1Explanation of symbols and safety information
Logano G515 - Subject to technical modifications
4
Installation, conversion
Insufficient ventilation may cause dangerous flue gas
leaks.
BOnly have the appliance installed or modified by a
trained and certified heating contractor.
BNever change any parts in contact with flue gas.
BDo not cover or reduce the size of ventilation openings
in doors, windows and walls. If draft-proof windows are
fitted, ensure there is an adequate supply of air to the
room for combustion.
BEnsure that the boiler installation room remains free
from the risk of frost.
BThe heating system must be installed and operated in
accordance with the applicable rules of technology as
well as the national, regional and local code.
BDo not hang up laundry to dry in the boiler room.
Inspection and maintenance
Heating systems should be regularly maintained for the
following reasons:
• to achieve a high level of efficiency and to operate the
system economically (low fuel consumption),
• to achieve a high level of operational safety,
• to maintain the cleanest combustion.
BRecommendation for customers: Sign a
maintenance and inspection contract with a trained
and certified contractor, covering an annual inspection
and demand-dependent maintenance.
BThe operator is responsible for the general and
environmental safety of the heating system.
BImmediately correct all faults to prevent system
damage.
BUse only original Buderus spare parts. Damage caused
by the use of spare parts not supplied by Buderus are
excluded from the Buderus warranty.
Explosive and easily combustible materials
BNever use or store easily flammable materials (paper,
thinners, paints etc.) near the appliance.
Combustion air/room air
BKeep the supply of combustion/room air free of
corrosive substances (e.g. halogenated hydrocarbons
that contain chlorine or fluorine compounds). This will
help prevent corrosion.
BPrevent heavy accumulation of dust.
Instructing the customer
BInstruct customers about the functions and operation
of the appliance.
BInform the customer that they must not carry out any
modifications or repairs.
BOnly use the boiler for its intended purpose and only
when it is in working order.
Disposal
BDispose of packaging in an environmentally
responsible manner.
BAll heating system components that have to be
replaced should be disposed of in environmentally-
responsible manner at an authorized disposal site.
The right fuel
This system requires the correct fuel to ensure a proper
operation. During commissioning, your system installer
will enter the correct type of fuel, which your system
requires, into the table below (ÆChapter 2.4, page 7).
Danger of water damage
BDo not use the appliance if any part of it has been
under water.
BCall in a trained and certified heating contractor
immediately to check the appliance and replace any
electrical or gas valve components that have been
under water.
Other important information
BIf the system overheats or the gas supply does not shut
off, do not switch off or disconnect the power supply to
the pump. Instead, shut off the gas supply somewhere
else to the heating system.
