Burson Funk Bedienungsanleitung
Burson Funk
Headphone Amplifier / Speaker Amplifier
User Manual
Register for warranty Ref. page 6 for details
Thank You.
All of us at Burson Audio would like to say thank you, and congratulations on purchasing the Burson
Funk. We sincerely believe that your Burson Funk is an intelligent investment that will bring you many
years of musical enjoyment and satisfaction.
We understand how eager you are to begin listening and we want you to become familiar with the full
capabilities of the Burson Funk. However, before powering on the device, we encourage you to look
through the manual.
Team Burson
The less the equipment tampers with the music, the greater the music becomes. This has been the
core design philosophy of Burson Audio since 1996. If the equipment is honest and transparent then
the proper tempo, dynamics and tone will materialize as a natural expression of the music and it
becomes unnecessary to flavour the original sound. We believe that this ideal can never be achieved
through standard circuitry building blocks such as opamps, IC regulators or even standard
transformers. Instead, we work towards this ideal through the research and development of
customized solid-state circuitries that are developed specifically to suit our applications. Only then
will each and every component involved be pushed to their performance peak. And only then will the
end result be consistent with our idealism.
Team Burson
Unpacking
After carefully unpacking your Burson Funk, inspect for any shipping damage and call your dealer
immediately if any is found. Do not plug your Burson Funk into any outlet if you find shipping damage.
Please save all packing materials so the unit can be easily and safely shipped if the need arises.
The Accessories
●Funk Headphone Amp / Speaker Amp
●External Power Supply 24V 3A
●RCA Cables
Basic Setup
Stand Alone Setup
1. Make sure the unit is off.
2. Connect the 24V external power supply to the Funk （via the barrel socket)
3. Connect the line level source to the Funk RCA inputs.
4. Connect your headphones to the headphone socket
5. Connect your speaker to the Funk speaker outputs.
6. Power on the Funk.
7. Turn the volume control knob to adjust the volume.
Connections
Break-in, Warm-up and Caring.
The sound of the Burson Funk improves steadily within minutes (not hours) after powered-up.
Never, connect or disconnect the headphone jack or the RCA cables from the Funk while music is
playing. This could damage the Funk.
Never leave your amp on 24 / 7! There is a dangerous audiophile myth that having it on 24 / 7 makes
it sound better. It’s bad for the planet and will significantly quicken the drying of chemicals inside
capacitors. Hence it will significantly shorten the useful life of your beloved equipment.
Opamp Change & Upgrade
The Burson Funk allows opamp changing to customise its sound to the owner’s preference. When
changing opamps, please be aware of the following:
1. The opamp power supply voltage in the Burson Funk is +/-15V
2. There are 2 dual opamps. One for the headphone amp stage and one for the Speaker amp
stage.
3. Please refer to the following diagram for the position and correct orientation of the
opamps.
The Initial Powering up
Make sure volume control has been turned to minimal when using your Funk for the first time. Always
power on your source machine first and your power amp last. When powering down your system
reverse the steps.
Free Warranty Extension
All Burson Audio products are covered by 24 months of warranty (See conditions below). You can
extend the warranty to 3 years by registering your Funk unit on our warranty page:
https://www.bursonaudio.com/warranty/.
Warranty Conditions
Burson Audio warrants that this product shall be free from defects in materials and workmanship for:
The warranty period begins at the date of sale and is subject to the following requirements and
understandings:
1. This is a non-transferable warranty.
2. This product is only warranted in the country of original sale by Burson / authorised dealer.
3. The product must not have been modified in any manner whatsoever, or the warranty is
immediately voided.
4. The product must not have been stored in a humid, damp environment; nor subjected to
weather, water, or salt spray.
5. During the warranty period, Burson will replace a defective Burson Funk with a similar
available product, at no cost to the owner for labour, materials, and shipping charges from
Burson.
6. Burson shall not, under any circumstances, be liable for any incidental or consequential
damages arising from the loss of property or other damage or losses due to the failure of a
Burson Funk. Burson will not pay for loss of use or inconvenience caused by the failure of a
Burson Funk. Burson will not pay for damage caused to other audio components caused by
the failure of the Burson Funk within the limits allowed by Australian Law.
7. The compatibility between our USB receiver and your computer is dependent on software
drivers provided to Burson by the USB chip manufacturer. Therefore Burson cannot
guarantee the compatibility of our USB receiver during or after the warranty period.
Inhaltsverzeichnis
Andere Burson Verstärker Handbücher
Burson
Burson Timekeeper Bedienungsanleitung
Burson
Burson Soloist Bedienungsanleitung
Burson
Burson DIGNA Bedienungsanleitung
Burson
Burson Conductor 3 Bedienungsanleitung
Burson
Burson Conductor Virtuoso Bedienungsanleitung
Burson
Burson Soloist 3X GT Bedienungsanleitung
Burson
Burson Funk Bedienungsanleitung
Burson
Burson Conductor Bedienungsanleitung
Burson
Burson Soloist 3X Performance Bedienungsanleitung
Burson
Burson Conductor 3X Performance Bedienungsanleitung
Burson
Burson Conductor 3X Performance Bedienungsanleitung
Burson
Burson C3XP Bedienungsanleitung
Burson
Burson Soloist SL Bedienungsanleitung
Burson
Burson Playmate Bedienungsanleitung
Burson
Burson Playmate 2 Bedienungsanleitung
Burson
Burson PC-160 Bedienungsanleitung
Burson
Burson Soloist SL Bedienungsanleitung
Burson
Burson AB160 Bedienungsanleitung
Burson
Burson Conductor 3 Bedienungsanleitung
Burson
Burson Conductor SL SL9018 Bedienungsanleitung
