Bushnell SyncFocus 118326 Bedienungsanleitung

User Manual

Model#: 118326

LIT. #: 980917/0909

Digital Camera binoCular

Camera and Binocular Parts Guide

(I) USB

Port

(H) Remote

Jack

(J) Card

Slot

(G) Battery

Compartment

(M) Camera

Lens

(L) SNAP

Button

(K) Binocular

Focus

(A) LCD Display

(D) 5-way Keypad w/

“Enter”, Left/Right,

Plus/Minus

(F) Diopter

Adjustment

(B) ON/OFF

Button

(E) Reticle Focus

1) The SyncFocus is powered by two AAA batteries (not included). Insert batteries into the compartment (G), using the polarity

marks inside for reference. A power meter in the lower left corner of the display indicates battery condition.

2) Insert an SD card into slot (J) if greater storage is desired. The card will click into place. You may use SD cards (not MMC

cards) up to 2 GB capacity. If the card you insert was previously used in other devices, format it before taking photos. Press

the Enter button (D) to enter Play mode, then press the MENU button (C). Press the Minus key (D) once to select “Format”, then

press Enter. Note the warning that this will erase all les-make sure you have backed up any les you wanted to keep. Press

the Plus key (D) to select “OK”, then press Enter to format the card. Press Enter again to exit the Play mode.

3) Raise the LCD display (A), and press the ON/OFF button (B) briey. The camera will automatically turn itself o after two

minutes of inactivity (this can be changed using the “Auto O” option in the Setup menu).

4) To set the menu language, press the MENU button. Keep pressing the Plus or Minus key until you highlight “Language”,

press Enter, then press Plus to highlight your language and press Enter.

The Date/Time imprint feature is turned on by default. Press the Plus key to highlight “Clock Set” and press Enter. Now set

the Year, Month, Date, Hour and Minute (in order from left to right), using the Plus/Minus keys to make changes, and the

Right key to move to the next item. Once date & time are set, press the Enter button. Use “Date Stamp”to set your preference

(month rst, year rst or o) Press Enter then Exit the menu to return to the preview display. Reset the date/time if you replace

batteries.

5) Turn the reticle focus (E) until the black circle is sharp, then adjust the binocular focus (K) until your subject is sharp. Hold the

camera steady with both hands and press the SNAP button (L) to take a still photo. When using a tripod, you can help avoid

the eects of camera shake by plugging the supplied remote shutter release cable into the jack next to the SD card slot rather

than SNAP to take photos.

6) To shoot a video, press the Right key (D) three times until the red movie camera icon appears at the top right corner of the

display (see “LCD Preview Display Icons”-#10). You can then start shooting the video at any time by pressing the SNAP button.

QUICK START GUIDE: BUSHNELL SYNCFOCUS™ INSTANT REPLAY

To stop recording the video, press the SNAP button again. By default, videos are recorded as a 15 second loop (“instant

replay”). To change this, press MENU-the rst item is “Resolution”. Press Enter, then select “Video Size”. Use the Plus/Minus

keys to select a dierent video resolution and frame rate combination (which determines loop length-8, 15, 30 or 60 seconds).

You also have the option to select a “Norm”video setting if you prefer to shoot standard video clips, instead of loops that re-

record (refresh) automatically. For more information regarding the still and video resolution options and other menu

settings, please see the “Using the Main Menu” section of this manual.

7) To review or playback a still photo or video, press the Enter button. You will see the most recent still photo or video. To

review previous photos or videos one at a time, press the Left key. To play back a video, press the SNAP button (press again

to stop playback). To delete photos/videos, press MENU. Select Delete One (only the currently displayed photo/video) by

pressing Enter, then the Plus button to select “OK”, and press Enter to delete the le. If you wish to delete all photos/videos,

use the Format menu option as described earlier.

8) To download photos/videos to your PC, connect the USB cable from the SyncFocus to your computer. The SyncFocus will

be recognized as a standard “USB Mass Storage” device and will appear as a “Removable Disk” under the “My Computer” list

(on Macs, an icon will appear on your desktop). The photo les are located in the“DCIM” folder on this “Removable Disk”. Copy

the les to your hard drive (drag or use the “copy les” option), then disconnect the camera. (On Mac computers, drag the

“disk” that appeared on your desktop when the camera was connected into your Trash to “eject” it before disconnecting.) The

jpg standard les from the SyncFocus may be edited with any photo software you choose to use.

NOTE: If you are not using an SD card in the SyncFocus, be sure to download all les from its internal memory before changing batteries

and before storing the camera for a long period. If you use an SD card, photos may also be downloaded by removing the card and using

any USB card reader with an SD slot.

Your SyncFocus camera is already set for high resolution and quality right out of the box, and it is not necessary to

change any of the settings to get good results. However, many features and options are provided to enhance your

enjoyment of the camera. For more information about them, please refer to the remainder of this User Manual.

QUICK START GUIDE: BUSHNELL SYNCFOCUS™ INSTANT REPLAY

Loading Batteries

Turn the SyncFocus over, slide open the battery cover as indicated by the arrow, remove and set aside. Insert 2

AAA Alkaline or Lithium batteries into the compartment (G) in the direction indicated inside, then replace the

cover, sliding it back into place until it clicks. Note: Rechargeable NiMh type batteries may also be used, but

some may not deliver adequate current to power the camera and display. AAA NiMh batteries with a current

rating of 850 mAh or higher are recommended.

Inserting An SD Card

The camera can store from about 15 (at 2660x1920 resolution and“Best” quality) up to over 100 photos in the

internal memory, depending on resolution and quality settings. To expand the available storage, you may

add an optional SD (Secure Digital) memory card, with 2GB or lower capacity. The camera will not function if

a 4GB or higher capacity SD card is inserted. Do not use “MMC” cards, which look similar to SD cards. The card

is inserted into the slot (J) on the back of the camera pod (pull down the rubber cover ap-please refer to the

“Camera and Binocular Parts Guide” page), label side up with the “notched” corner on the right as indicated by

the card icon above the slot. Note: be sure the power is turned o before inserting or removing cards to prevent

possible loss of les or damage to the card. A new card will not require formatting, but a card that has been

previously used in other devices (cameras, mp3 players, etc) should be formatted by the SyncFocus before

you start taking photos (see the “Using the Review Menu” section for details). Note that formatting will erase all

les previously stored on the card, so be sure they have been downloaded and saved on your computer

rst if you wish to keep them.

BASIC SETUP

Setting the Date and Time/Date Stamp Feature

You may want to go into the main options menu and set the correct date and time before beginning to take

photos (or turn o the date stamp feature, as the default setting is“on”). To set date and time:

Raise the LCD display and press the1. ON/OFF (B) button.

Press2. MENU (C). Press the Minus key (D) 7 times to highlight “Clock Set”, and press the Enter button (D).

Now set the Year, Month, Date, Hour (24 hr format), and Minute, using the3. Plus/Minus keys to make

changes, and the Right key (D) to move to the next eld.

Once the date & time are set, press the4. Enter button.

Press the5. Minus arrow key once to highlight “Date Stamp”, press Enter, then highlight your preference

using the Plus/Minus keys: Month-Day-Year format, Year-Month-Day format, or OFF (the date will not be

stamped on your photos).

Press6. Enter, then press the Minus key twice to highlight “Exit” , then press Enter again to exit the menu

options and return to the“live” preview display.

Auto O (Power Save)

By default, the SyncFocus will automatically turn o if no buttons or controls have been pressed for two

minutes. This helps save power and extend battery life when the camera is accidently left on. However, when

you are rst learning to use the camera you may want power to remain on (until you press ON/OFF) as you

get familiar with the features and controls. To do this, enter the main menu as described above in “Setting

the Date...”, highlight “Auto O”, press Enter, and select “Cancel”. Press Enter, then exit the menu as described

above.

Setting the Reticle Focus and Diopter Adjustment

Before you begin taking photos, a few simple, one-time adjustments should be made to ensure that you

can get sharp photos of any subject by just using the main focus knob on the binoculars. This process will

compensate for any variations in the eyesight or vision of the individual user:

Leave the rubber eyecups in their “up” position if you are not wearing glasses, or roll them down if you1.

are. Grasp the left and right sides of the binocular, and pull them apart or push them together while

looking through the binocular to adjust the eyepiece spacing until your view is a single circular image.

Look through just the left side of the binocular-you will see a black ring (reticle) in the center. Point the2.

binocular at a plain, light background like the sky or a wall in your house.

Rotate the reticle focus (left eyecup-3. (E)) until the circular reticle appears as sharp as possible to your left

eye. This compensates for any dierence in between your vision and the correct focus for the camera.

Next, continuing to look through the left side only, aim at a distant object (preferably one containing4.

ne detail such as a tree or sign), and adjust the binocular’s center focusing knob (K) until it appears as

sharp as possible to your left eye.

Finally, view the same object through only the right side of the binocular, and rotate the diopter5.

adjustment (right eyecup-(F)) until it appears sharp to your right eye (do not touch the center focus knob

while doing this). This compensates for any vision dierences between your left and right eyes.

SYNCFOCUS SETUP (Reticle & Diopter)

Menu Display Language Options (English, Spanish, Italian, French, German)

The main menu also has an option to select your preferred language for all menu screens.

Once set, note the number on the left and right binocular tubes that the index mark on each eyecup is lined

up with. With the reticle focus and diopter adjustment set to these positions, you should be able to get sharp

photos/videos of a subject at any distance by simply adjusting the center focus knob while you look through

the binocular optics. There is no need to re-adjust the reticle focus or diopter adjustment, unless you share the

Syncfocus with another user, or if your eyes become tired over a long period of use.

The camera lens provides 8x magnication, which is the same power as the binocular’s optics, and it is aligned

so that an object centered in the binocular will also be centered in your photos or videos. Therefore, it is not

necessary to have the LCD turned on or even raised while you are shooting photos or videos. Reducing use of

the LCD will extend battery life signicantly.

SYNCFOCUS SETUP (Reticle & Diopter)

TAKING STILL PHOTOS

After completing the basic and Syncfocus setups as described in the previous pages, you are ready to take a

photo:

Raise the LCD display1. (A) and briey press and release the ON/OFF button-the startup screen will appear,

followed by the live image from the camera lens. The display also shows the battery condition, number

of photos remaining, and the current setting of various options. Please refer to “LCD Preview Display Icons”

for more details.

The SyncFocus will default to high resolution and quality settings, as well as “everything on automatic”2.

when it is turned on for the rst time, so you’re ready to take photos under most conditions with no need

to change anything. If you’d like to explore the various available options, see the manual section titled

“Using the Main Menu-Options and Settings” for directions regarding how to select and change settings

such as resolution, image quality and exposure.

You may compose your photo while looking through the binocular (the LCD does not need to be3.

on to take a photo). However, for the most accurate framing, checking the LCD preview display is

recommended.

Hold the camera as steady as possible with both hands and gently press the4. SNAP button. If possible,

attach the SyncFocus to a tripod and plug the supplied remote shutter cable into the remote jack (H) to

obtain the steadiest results (press the button on the remote to take a photo). The display will “freeze”

briey immediately after a photo is taken-this is normal while the image is being stored in the internal

or card memory.

The“remaining photos”4-digit counter in the lower left corner of the display above the battery indicator5.

will drop by one number after each photo (or two, depending on your subject and settings) is taken.

Once it reaches “0000”, and the display indicates “Memory Full !” when SNAP is pressed, you are out of

memory (storage space) and will need to download the photos you have taken so they can be deleted

to make room in the memory for new photos, or you may remove the lled up card and install another

SD card if you are on a trip away from your computer.

A digital zoom feature is available. Press the6. Plus arrow key to zoom in (you will see the result on the

LCD, and the digital zoom indicator bar moves towards“T” for“Telephoto”). Press the Minus arrow key to

zoom back out (the zoom indicator bar moves towards “W” for “Wide Angle”). To turn o all digital zoom

(go back to the 8x optical magnication only) keep pressing the Minus key until the zoom bar indicator

goes back fully left to “W” and disappears.

To review a photo after you take it, press the7. Enter button. To see previous photos, press the Left arrow

key-each press takes you back one photo, and pressing the Right arrow key moves forward to more

recent photos. Press the Enter button again to return to the live preview. See the section “Review Menu”

for directions covering deleting photos, formatting internal or card memory, and protecting important

photos.

NOTE: Use care during handling to avoid touching the camera lens (M), located in the center between the

binocular lenses, to prevent degrading the image quality. Clean the camera lens only with dry lens tissue or

microber cloth. DO NOT use liquids of any type.

TAKING STILL PHOTOS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bushnell Fernglas Handbücher

Bushnell

Bushnell ImageView 110833 Bedienungsanleitung

Bushnell

Bushnell Image View 11-8200 Bedienungsanleitung

Bushnell

Bushnell ImageView 11-8200 Bedienungsanleitung

Bushnell

Bushnell ImageView 118322 Bedienungsanleitung

Bushnell

Bushnell ENGAGE X-10x42 Bedienungsanleitung

Bushnell

Bushnell ImageView 11-1026 Bedienungsanleitung

Bushnell

Bushnell Night Vision 26-2036 Bedienungsanleitung

Bushnell

Bushnell 260140 Bedienungsanleitung

Bushnell

Bushnell Imageview 11-1025 Bedienungsanleitung

Bushnell

Bushnell 11-0512 Bedienungsanleitung

Bushnell

Bushnell IMAGE VIEW 118322 Bedienungsanleitung

Bushnell

Bushnell 205105; 205106 Bedienungsanleitung

Bushnell

Bushnell H2O 157050R Bedienungsanleitung

Bushnell

Bushnell LYNX 260401 Bedienungsanleitung

Bushnell

Bushnell 201930 Bedienungsanleitung

Bushnell

Bushnell Elite e2 Bedienungsanleitung

Bushnell

Bushnell Yardage Pro 20-1925 Bedienungsanleitung

Bushnell

Bushnell ImageView 118213 Bedienungsanleitung

Bushnell

Bushnell ImageView 11-1027 Bedienungsanleitung

Bushnell

Bushnell LEGEND BB842W Bedienungsanleitung

Bushnell

Bushnell 137570 Bedienungsanleitung

Bushnell

Bushnell BINOCULARS-MULTIPLE LANGUAGES Bedienungsanleitung

Bushnell

Bushnell Spectator Bedienungsanleitung

Bushnell

Bushnell ImageView 11-0718 Bedienungsanleitung

Beliebte Fernglas Handbücher anderer Marken

Celestron

Celestron VistaPix 72218 Bedienungsanleitung

Levenhuk

Levenhuk Atom Digital DNM200 Bedienungsanleitung

ATN

ATN PS-15 Bedienungsanleitung

Bresser

Bresser TOPAS 7x50 Bedienungsanleitung

Berger & Schroter

Berger & Schroter LN-G3-B50 Bedienungsanleitung

Leica

Leica geovid 8x42 HD-R Bedienungsanleitung

Noblex

Noblex NF 8 x 42 inception Bedienungsanleitung

PHOTONIS

PHOTONIS VYPER Bedienungsanleitung

ATN

ATN 6015-WPT Bedienungsanleitung

Famous Trails

Famous Trails ViewCatcher DCB 822 Bedienungsanleitung

AGM

AGM EXPLORATOR FSB50-640 Bedienungsanleitung

Opticron

Opticron Marine-3 7x50 BIF.GA Installationsanleitung

Kayoba

Kayoba 009129 Bedienungsanleitung

Vixen

Vixen ARENA Series Bedienungsanleitung

MAGINON

MAGINON NVB 60 Bedienungsanleitung

Leica

Leica Geovid 56 Bedienungsanleitung

Leica

Leica GEOVID PRO Bedienungsanleitung

Celestron

Celestron LandScout Bedienungsanleitung