Buffalo ELFSAFE Bedienungsanleitung

! ! !

ELFSAFE / ELFSFB MANUAL

__ __ __ __ __ __ __ __

(record your personal 3-8 digit security code) (Electronic Floor Safe Serial Number)

COMPLETE & SUBMIT REGISTRATION CARD TO VERIFY OWNERSHIP

KEEP THIS MANUAL AND SALES RECEIPT FOR FUTURE REFERENCE

If you experience a problem or have questions, visit call Customer Service at 1-636-532-9888,

Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required.

#1) Insert Key and rotate left, while rotating knob right. Open door.

#2) Remove battery cover and install (4) AA batteries (1.5V) batteries. Replace battery cover.

(NOTE: Batteries are included.)

#3) Before closing door, be certain your keys are not inside the safe. Now close door.

Factory default code is set to 1 5 9 B. To open using electronic lock, press 1 5 9 B.

(These numbers are preset. You should change the entry code as soon as possible after opening the

safe to insure proper security.)

After you have entered the factory code, you will need to turn the knob clockwise to open the door.

You will have 5 seconds to turn the handle before the locking mechanism is reactivated. When the valid

code entered, the lock will beep once and the green LED turns on. When an invalid code is entered, the

lock will keep beeping and the yellow LED flashes.

ENTERING YOUR SECURITY CODE

CHANGING USER CODE #1

ALWAYS PERFORM THE OPERATION WITH THE DOOR OPEN

1) Press the “reset” button, the lock will beep once and the yellow LED turns on.

(The “reset” button is located on the back cover or the side frame (hinge side).

2) Enter your new digit code (3-8 digits), then press “A” or “B” button.

3) Test the lock operation several times before closing the door.

DO NOT SHUT THE DOOR UNTIL YOU HAVE CONFIRMED THAT THE NEW

SECURITY CODE HAS BEEN ENTERED CORRECTLY.

*WRONG TRY PENALTY --- Entry of three (3) consecutive invalid codes starts a

20 second lock out. (It will continue to beep for 20 seconds and the key pad will

not respond to any operation.)

If the code fails, follow steps 1 and 2 again. If the code works successfully, record your combination

number on the front of this form or somewhere in your records, then you should lock the safe. When you

open the safe in the future, enter the security code you have set followed by the “A” or “B” button”.

! ! !

4!Drywall!Screws!

4!Bolts!

202103!

1!!Locking!Bolts!

2!!Reset!Button!

3!!Battery!Compartment!

4!!Lock/Unlock!

5!!Key!

6!!Ready!Indicator!Light!

7!!Low!Battery!Indicator!Light!

8!!Proceed!Indicator!Light!

9!!B-Button!

SPECIFICATIONS

Product Size：19.7"H x 13.8"W x 12.2"D

Internal Dimension: 19.4"H x 13.6"W x 9.8"D

Internal Size = 1.51 Cu Ft

3mm Door (Body 6mm)

This safe is not fire rated

Two one-way locking bolts (No dead bolts)

BATTERY INSTALLATION

This lock requires (4) AA batteries (1.5V). Under normal use, batteries will last about 1 year. When the

battery is low and you press a button on the keypad, a red warning light indicates the battery is low.

To test the battery, enter your security code. If the batteries are low, the red light will come on

momentarily. To replace the battery, remove the cover by pressing the tab and turning the cover as

shown in the illustration. Replace the old battery and screw the cover back in place.

TROUBLE KEY

A “Trouble Key” has been included in the event that you have forgotten or lost your security code. Please

record the number of your key in a safe location in the event the key needs to be replaced in the future.

To open the safe using the Trouble Key, follow the steps below:

1. Remove the key cover.

2. With your right hand, insert the key in the key hole and turn counter clockwise 1/4 turn (until

stopped) to unlock.

3. Keep the door open until you have entered a new security code. Before entering your new

security code remove the key and screw the cover back in place.

4. Enter your new security code. (DO NOT STORE KEY IN SAFE)

REPLACEMENT TROUBLE KEY/OVERRIDE KEY

If you lose your key, verification of ownership is required in order to receive replacement key.

Contact Customer Service at 1-636-532-9888 to verify registration, then complete the Replacement

Form, along with required Service Fees. The Replacement Form must include the Serial Number and

Lock Number and be notarized by a non-family member.

Use the included drywall screws or anchor bolts for final installation.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Buffalo Lagerung Handbücher

Buffalo

Buffalo MiniStation HD-PXU2 Bedienungsanleitung

Buffalo

Buffalo HDW-PDU3 MiniStation Air Bedienungsanleitung

Buffalo

Buffalo TeraStation Pro TS-TGL/R5 Bedienungsanleitung

Buffalo

Buffalo HD-PH100U2 Bedienungsanleitung

Buffalo

Buffalo MiniStation HD-PEU3 Bedienungsanleitung

Buffalo

Buffalo MiniStation HD-PF320U2 Bedienungsanleitung

Buffalo

Buffalo TeraNavigator none Bedienungsanleitung

Buffalo

Buffalo DriveStation HD-HS1.0TQ Bedienungsanleitung

Buffalo

Buffalo HD-PVU2/N Series Bedienungsanleitung

Buffalo

Buffalo TeraStation Pro II TS-HTGL/R5 Bedienungsanleitung

Buffalo

Buffalo DriveStation HD-LCU3 Bedienungsanleitung

Buffalo

Buffalo HD-PV320U2 Bedienungsanleitung

Buffalo

Buffalo DriveStation HD-HSIU2 Series Bedienungsanleitung

Buffalo

Buffalo HD-CELU2 DRIVESTATION Bedienungsanleitung

Buffalo

Buffalo TeraStation Live HS-DH-TGL/R5 Bedienungsanleitung

Buffalo

Buffalo HD-WHU3R1 Bedienungsanleitung

Buffalo

Buffalo HD-LCU3 Bedienungsanleitung

Buffalo

Buffalo LinkStation Pro Bedienungsanleitung

Buffalo

Buffalo SSD-PMU3 Bedienungsanleitung

Buffalo

Buffalo LinkStation LS-LGL Bedienungsanleitung

Buffalo

Buffalo HD-PZU3 Bedienungsanleitung

Buffalo

Buffalo LinkStation Quad LS-QL/R5 Bedienungsanleitung

Buffalo

Buffalo LinkStation Pro Duo LS-WTGL/R1 Bedienungsanleitung

Buffalo

Buffalo MiniStation HD-PXTU2 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung