Buffalo Tools PS07225 Kurzanleitung

PS07225

10 Inch Car Polisher

Assembly & Operating Instructions

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been

made to ensure the accuracy of this manual. These instructions are not meant to cover every possible

condition and situation that may occur. We reserve the right to change this product at any time without

prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO

NOT OPERATE THIS PRODUCT!

HAVE QUESTIONS OR PROBLEMS? DO NOT RETURN THIS PRODUCT TO THE RETAILER -

CONTACT CUSTOMER SERVICE.

If you experience a problem or need parts for this product, visit our website http://www.buffalotools.com

or call our customer help line at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the

sales receipt is required.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE

REFERENCE.

GENERAL SAFETY RULES FOR ALL ELECTRIC POWER TOOLS

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may

result in electric shock, fire and/or serious personal injury.

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

What You Need to Know About Safety Instructions

Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions

and situations that may occur. Common sense, caution and care must be exercised when operating or cleaning

tools and equipment.

Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you do not

understand.

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that follow this

symbol to avoid possible injury or death.

DANGER indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation which,

if not avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which,

if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a

potentially hazardous situation which, if not avoided, may

result in property damage.

NOTE provides additional information that is useful for proper use

and maintenance for this tool. If a NOTE is indicated make sure it

is fully understood.

PS07225 10 Inch Car Polisher Assembly & Operating Instructions 2

IMPORTANT SAFETY INSTRUCTIONS

WORK AREA

Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury.

Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized

outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire

grounded power cord and grounded power supply system.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of

electric shock if your body is grounded.

Do not abuse the cord. Never use the cord to carry the tool or pull the plug from an outlet. Keep the cord away from heat, oil,

sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

When operating the tool outside, use an outdoor extension cord marked “WA” or “W.” These cords are rated for outdoor use

and reduce the risk of electric shock. Make sure the extension cord being used is in good condition. If there are any cuts or nicks (no

matter how deep) in the insulation, DO NOT use that cord. Also, make sure the extension cord is heavy enough to carry the current

needed. DO NOT use small "around-the-house” lamp extension cords. These cords can easily overheat and/or catch fire when used

with power tools.

TOOL USE & CARE

Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is

designed.

Do not use the tool if the power switch does not turn it “ON” or “OFF”. Any tool that cannot be controlled with the switch is

dangerous and must be repaired.

Disconnect the power cord plug from the power source before making any adjustments, changing accessories or storing the

tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

People with pacemakers or other electronic devices should consult with a physician before operating this product. Interruption

or failure of the pacemaker could occur when electrical equipment is operated within close proximity of electrical devices.

Keep hands and fingers away from the rotating Wheel while it is in operation. Your fingers can get stuck inside the rotating wheel

and cause serious injury to the user.

PS07225 10 Inch Car Polisher Assembly & Operating Instructions 3

Keep the power cord in good condition, and replace damaged cords immediately. Do not use the cord to pull the plug from the

outlet. Keep the cord away from materials and surfaces that could damage cords. The risk of electric shock increases when the power

cord is damaged.

Inhaling dust created as a result of construction projects could be hazardous to your health. Construction dust may contain

chemicals, which are known to cause cancer, birth defects and other reproductive harm in the State of California.

These chemicals could be, but are not limited to: lead from lead based paints, crystalline silica from bricks or cement, arsenic, and

chromium from chemically treated-lumber.

To reduce your risk of exposure to harmful materials: always wear a dust mask that is designed to filter out hazardous microscopic

contaminants, always work in a well ventilated area, and wear other approved safety equipment.

Wash hands after handling the power cord. Touching the power cord could expose you to lead, which is known in the State of

California to cause cancer, birth defects and other reproductive harm.

Do not operate power tools in the presence of flammable liquids, gas, or dust. Sparks created from the power tool could ignite

flammable materials.

Keep children, and other distractions at a distance while operating power tools.

This power tool is equipped with a polarized plug, meaning one blade is wider than the other and is designed to fit into a

standard polarized outlet. The plug will fit into polarized outlets only one way. DO NOT FORCE THE PLUG INTO THE OUTLET! If

the plug does not fit, a polarized outlet may need to be installed by a qualified electrician.

Keep the power cord in good condition, and replace damaged cords immediately. Do not use the cord to pull the plug from the

outlet. Keep the cord away from materials and surfaces that could damage cords. The risk of electric shock increases when the power

cord is damaged.

Always use the appropriate extension cord, making sure it is rated for use with power tools. Always be sure the extension cords

are in good condition, free of cuts or nicks in the insulation. If using the power tool in an outside area with an extension cord, make sure

the cord is rated for outdoor use.

Do not make contact with a grounded surface while using this power tool. Contact with surfaces like pipes, radiators or major

appliances increases your risk of electric shock.

Use common sense while operating this power tool.

Do not use this tool if you are:

• Feeling tired or are under the influence of alcohol or drugs.

• Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.

• Overreaching or have improper footing. Handling the tool in this way could cause serious injury.

When using this power tool always:

• Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.

• Check to be sure the power switch is in the “OFF” position before plugging the power tool into an electrical outlet.

PS07225 10 Inch Car Polisher Assembly & Operating Instructions 4

Follow these steps to maintain safe working conditions and good working condition of power tools. Improper care can result in

electric shock or serious injury.

• Use the correct tool for the job. Using the correct tool is safer and faster.

• Make sure the power switch is in good working order. If the power switch no longer turns the tool “ON” or “OFF”,

discontinue use, and have the tool replaced or repaired.

• Remove the power cord from the power source before storage, changing accessories, or moving the tool.

• Keep out of reach of children, or any untrained person. Store tools in a safe and dry place.

• Keep tools clean. Maintaining tools with proper care will increase the life of the power tool, and reduce the risk of injury.

• Check to be sure all moving parts are free from binding and are properly aligned.

• Use only accessories that are recommended by the manufacturer for your tool model.

Safety glasses and ear protection must be worn during operation.

Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

SERVICE

When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use

of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.

IMPORTANT SAFETY INSTRUCTIONS

Before using you need to become familiar with the operation of the tool. If you are unsure about the operation of the tool, or have

any questions about the proper use of the tool, call Customer Service at 1-888-287-6981.

Follow these instructions for safe handling of the tool:

• Do not use solvents containing carbon tetrachloride, ammonia or acetone to clean the tool. Never use gasoline, paint

thinner, or other caustic chemicals that can damage the plastic parts of the tool.

• Always use the appropriate safety gear when operating this tool. Including but not limited, to goggles, dust mask or

respirator. Always work in a well-ventilated area to reduce your exposure to harmful chemicals and dust particles.

FEATURES

• 110V / 60 Hz

• 2800 RPM

PS07225 10 Inch Car Polisher Assembly & Operating Instructions 5

PACKAGE CONTENTS

• Polisher

• 2 Polishing Pads (1 Each Waxing Bonnet (B) / Polishing Bonnet (A) )

COMPONENTS

1) Car Polisher

2) Power Button (On/Off)

3) Handle Grip

4) Power Cord

5) Polishing Wheel

6) Removable Polishing Pad

B) Wax Pad

A) Polishing Pad

ASSEMBLY

Unplug the power plug from the AC power source before assembly, adjustments, or adding/removing accessories.

Unpack product from package and review contents. Keep all packaging until product has been reviewed.

Be prepared and braced for the twisting action of the polisher. Never put the Polisher down until the Rotating Wheel has come

to a complete stop. The Rotating Wheel can grab the surface and pull the tool out of your control.

Wear safety eyewear and dust filters or respirators while using the tool.

The motor may overheat if run for long periods of time. If the motor begins to show signs of overheating, turn the Polisher “Off” and

allow the motor to cool before continuing.

When waxing or polishing your car/truck, do not run the vehicle in an enclosed area. Carbon monoxide is a colorless, odorless, vapor

emitted from a vehicle’s running engine that may cause severe injury or death if inhaled.

Make sure the car/truck being waxed/polished is clear of foreign matter that could damage the tool.

1. Unplug the power cord from the electrical outlet before making any adjustments to the tool.

2. Always use a clean terry cloth Bonnet. Place it securely onto the Wheel Pad.

3. Before use, make sure the car/truck has been thoroughly cleaned and is free of dust, dirt, oil, grease, etc.

4. Use approximately two tablespoons of wax (not included) on the Waxing Bonnet. Do not put wax directly on the surface of the

car/truck. You may choose to add additional wax, depending on the size of the car/truck.

5. Plug the Power Cord into an extension cord (not included). Plug the extension cord into a grounded 120V outlet.

6. Keep the extension cord out of the way while using the Polisher.

7. Start and stop the Polisher while it is held firmly against the surface of the car/truck. Otherwise the Waxing Bonnet may be thrown from the

Pad.

8. Hold the Polisher firmly with both hands. Turn the Power Switch (On/Off) to the “ON” position and allow the Pad to rotate to its full speed.

9. Apply wax to the vehicle, using broad strokes in a criss-cross pattern. Apply the wax evenly. Add additional wax as needed.

10. When the wax has been applied to the car/truck, turn the Power Switch (On/Off) to the “OFF” position. Unplug the Power Cord from the

electrical extension cord, and unplug the extension cord from the 120V electrical outlet.

11. Remove the Bonnet from the Pad. With the Waxing Bonnet in your hand apply the wax to the remaining Hard-to-Reach areas of the vehicle

such as around lights, door handles, under bumpers, etc.

12. Allow time for the wax to dry on the vehicle.

13. Place a clean Polishing Bonnet securely onto the Pad.

14. Plug the Power Cord of the into the electrical extension cord. Plug the extension cord into 120V electrical outlet.

15. Place the extension cord over your shoulder to keep the cord out of the way.

PS07225 10 Inch Car Polisher Assembly & Operating Instructions 6

16. Always start and stop the Polishe while it is held firmly against the surface of the vehicle. Failure to do so may result in the Bonnet being

thrown from the Pad.

17. Grip the Polisher firmly with both hands. Then turn the Power Switch to its “ON” position and allow the Pad to rotate to its full speed.

18. Begin polishing the vehicle by lightly buffing off the wax residue in a circular pattern. Continue polishing until all the wax residue is removed.

19. When the wax has been removed from the car/truck surface, turn the Power Switch (On/Off) to the “OFF” position. Unplug the Power Cord

from the extension cord, then unplug the extension cord from the 120V electrical outlet.

20. Remove the Bonnet from the Pad. With the Polishing Bonnet in your hand, remove the wax from all hard to reach areas of the vehicle such

as around lights, door handles, under bumpers, etc.

IMPORTANT NOTE: DO NOT APPLY TOO MUCH WAX. If the Pad becomes saturated, polishing will be difficult and take longer. If the Bonnet

comes off the Pad during use, too much wax may have been applied.

MAINTENANCE

Disconnect the power supply before cleaning. Wear safety eyewear before cleaning. Use compressed dry air to blow off dust

and debris. Use a soft bristle brush if compressed air is not available.

Applying excessive force to the tool can overload the motor, decrease the life and increase the wear on the tool.

Some chemicals damage the product. Do not use harsh chemicals such as gasoline, carbon tetracholiride, paint thinner, etc.

A qualified repair technician must perform any tool service or repair. Service or maintenance performed by unqualified personnel

could result in injury. Use only identical replacement parts. Use of unauthorized parts or failure to follow maintenance instructions may

create a risk of electric shock or injury.

Do not make contact with a grounded surface while using this power tool. Contact with surfaces like pipes, radiators or major

appliances increases your risk of electric shock.

Use only mild soap and a slightly damp cloth to clean the tool.

Remove the Bonnet from the Pad when the Polisher is not in use. The Pad will dry and retain its original shape.

Store the Polisher with the Pad face up.

ACCESSORIES

Always attach grounded (3-prong) extension cords to grounded (3-prong) outlets.

If you must use an extension cord, be sure that the gauge is large enough to carry the amount of current necessary for your power tool.

If not, your tool may experience a loss of power, excessive voltage drop or overheating. The smaller the gauge number, the heavier the cord.

PS07225 10 Inch Car Polisher Assembly & Operating Instructions 7

PS07225 10 Inch Car Polisher Assembly & Operating Instructions 8

PS072251009

Inhaltsverzeichnis

Andere Buffalo Tools Sander Handbücher

Buffalo Tools

Buffalo Tools PS07401 Kurzanleitung

Beliebte Sander Handbücher anderer Marken

Oliver

Oliver 6305 Bedienungsanleitung

Jet

Jet 22-44 Pro-3 Service-Handbuch

Makita

Makita M9204 Handbuch

Makita

Makita M9204 Bedienungsanleitung

Craftsman

Craftsman 351.215131 Bedienungsanleitung

Clarke

Clarke Woodworker CBS1-5B Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP9778 Bedienungsanleitung

Nitto Kohki

Nitto Kohki BB-20 Bedienungsanleitung

Ferm

Ferm FEOS-135 Bedienungsanleitung

Unior

Unior 1510 Bedienungsanleitung

stayer

stayer ls1200 Bedienungsanleitung

Jet

Jet JSG-96 Service-Handbuch

Parkside

Parkside PDS 290 B2 Bedienungsanleitung

Status

Status XPA Series Bedienungsanleitung

Clarke

Clarke EZ Sand Bedienungsanleitung

Craftsman

Craftsman 113.22521 Bedienungsanleitung

Craftsman

Craftsman 113.225831 Bedienungsanleitung

CLAS

CLAS OP 1429 Bedienungsanleitung