-4-25326668
886-4-25326528
Fax:
0537
MEDNET GmbH
Borkstrasse 10,
48163 M¸ nster
Germany
7
1234
8 9
8
