Bushnell StealthView 26-0542 Bedienungsanleitung

INSTRUCTION MANUAL

MANUEL D’INSTRUCTIONS

MANUAL DE INSTRUCCIONES

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUÇÕES

Model: 260542

Lit. #: 98-0752/05-13

digital

night vision

5 x42

StealthView™

ENGLISH 4

FraNçaIS 11

ESpañoL 18

DEutScH 25

ItaLIaNo 32

portuGuêS 39

Congratulations on the purchase of your Bushnell® StealthView™ Digital Night Vision. Comprised of high quality electronics

and optics, the Bushnell StealthView is a hand-held digital night vision viewing system that utilizes a low-light CMOS

(complementary metal oxide semiconductor) sensor providing images comparable to generation 2 & 3 resolution. Day and

Night time images are magnified and displayed on a black and white micro display screen. The StealthView also contains

an RCA Video Output port which allows live transmission to video camcorders, computer lap tops / monitors, and television

screens.

HOW DIGITAL NIGHT VISION WORKS

Bushnell Digital Night Vision products collect existing light through the objective lens. The light is then processed through

a highly sensitive complementary metal oxide semiconductor and transferred to the micro display (black and white viewing

screen). Images viewed through the viewing screen are magnified 5 times.

StealthView has two infrared illuminators. A short range illuminator which is always on when the device is on, and a “Super”

infrared illuminator used for objects at longer distances and for exceptionally dark conditions.

StealthView is ideal for camping, caving, scouting, maritime navigation, and observing wildlife under the veil of darkness,

patrolling warehouses and similar surveillance operations where light is scarce.

OPERATING INSRUCTIONS

1. Remove the objective lens cap from the objective lens (1).

2. Slide the battery door open and remove the battery cartridge. Insert six AA alkaline or 6 AA nickel cadmium batteries into

the battery cartridge (2) Be sure to observe the polarity indicators as shown within the battery cartridge.

3. Insert the battery cartridge into the device making sure that the cartridge connectors are making contact with the contacts

within the device.

4. Press the ON button (3) to power the device on. A stable green LED indicator light (4) indicates that the device is ready for

use. A flashing green indicator light indicates that the battery power is low. A flashing red indicator light indicates that the

battery power is empty.

5. View through the eyepiece (5) and locate an object within 20-30 yards / meters.

english

6. To focus the image, first adjust the eyepiece diopter (9) and then rotate the objective lens (1) until the display screen is in focus

and the view is clearest. At this point, the eyepiece diopter is set for your individual eyesight and will not require further

adjustment when viewing objects at different distances. When changing the viewing distance, simply rotate the objective

lens (1) until the image is in focus.

7. To adjust the image brightness of the viewing screen, either press the “+” (6) to increase brightness or the “-“(7) to decrease

brightness. If the device is turned off and then back on, the brightness level will return to the previous brightness level.

8. When you power the device on, the short range Infrared Illuminator (13) is automatically turned on.

9. StealthView Digital Night Vision also contains a “super” infrared (I.R.) diode (14) for illumination of objects in complete

darkness where no ambient light source, such as moonlight, is available. To activate the super IR, simply press the IR button

(10) located next to the ON button. If the device is focused on an object closer than 15 yards / meters, the emission spot

of this “super” infrared (bright light circle) will be shifted to the right side of the display. While focusing from one object to

another object, it might be necessary to rotate the objective lens and increase or decrease image brightness of the viewing

screen in order to achieve the best image quality.

10. The StealthView contains a video output port (11). This port allows one to transmit images to an external LCD monitor or

video recorder. Plug the output video cable into the StealthView video output port (11). When the StealthView is coupled

with video equipment, the observed image can be recorded.

11. The StealthView also contains a 12 volt auxiliary power port (12). To connect the StealthView to this port, plug the power

cable (not included) into the StealthView’s power input port and connect the other end of the cable to the vehicle’s auxiliary

power port. To connect the StealthView to a household outlet, use a 12 volt dc output switching power adapter (not

included).

NOTE: When the batteries are in the battery cartridge and the external power source is turned on, the device operates on the

external power source. If you unplug the external power source, and you want to use the battery source, you have to press

the ON button (3) to make the device operate.

TROUBLESHOOTING

StealthView will not turn on

1. Check that the batteries and battery cartridge (2) are installed correctly. If the batteries and cartridge are installed correctly

and the batteries are good, then the green LED indicator light should be on.

2. Check that the power button (3) has been depressed to the ON position.

Image is not focused.

1. Adjust the focus of the objective lens (1) and eyepiece diopter (9).

2. Adjust the LCD brightness screen up or down until satisfactory.

3. Try turning the super I.R. spotlight ON (10). Typically, the super I.R spotlight needs to be on when viewing objects far away

in complete darkness and can be off when viewing objects at close distances with some ambient light.

CARE AND MAINTENANCE

Your Bushnell Digital Night Vision device was designed to provide many years of reliable service. To ensure that you get the

most enjoyment out of your Digital Night Vision device, always obey the following warning and precautions.

• Do not open the body of the device or otherwise attempt to service this device.

• Always store the device in a dry, well ventilated room.

• Keep the device away from any heating and air conditioning vents or other heating devices, direct sunlight, and moisture.

• Avoid dropping or otherwise shocking the unit. Although designed for rugged outdoor use, this device incorporates a

sophisticated digital circuitry which could be damaged in extreme cases of misuse.

• Clean the optical lens with a professional lens cleaning supplies.

• Clean the exterior of the device with a soft clean cloth.

• Avoid removing the objective lens as the CMOS chip can be damaged.

• Do not leave the device in direct sunlight or rain.

• Do not cover the vent grid (8) of the super I.R.

• The device can be powered with 6 nickel cadmium batteries or 6 alkaline batteries.

• The super I.R. is focused correctly from the factory. Do not attempt to adjust the focus of the super I.R.

• Remove the batteries if the device will not be used for longer than 2 months.

SPECIFICATIONS

Magnification: 5x

Objective Size: 42 mm

Battery Type: 6 AA batteries (not included)

Operating Time with “super” Infrared: Up to 2 hours of continuous run time

Operating Time without “super” infrared: Up to 8 hours of continuous run time

Temperature Range (F/C): 14-104 / -10-40

Dimensions (in. /mm): 6.5 x 3.5 x 2.3 / 166 x 102 x 57

Weight (oz./g): 20.2 oz. / 573

Tripod Mount: Yes

Video Out*: NTSC

12V Connector: 5mm outside dimension, 2 mm inside dimension,

14mm shaft length, Positive center signal

* Note: use of lowest brightness settings may create signal levels too low for some NTSC televisions.

ONE-Year LIMITED WARRANTY

Your Bushnell®product is warranted to be free of defects in materials and workmanship for one year after the date of

purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that

you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling,

installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.

Any return made under this warranty must be accompanied by the items listed below:

1) A check/money order in the amount of $10.00 to cover the cost of postage and handling

2) Name and address for product return

3) An explanation of the defect

4) Proof of Date Purchased

5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage

prepaid to the address listed below:

IN U.S.A. Send To: IN CANADA Send To:

Bushnell Outdoor Products Bushnell Outdoor Products

Attn.: Repairs Attn.: Repairs

9200 Cody 25A East Pearce Street, Unit 1

Overland Park, Kansas 66214 Richmond Hill, Ontario L4B 2M9

For products purchased outside the United States or Canada please contact your local dealer for applicable warranty

information. In Europe you may also contact Bushnell at: Bushnell Germany GmbH

European Service Centre

Mathias-Brüggen-Str. 80

D-50827 Köln

GERMANY

Tél: +49 221 995568-0

Fax: +49 221 995568-20

This warranty gives you specific legal rights.

You may have other rights which vary from country to country.

FCC notE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part

15 of FCC Rules.

Specications and designs are subject to change without any notice or obligation on the part of the manufacturer.

Disposal of Electric and Electronic Equipment

(Applicable in the EU and other European countries with separate collection systems)

This equipment contains electric and/or electronic parts and must therefore not be disposed of as normal household

waste. Instead, it should be disposed at the respective collection points for recycling provided by the communities. For

you, this is free of charge.

If the equipment contains exchangeable (rechargeable) batteries, these too must be removed before and, if necessary, in

turn be disposed of according to the relevant regulations (see also the respective comments in this unit’s instructions).

Further information about the subject is available at your community administration, your local waste collection

company, or in the store where you purchased this equipment.

Andere Handbücher für StealthView 26-0542

Inhaltsverzeichnis

Sprachen:

Andere Bushnell Fernglas Handbücher

Bushnell

Bushnell Equinox Z 260501 Bedienungsanleitung

Bushnell

Bushnell Image View 11-8321 Bedienungsanleitung

Bushnell

Bushnell Legend E Series Bedienungsanleitung

Bushnell

Bushnell H2O 138005 Bedienungsanleitung

Bushnell

Bushnell Spectator Sport Series Bedienungsanleitung

Bushnell

Bushnell ImageView 11-8338 Bedienungsanleitung

Bushnell

Bushnell Instant Replay 18-0833 Bedienungsanleitung

Bushnell

Bushnell IMAGEVIEW HD 118328 Bedienungsanleitung

Bushnell

Bushnell 280751 Bedienungsanleitung

Bushnell

Bushnell Marine 13-7500 Bedienungsanleitung

Bushnell

Bushnell Imageview 11-1025 Bedienungsanleitung

Bushnell

Bushnell ELITE1500ARCTM 20-5101 Bedienungsanleitung

Bushnell

Bushnell 190836 Bedienungsanleitung

Bushnell

Bushnell Night Vision 26-2036 Bedienungsanleitung

Bushnell

Bushnell ImageView 98-0917/04-09 Bedienungsanleitung

Bushnell

Bushnell Trophy XLT Bedienungsanleitung

Bushnell

Bushnell 11-0512 Bedienungsanleitung

Bushnell

Bushnell 26-2024W Bedienungsanleitung

Bushnell

Bushnell Image View 111026 Bedienungsanleitung

Bushnell

Bushnell BONE COLLECTOR REALTREE EDGE TROPHY 10 x 42 Bedienungsanleitung

Bushnell

Bushnell Night Vision 26-1554 Bedienungsanleitung

Bushnell

Bushnell Compact Instant Replay 11-8323 Bedienungsanleitung

Bushnell

Bushnell Model 26-0542 Bedienungsanleitung

Bushnell

Bushnell ImageView 118322 Bedienungsanleitung

Beliebte Fernglas Handbücher anderer Marken

Celestron

Celestron VistaPix 72218 Bedienungsanleitung

Levenhuk

Levenhuk Atom Digital DNM200 Bedienungsanleitung

ATN

ATN PS-15 Bedienungsanleitung

Bresser

Bresser TOPAS 7x50 Bedienungsanleitung

Berger & Schroter

Berger & Schroter LN-G3-B50 Bedienungsanleitung

Leica

Leica geovid 8x42 HD-R Bedienungsanleitung

Noblex

Noblex NF 8 x 42 inception Bedienungsanleitung

PHOTONIS

PHOTONIS VYPER Bedienungsanleitung

ATN

ATN 6015-WPT Bedienungsanleitung

Famous Trails

Famous Trails ViewCatcher DCB 822 Bedienungsanleitung

AGM

AGM EXPLORATOR FSB50-640 Bedienungsanleitung

Opticron

Opticron Marine-3 7x50 BIF.GA Installationsanleitung

Kayoba

Kayoba 009129 Bedienungsanleitung

Vixen

Vixen ARENA Series Bedienungsanleitung

MAGINON

MAGINON NVB 60 Bedienungsanleitung

Leica

Leica Geovid 56 Bedienungsanleitung

Leica

Leica GEOVID PRO Bedienungsanleitung

Celestron

Celestron LandScout Bedienungsanleitung