Bunn G2 trifecta Installationsanleitung

G1, G2 & G3 GRINDERS

USE & CARE INSTRUCTIONS

STEP 1 STEP 2 STEP 3 STEP 4

Raise the top lid and add the

whole bean coffee. Close the

top lid.

Allow the bag to rest on the

screen beneath the chute.

Turn the selector knob to align

the red arrow with the desired

grind.

STEP 5

Turn the ON/OFF switch to ON and

press the start switch.

STEP 6 STEP 7 STEP 8

Locate the back of a bag behind

the dispense chute. (The grinder

will not operate unless the bag

is behind the chute.) This will

activate the bag switch.

Flip the cleaning lever a few times

as dispensing slows.

Remove the bag when ground

coffee is no longer dispensed

from the chute. The grinder will

stop automatically when the bag

is removed.

NOTE - The start switch will have

to be pressed again to continue

the cycle if the bag is removed

before grinding is completed.

Turn the ON/OFF/START switch

to the OFF position.

COFFEE GRINDING

STEP 2 STEP 3

WARNING - Prior to

cleaning the grind cham-

ber, unplug the grinder

before removal of any

panel or grind chamber

housing parts.

Empty all beans from

hopper(s). Plug in the

grinder, place an empty

bag behind the dispense

chute. Press and release

the “START” switch. Run

a few cycles until all cof-

fee in the grind chamber

is dispensed and discon-

nect the grinder from the

power source. Remove

the bag.

STEP 1

Clean all exterior surfaces

using a damp cloth rinsed

in any mild, nonabrasive,

liquid detergent. Care

should be taken not to

scratch the grinder with

any abrasive material.

STEP 7

Wash all parts in a mild

solution of detergent with

hot water and a stiff non

metallic bristle brush.

Rinse all parts thoroughly

and allow them to air dry

before reinstalling.

STEP 4

STEP 8 STEP 9 STEP 10

Remove the two screws

and remove the dial plate

and selector knob as-

sembly.

39563 102506

G1, G2 & G3 GRINDERS

USE & CARE INSTRUCTIONS

Carefully clean the grind

chamber, dial plate as-

sembly, chute opening

and dial plate opening

with a dry stiff non me-

tallic bristle brush. Wipe

with a clean cloth that has

been soaking in a mild

solution of detergent and

hot water. Reinstall the

spring and rotor with burr

onto the motor shaft.

Align the slot in the mo-

tor shaft with the rotor

and reinstall shear plate.

Reinstall rotor cup and

grind selector dial plate

to the burr housing. Re-

fer to the Operating and

Service manual for burr

adjustments.

Remove the four screws

at the top of the chute and

remove the chute. Using

a pair of pliers, remove

the C-clips securing the

ﬂapper arm to the chute.

Remove the ﬂapper se-

curement pins carefully

(noting the location of

each ﬂapper spring).

CLEANING

STEP 5

Slide the burr auger ro-

tor/spring assembly off

the motor shaft and disas-

semble for cleaning.

STEP 6

Remove the two screws

securing the stationary

burr to the grind cham-

ber.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bunn Kaffeemühle Handbücher

Bunn

Bunn G9WD-RH Series Kurzanleitung

Bunn

Bunn MHG Kurzanleitung

Bunn

Bunn HVG Gebrauchsanweisung

Bunn

Bunn HVG Bedienungsanleitung

Bunn

Bunn JDF-4 Montageanleitung

Bunn

Bunn LPG Fehlerbehebungshandbuch

Bunn

Bunn G9WD-RH Series Bedienungsanleitung

Bunn

Bunn G9-2 HD Fehlerbehebungshandbuch

Bunn

Bunn DG-2 Bedienungsanleitung

Bunn

Bunn POWDER AUTO FILL Gebrauchsanweisung

Bunn

Bunn G9WD-RH Series Fehlerbehebungshandbuch

Bunn

Bunn FPG Fehlerbehebungshandbuch

Bunn

Bunn G1 Fehlerbehebungshandbuch

Bunn

Bunn LPG Installationsanleitung

Bunn

Bunn ESJ Gebrauchsanweisung

Bunn

Bunn MHG Series Installationsanleitung

Bunn

Bunn G9WD-RH Series Fehlerbehebungshandbuch

Bunn

Bunn 120/208-240V Gebrauchsanweisung

Bunn

Bunn FPGA Fehlerbehebungshandbuch

Bunn

Bunn FPG Gebrauchsanweisung

Bunn

Bunn G1 Gebrauchsanweisung

Bunn

Bunn LPG Bedienungsanleitung

Bunn

Bunn G9 HD Installationsanleitung

Bunn

Bunn G1 Fehlerbehebungshandbuch

Beliebte Kaffeemühle Handbücher anderer Marken

SOLAC

SOLAC All4Coffee MC6253 Bedienungsanleitung

Teesa

Teesa TSA4011 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home HG KD 40 Bedienungsanleitung

tomado

tomado TM-1287 Bedienungsanleitung

Aicok

Aicok CG9220 Bedienungsanleitung

Zelmer

Zelmer ZCG7925 Bedienungsanleitung

Baratza

Baratza Vario Bedienungsanleitung

Baratza

Baratza Forté Bedienungsanleitung

Isomac

Isomac ROBY Bedienungsanleitung

Eldom

Eldom Dott MK60 Bedienungsanleitung

Baratza

Baratza Forté AP Bedienungsanleitung

FAMITEC

FAMITEC BOLD Bedienungsanleitung

Santos

Santos SC55 Betriebsanleitung

Lumme

Lumme LU-2601 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi MC02 Bedienungsanleitung

Eureka

Eureka Zenith E Bedienungsanleitung

Baratza

Baratza Maestro Bedienungsanleitung

Baratza

Baratza Esatto Bedienungsanleitung