Baratza Vario Bedienungsanleitung
OPERATIONS
MANUAL
®
Ceramic Burr Coffee Grinder
VARIOTM
VARIOTM Manual
2
Thank you for purchasing the VARIO coffee grinder. With the VARIO it is now
easier than ever to make professional quality coffee, whether at home, the
ofce, or your café.
The Vario is a compact, time-based grinder, dedicated to grinding for all styles
of coffee brewing. The Vario has a small footprint; intuitive control panel; and
a macro/micro adjustment.
INTRODUCTION
3
VARIOTM Manual
INTRODUCTION
Burrs
The VARIO uses at ceramic burrs, which are great for all styles of coffee.
Ceramic burrs are harder than steel and last (on average) about twice as long
as steel burrs.
PortaHolder
The VARIO comes with a PortaHolder that can easily be adjusted to t any
portalter.
VARIOTM
VARIOTM Manual
4
TABLE OF CONTENTS
INTRODUCTION 2
TABLE OF CONTENTS 4
PARTS IDENTIFICATION 6
SAFETY INFORMATION 7
OPERATION 9
Normal Grinding Operation 9
Time Based Grinding Operation 10
Programming 10
Sleep Mode 11
PortaHolder Set-Up and Use 12
Burr Calibration 12
5
VARIOTM Manual
CARE and CLEANING 14
Removing the Bean Hopper 14
Removing the Upper Burr 14
Cleaning the Grounds Bin, Hopper and Burrs 14
Replacing the Burr 15
Replacing the Bean Hopper 15
Automatic Cleaning 16
WARRANTY and SERVICE 17
VARIOTM Manual
6
PARTS IDENTIFICATION
Whole bean hopper (250 grams)
Grind time adjustment buttons (2)
Manual grind button
Programable grind setting buttons (3)
Hopper lid
Micro grind adjustment lever
LCD grind time indicator
Start / Stop button
Upper burr carrier
Macro grind adjustment lever
Ceramic burrs
Ground coffee bin (250 grams.)
Grind button LED (3)
VARIO
TM
7
VARIOTM Manual
Please read the information below very carefully. It contains important safety
information for this appliance. Please keep these instructions for future
reference.
►Use only with AC current and the correct voltage. See the label on the
base of the grinder to determine the correct voltage.
►Only clean the grinder housing with a dry or slightly damp cloth.
►Do not use this grinder for anything other than its intended use (i.e.
grinding whole roasted coffee beans).
►Baratza will not accept any liability for damage or injury if the grinder
is used other than for its intended purpose or is improperly operated
or repaired. All warranty claims will be void.
►Disassemble your grinder only as directed in the Care and Cleaning
Section of this manual. If you cannot remedy a malfunction, check
www.baratza.com and visit our Troubleshooting page.
►Do not operate the grinder with a damaged cord or plug, or if the grinder
malfunctions.
SAFETY INFORMATION
VARIOTM Manual
8
►Do not leave your grinder unattended while turned ON.
►Shut off and unplug the grinder from the electrical outlet when not in
use and before cleaning.
►To unplug, grasp plug and remove from the outlet. Never pull on the
cord.
►Keep your grinder out of the reach of children.
►Do not immerse the grinder, plug or cord in water or any other liquid.
CAUTION: ALWAYS unplug the electrical supply cord prior to cleaning the
grinder.
VARIOTM
9
VARIOTM Manual
OPERATION
Place the VARIO grinder on a level surface. With the hopper lid in place, mount
the hopper on the grinder housing by lining up the two small tabs at the base
of the hopper with the two slots inside the collar on the top of the grinder.
Turn the hopper clockwise until it locks into position (expect to apply force).
Insert the power plug into an AC outlet. Pour the desired quantity of roasted,
whole coffee beans into the hopper. Slide the ground coffee bin into the front
of the grinder.
Press one of the preset buttons, then press START.
Normal Grinding Operation
Move the Macro lever (right side) up or down, to the desired grind setting. Set
the Micro adjustment lever (left side) to the middle of the scale.
Starting brew settings can be found at www.baratza.com under the Support
tab.
Grind a small amount of coffee into the bin by pressing the START button, then
pressing it again to stop the grinding. Check the particle size. If the particle
size is close to what you desire, use the Micro lever to ne-tune the grind size.
If the particle size needs a big change, then adjust the Macro lever to a new
position.
VARIOTM Manual
10
The full range on the Micro scale is equal to one “click” or position change on
the Macro scale. Adjusting levers UP produces a smaller particle size, adjusting
levers DOWN produces a larger particle size.
Time Based Grinding Operation
Place the PortaHolder or the ground coffee bin in the grinder. Press a preset
button (1,2,3). The screen will show the corresponding programmed grind time
in seconds. Press START button to begin grinding. While grinding, the screen
will count down the seconds to 0.0. When the screen reaches 0 seconds, the
motor will stop and the display will reset again to the programmed time. For
greater quantities of ground coffee press the Manual button, then START. The
grinder will count up to 90 seconds, then shut off automatically. At any time
during MANUAL operation you can stop the grinding by pressing the STOP
button. The motor will stop and the screen will show the total amount of
seconds, for 3 seconds, then it will reset to 0.0.
Programming
The VARIO is equipped with three programmable buttons. The buttons are
simply labeled 1,2,3. These programmable buttons only adjust the amount of
time for coffee to be ground, they do not adjust the grind setting.
Each button comes from the factory with the following presets:
Time: 1=10s, 2=15s, 3=30s
You can easily program more or less grinding time as follows:
1. Select a Preset button.
Andere Handbücher für Vario
8
Inhaltsverzeichnis
Andere Baratza Kaffeemühle Handbücher
Baratza
Baratza VIRTUOSO+ Bedienungsanleitung
Baratza
Baratza Forte AP Bedienungsanleitung
Baratza
Baratza SETTE 30 Installations- und Benutzerhandbuch
Baratza
Baratza Solis Maestro Bedienungsanleitung
Baratza
Baratza SETTE 30 Bedienungsanleitung
Baratza
Baratza Preciso Bedienungsanleitung
Baratza
Baratza Encore Bedienungsanleitung
Baratza
Baratza Encore Installationsanleitung
Baratza
Baratza SETTE 30 Installations- und Benutzerhandbuch
Baratza
Baratza Preciso Bedienungsanleitung
Baratza
Baratza sette 270 Bedienungsanleitung
Baratza
Baratza Maestro Plus Bedienungsanleitung
Baratza
Baratza Encore Bedienungsanleitung
Baratza
Baratza Vario W+ Bedienungsanleitung
Baratza
Baratza Vario W+ Bedienungsanleitung
Baratza
Baratza Encore ESP Bedienungsanleitung
Baratza
Baratza Esatto Bedienungsanleitung
Baratza
Baratza Vario Bedienungsanleitung
Baratza
Baratza Virtuoso Bedienungsanleitung
Baratza
Baratza Maestro Gebrauchs- und Pflegehandbuch
