Bull Escala Power7 Series Programmierhandbuch

ESCALA Power7

Managing system management services

REFERENCE

86 A1 32FF 04

ESCALA Power7

Managing system management services

The ESCALA Power7 publications concern the following models:

- Bull Escala E5-700 (Power 750 / 8233-E8B)

- Bull Escala M6-700 (Power 770 / 9117-MMB)

- Bull Escala M6-705 (Power 770 / 9117-MMC)

- Bull Escala M7-700 (Power 780 / 9179-MHB)

- Bull Escala M7-705 (Power 780 / 9179-MHC)

- Bull Escala E1-700 (Power 710 / 8231-E2B)

- Bull Escala E1-705 (Power 710 / 8231-E1C)

- Bull Escala E2-700 / E2-700T (Power 720 / 8202-E4B)

- Bull Escala E2-705 / E2-705T (Power 720 / 8202-E4C)

- Bull Escala E3-700 (Power 730 / 8231-E2B)

- Bull Escala E3-705 (Power 730 / 8231-E2C)

- Bull Escala E4-700 / E4-700T (Power 740 / 8205-E6B)

- Bull Escala E4-705 (Power 740 / 8205-E6C)

References to Power 755 / 8236-E8C models are irrelevant.

Hardware

May 2012

BULL CEDOC

357 AVENUE PATTON

B.P.20845

49008 ANGERS CEDEX 01

FRANCE

REFERENCE

86 A1 32FF 04

The following copyright notice protects this book under Copyright laws which prohibit such actions as, but not limited to, copying,

distributing, modifying, and making derivative works.

Bull SAS 2012

Printed in France

Suggestions and criticisms concerning the form, content, and presentation of this book are

invited. A form is provided at the end of this book for this purpose.

To order additional copies of this book or other Bull Technical Publications, you are invited

to use the Ordering Form also provided at the end of this book.

Trademarks and Acknowledgements

We acknowledge the right of proprietors of trademarks mentioned in this book.

The information in this document is subject to change without notice. Bull will not be liable for errors contained herein, or

r incidental or consequential damages in connection with the use of this material.

Contents

Safety notices .................................v

Managing system management services......................1

What's new in Managing system management services .....................1

Starting system management services ...........................1

Starting system management services from a logically partitioned server ..............1

Starting system management services from a nonpartitioned server ................2

Starting the SMS menus from the ASMI ........................2

Starting the SMS menus when the ASMI is not available and the system is in standby.........2

Using system management services............................3

Menus and descriptions ..............................3

Main menu and navigation .............................4

Selecting the language in system management services ....................4

Setting up a remote IPL ..............................5

Selecting the BOOTP or TFTP option .........................6

Selecting the ISCSI option .............................8

Configuring adapters ...............................10

Selecting the speed, duplex option..........................10

Selecting the protocol option ...........................10

Changing SCSI settings ..............................11

Selecting the console ...............................11

Selecting boot options ...............................11

Selecting to install or boot a device .........................12

Configuring boot device order ...........................14

Multiboot startup ...............................17

SAN zoning support ..............................17

Power-on self-test keys ...............................18

Exiting system management services ...........................18

Notices ...................................19

Trademarks ...................................20

Electronic emission notices ..............................20

Class A Notices .................................20

Terms and conditions ................................24

iii

iv Managing the system management services

Safety notices

Safety notices may be printed throughout this guide.

vDANGER notices call attention to a situation that is potentially lethal or extremely hazardous to

people.

vCAUTION notices call attention to a situation that is potentially hazardous to people because of some

existing condition.

vAttention notices call attention to the possibility of damage to a program, device, system, or data.

World Trade safety information

Several countries require the safety information contained in product publications to be presented in their

national languages. If this requirement applies to your country, a safety information booklet is included

in the publications package shipped with the product. The booklet contains the safety information in

your national language with references to the U.S. English source. Before using a U.S. English publication

to install, operate, or service this product, you must first become familiar with the related safety

information in the booklet. You should also refer to the booklet any time you do not clearly understand

any safety information in the U.S. English publications.

Laser safety information

The servers can use I/O cards or features that are fiber-optic based and that utilize lasers or LEDs.

Laser compliance

The servers may be installed inside or outside of an IT equipment rack.

DANGER

When working on or around the system, observe the following precautions:

Electrical voltage and current from power, telephone, and communication cables are hazardous. To

avoid a shock hazard:

vConnect power to this unit only with the provided power cord. Do not use the provided power

cord for any other product.

vDo not open or service any power supply assembly.

vDo not connect or disconnect any cables or perform installation, maintenance, or reconfiguration

of this product during an electrical storm.

vThe product might be equipped with multiple power cords. To remove all hazardous voltages,

disconnect all power cords.

vConnect all power cords to a properly wired and grounded electrical outlet. Ensure that the outlet

supplies proper voltage and phase rotation according to the system rating plate.

vConnect any equipment that will be attached to this product to properly wired outlets.

vWhen possible, use one hand only to connect or disconnect signal cables.

vNever turn on any equipment when there is evidence of fire, water, or structural damage.

vDisconnect the attached power cords, telecommunications systems, networks, and modems before

you open the device covers, unless instructed otherwise in the installation and configuration

procedures.

vConnect and disconnect cables as described in the following procedures when installing, moving,

or opening covers on this product or attached devices.

To Disconnect:

1. Turn off everything (unless instructed otherwise).

2. Remove the power cords from the outlets.

3. Remove the signal cables from the connectors.

4. Remove all cables from the devices

To Connect:

1. Turn off everything (unless instructed otherwise).

2. Attach all cables to the devices.

3. Attach the signal cables to the connectors.

4. Attach the power cords to the outlets.

5. Turn on the devices.

(D005a)

DANGER

vi Managing the system management services

Observe the following precautions when working on or around your IT rack system:

vHeavy equipment–personal injury or equipment damage might result if mishandled.

vAlways lower the leveling pads on the rack cabinet.

vAlways install stabilizer brackets on the rack cabinet.

vTo avoid hazardous conditions due to uneven mechanical loading, always install the heaviest

devices in the bottom of the rack cabinet. Always install servers and optional devices starting

from the bottom of the rack cabinet.

vRack-mounted devices are not to be used as shelves or work spaces. Do not place objects on top

of rack-mounted devices.

vEach rack cabinet might have more than one power cord. Be sure to disconnect all power cords in

the rack cabinet when directed to disconnect power during servicing.

vConnect all devices installed in a rack cabinet to power devices installed in the same rack

cabinet. Do not plug a power cord from a device installed in one rack cabinet into a power

device installed in a different rack cabinet.

vAn electrical outlet that is not correctly wired could place hazardous voltage on the metal parts of

the system or the devices that attach to the system. It is the responsibility of the customer to

ensure that the outlet is correctly wired and grounded to prevent an electrical shock.

CAUTION

vDo not install a unit in a rack where the internal rack ambient temperatures will exceed the

manufacturer's recommended ambient temperature for all your rack-mounted devices.

vDo not install a unit in a rack where the air flow is compromised. Ensure that air flow is not

blocked or reduced on any side, front, or back of a unit used for air flow through the unit.

vConsideration should be given to the connection of the equipment to the supply circuit so that

overloading of the circuits does not compromise the supply wiring or overcurrent protection. To

provide the correct power connection to a rack, refer to the rating labels located on the

equipment in the rack to determine the total power requirement of the supply circuit.

v(For sliding drawers.) Do not pull out or install any drawer or feature if the rack stabilizer brackets

are not attached to the rack. Do not pull out more than one drawer at a time. The rack might

become unstable if you pull out more than one drawer at a time.

v(For fixed drawers.) This drawer is a fixed drawer and must not be moved for servicing unless

specified by the manufacturer. Attempting to move the drawer partially or completely out of the

rack might cause the rack to become unstable or cause the drawer to fall out of the rack.

(R001)

Safety notices vii

CAUTION:

Removing components from the upper positions in the rack cabinet improves rack stability during

relocation. Follow these general guidelines whenever you relocate a populated rack cabinet within a

room or building:

vReduce the weight of the rack cabinet by removing equipment starting at the top of the rack

cabinet. When possible, restore the rack cabinet to the configuration of the rack cabinet as you

received it. If this configuration is not known, you must observe the following precautions:

– Remove all devices in the 32U position and above.

– Ensure that the heaviest devices are installed in the bottom of the rack cabinet.

– Ensure that there are no empty U-levels between devices installed in the rack cabinet below the

32U level.

vIf the rack cabinet you are relocating is part of a suite of rack cabinets, detach the rack cabinet from

the suite.

vInspect the route that you plan to take to eliminate potential hazards.

vVerify that the route that you choose can support the weight of the loaded rack cabinet. Refer to the

documentation that comes with your rack cabinet for the weight of a loaded rack cabinet.

vVerify that all door openings are at least 760 x 230 mm (30 x 80 in.).

vEnsure that all devices, shelves, drawers, doors, and cables are secure.

vEnsure that the four leveling pads are raised to their highest position.

vEnsure that there is no stabilizer bracket installed on the rack cabinet during movement.

vDo not use a ramp inclined at more than 10 degrees.

vWhen the rack cabinet is in the new location, complete the following steps:

– Lower the four leveling pads.

– Install stabilizer brackets on the rack cabinet.

– If you removed any devices from the rack cabinet, repopulate the rack cabinet from the lowest

position to the highest position.

vIf a long-distance relocation is required, restore the rack cabinet to the configuration of the rack

cabinet as you received it. Pack the rack cabinet in the original packaging material, or equivalent.

Also lower the leveling pads to raise the casters off of the pallet and bolt the rack cabinet to the

pallet.

(R002)

(L001)

(L002)

viii Managing the system management services

Andere Handbücher für Escala Power7 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bull Server Handbücher

Bull

Bull Escala PL 245T/R Betriebsanleitung

Bull

Bull Escala Power7 Series Bedienungsanleitung

Bull

Bull ESCALA PL 240 Series Bedienungsanleitung

Bull

Bull NovaScale 9006 Bedienungsanleitung

Bull

Bull Escala Power7 Series Handbuch

Bull

Bull Novascale T810E1 Bedienungsanleitung

Bull

Bull Escala Power7 Series Handbuch

Bull

Bull Escala E5-700 Bedienungsanleitung

Bull

Bull novascale R480 F2 Bedienungsanleitung

Bull

Bull Escala Power7 Series Betriebsanleitung

Bull

Bull Escala Power5 Series Betriebsanleitung

Bull

Bull Escala Power7 Series Bedienungsanleitung

Bull

Bull NovaScale T820 F2 Bedienungsanleitung

Bull

Bull NovaScale 5 5 Series Bedienungsanleitung

Bull

Bull NovaScale Blade BL265 Bedienungsanleitung

Bull

Bull ESCALA PL860T/R Gebrauchs- und Pflegehandbuch

Bull

Bull Escala E5-700 Bedienungsanleitung

Bull

Bull Escala PL 1650R-L+ Betriebsanleitung

Bull

Bull Escala EPC400 Bedienungsanleitung

Bull

Bull Escala E1-700 Handbuch

Bull

Bull Escala PL 600T Bedienungsanleitung

Bull

Bull NovaScale R460 E1 Bedienungsanleitung

Bull

Bull NovaScale Blade 2040 Series Bedienungsanleitung

Bull

Bull NovaScale R450 F2 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung