Bushnell TROPHY CAM 119437C Bedienungsanleitung

TROPHY CAM™

INSTRUCTION MANUAL

Notice D’utilisation

Model/Modèle: 119437C / 119447C / 119476C / 119477C

VIDEO

Lit# 98-2294 / 07-12

Visit the Trophy Cam community website today, where you can:

• seemoreinformationaboutthecapabilitiesandapplicationsoftheBushnellTrophyCams

• discuss your Trophy Cam experiences with other users, share tips, belong to this new

worldwidecommunity

• discoveranimalsfromallovertheworld

• accessafreeservicetomanageyourTrophyCamphotos/videosonlineandhostyourphotos

(videosarehostedonYouTube)

www.bushnell.com/trophycam

Rejoignez la communauté Trophy Cam sur www.trophycam.fr pour :

• Trouverdesinformationssurl’utilisationetlescapacitésdevotreTrophyCam

• Partager vos expériences, vos conseils et astuces avec les autres utilisateurs de la

communautémondialeTrophyCam

• Découvrirdesanimauxdumondeentier

• Accéderàunserviceinternetgratuitpourgéreretpublierlesphotosetvidéosprisesavec

votreTrophyCam(vidéoshébergéessurYouTube)

www.trophycam.fr

TABLE OF CONTENTS / TABLE DES MATIÈRES PAGE

ENGLISH

FRANçAIS

4-40

41-81

IMPORTANT NOTE

Congratulations on your purchase of one of the best trail cameras

on the market! Bushnell is very proud of this little unit and we

are sure you will be pleased with it as well. We appreciate your

business and want to earn your trust. Please refer to the notes

below and the instructions in this manual to ensure that you are

completely satisﬁed with this product.

If your Bushnell Trophy Cam does not seem to be

functioning properly or if you are having photo/video quality

issues, please check the Troubleshooting/FAQ section

on pages 33-37.

Problems are often due to something simple that was

overlooked, or require only changing one setting to solve.

If your problem continues after trying the solutions in

the Troubleshooting/FAQ section, please call Bushnell

Customer Service at (800) 423-3537. In Canada, call (800)

361-5702.

Bushnell recommends using a full set of Energizer®Lithium AA

batteries (8 or 12, depending on the model) in these Trophy Cam

models to obtain maximum battery life

Do not mix old and new batteries

Do not mix battery types-use ALL lithium or ALL alkaline

Bushnell recommends using SanDisk®SD and SDHC Cards

(up to 32GB capacity, Ultra®or Extreme®series for HD video)

in these Trophy Cam models

INTRODUCTION

About the Trophy Cam

The Bushnell Trophy Cam is a digital scouting camera. It can be triggered by

any movement of game in a location, detected by a highly sensitive Passive

Infra-Red (PIR) motion sensor, and then take high quality pictures (up to 8MP

still photos), or video clips.

The Trophy Cam consumes very little power (less than 0.2 mA) in a stand-

by (surveillance) state. This means it can deliver up to six months stand-

by operation time when the device is powered by the full capacity of AA

alkaline batteries, and up to twelve months utilizing lithium AA batteries.

Once motion in the monitored area is detected, the digital camera unit will be

triggered at once (typically within one second) and then automatically take

photos or videos according to previously programmed settings. The Trophy

Cam is equipped with built-in infrared LEDs (“black” IR LEDs on models

119476/119477) that function as a ﬂash, so that it delivers clear photos or

videos (in black & white) even in the dark, and it can take color photos or

videos under sufﬁcient daylight. The Trophy Cam is designed for outdoor

use and is resistant against water and snow.

Your trail camera is one of the latest generation of Bushnell Trophy Cams,

and includes many new or improved features, including:

• Auto PIR Sensitivity-the camera monitors ambient temperature

conditions and automatically adjusts the sensor/trigger signal to be

more sensitive to slight variations in temperature on hot days, less

sensitive on cold days.

• Hyper NightVision-The IR LED Flash array now has increased range,

brighter output and better coverage for improved nighttime images.

• Field Scan 2x with Live Trigger-The “time lapse” feature added in last

year’s models has been enhanced with the addition of the option for

a second block of recording with its own start/stop times. Trigger

signals generated by nearby wildlife activity will still generate additional

photos/videos as they normally would, independently of the Field Scan

operation.

• GPS Geotag Capability-allows the user to input the longitude and

latitude of the camera’s position, which will be embedded in each

photo ﬁle. This enables Google Earth, Picassa and other geotag

enabled software to automatically show a map pinpointing each

camera’s location when a group of photos are reviewed on a computer.

Especially useful for those who setup multiple Trophy Cams to monitor

large or widely separated areas.

• Multi Flash Mode (LED Control)- prevents overexposed ﬂash photos in

close range applications

And many more features such as HD Video with Audio, widescreen or

fullscreen format still photos, imprintable camera name (user set) along with

current data including temperature, moon phase and barometric pressure*

(*imprinted barometer data only available on black LED models).

Applications

The Trophy Cam can be used as a trail camera for hunting or scouting

game. It is also suitable for surveillance usage.

PARTS AND CONTROLS

The Trophy Cam provides the following connections for external devices:

USB port, SD card slot, A/V Out, and external DC power in (pg 7, Fig. 1).

A 3-way power switch is used to select the main operating modes: OFF,

SETUP, and ON (pg 7, Fig. 2).

A control key interface with six keys is primarily used in SETUP mode to

select operational functions and parameters. As shown on the next page,

these keys are: UP, DOWN, LEFT, RIGHT, OK and MENU. Four of the keys

can also perform a second function (shortcut operations in SETUP mode) in

addition to their main function: The DOWN key can be used to set the camera

to Photo mode (still camera icon), and the UP key can set the camera to

Video mode (movie camera icon). The RIGHT key also serves as the manual

shutter (“SHOT”) button of the camera and the OK key switches the camera

to the Playback (“REPLAY”) mode. These secondary functions are indicated

by icons or text above the key as shown on the next page.

Fig. 2: Button and

Switch Guide

Fig. 1: Connections

USB Port

SD Card Slot

DC In

SETUP

OFF

LED IR Flash

Motion/ Low

Battery Indicator

Lens

Lock Hole Tripod Socket

DC in

Cover Plug

Video Mic

PIR Sensor

FRONT VIEW

INSIDE VIEW

LCD Screen

Power/Mode

Switch

UP/Video

DOWN/Photo

LEFT

OK/Replay

RIGHT/Shot

Cable to Battery

Compartment

Latch

Light

Sensor

A/V Out Video Mic

INSTALLING THE BATTERIES AND SD CARD

Before you begin learning how to use your Trophy Cam, you will ﬁrst need

to install a set of batteries and insert an SD card. Although that may only take

you a minute, there are some important notes about both batteries and SD

cards you should be aware of, so please take the time to read the following

directions and cautions:

Loading Batteries

After opening the two latches on the right side of the

Trophy Cam, you will see that the Trophy Cam has

eight or twelve battery slots, depending on your model.

For maximum battery life, you should install a full set

of batteries. The Trophy Cam may also be operated

by just four batteries installed in the ﬁrst slots only

(starting on the top or left-see photos). Battery life will

be shorter with 4 batteries, but the camera will operate

normally. Whether you use 4 or a full set, be sure

to insert each battery with correct polarity (negative

or “ﬂat” end against the long spring of each battery

slot).

Bushnell recommends using a full set of new lithium

AA (Energizer®brand) or alkaline AA batteries. NiMh

Rechargeable batteries are not recommended, as the

lower voltage they produce can cause operational

issues. It is also possible to use a lead-acid external

battery cell with 6V output or suitable AC adapter-see

below for more details.

Using an External Power Source (optional, user provided)

Optionally, you can connect an external 6V DC power source to the “DC In”

jack at the bottom of the Trophy Cam. It is recommended to use a power

source with a current output greater than 1550mA. However, during bright

daytime operation when no ﬂash is required, the Trophy Cam can function

with much less current ( >400mA). Please use a compatible power source

cable (not provided) to connect the external DC power source with the power

input jack of the Trophy Cam, making sure that the polarity is correct. Note:

The power connector is a 4.0x1.7mm coaxial DC power plug with positive

“tip” (inside pin) polarity (Radio Shack P/N 274-1532 or equivalent).

If both an external power source is connected and batteries are installed, the

Trophy Cam will be powered by the external power source.

When the batteries become weak, the low-battery indicator LED will glow

blue, indicating the batteries should be changed (pg 7, Front View).

Inserting the SD Card

The Trophy Cam has 32MB of internal memory, which can hold only about

20 photos (@ 5MP resolution). This is handy for testing and getting familiar

with the camera, but you will no doubt want to leave the camera unattended

for longer than a day, so using an SD card is recommended for all models.

Insert the SD card (with the camera’s power switch in the OFF position)

before beginning to operate the camera. Don’t insert or remove the SD card

when the power switch is in the ON position.

The Trophy Cam uses a standard SD (Secure Digital) memory card to save

photos (in .jpg format) and/or videos (in .avi format). SD and SDHC (High

Capacity) cards up to a maximum 32GB capacity are supported. High speed

SD cards are recommended if you will use the 1280x720 video resolution

setting (HD). Before inserting the SD card into the card slot after opening the

camera’s front cover, please make sure that the write-protect switch on the

side of the card is “off” (NOT in the “Lock” position). The following describes

how to insert and remove the SD card:

• Insert the SD card into the card slot with its label side upwards (see

below). A “click” sound indicates that the card is installed successfully.

If the wrong side of the card is facing up, you will not be able to insert

it without force-there is only one correct way to insert cards. If the SD

card is not installed correctly, the device will not display an SD card icon

on the LCD in SETUP mode (the SD card icon displayed after switching

to SETUP mode will have a “lock” symbol inside it in it if the card is locked).

Formatting the SD card by using the Trophy Cam’s “Format” parameter

before using it for the ﬁrst time is recommended, especially when a

card has been used in other devices (see “Changing Menu Parameter

Settings” for details).

• To take out the SD card, just gently push in the

card (do not try to pull it out without pushing

in ﬁrst). The card is released from the slot and

ready to be removed when you hear the click.

WARNING: Be sure the camera’s power is switched OFF

before inserting or removing SD cards or batteries.

USING THE TROPHY CAM

Once you’ve prepared your Trophy Cam by properly installing batteries and

an SD card, you could simply take it outside, strap it to a tree, switch it on

and leave-and you might get some great photos that are exactly what you

wanted. However, we highly recommend that you ﬁrst spend some additional

time indoors with this manual and your camera until you know a bit more

about what the 3-way switch and those control keys do. If nothing else, you’ll

probably want to at least set the date and time so the camera will imprint

them (or not-it’s your option) on your photos as they are taken, learn how to

set the camera to shoot video clips instead of still photos if you like, and read

some tips about mounting it on a tree.

THE OFF, ON, AND SETUP MODES

The Trophy Cam has three basic operational modes:

• OFF mode: Power switch in the OFF position.

• ON mode: Power switch in the ON position (LCD screen is off.)

• SETUP mode: Power switch at SETUP position (LCD screen is on).

OFF MODE

The OFF mode is the “safe” mode when any actions must be taken, e.g.,

replacing the SD card or batteries, or transporting the device. You will also

use OFF mode if you connect the camera to a computer’s USB port later

to download your photos/videos. And of course, when you are storing or not

using the camera, you will switch it to OFF. Please note that even in the OFF

mode the Trophy Cam still consumes power at a very low level. Therefore,

it’s a good idea to take the batteries out of the battery compartment if the

camera will not be used for a long time.

ON MODE

Anytime after the batteries and SD card have been inserted, you can switch

on the camera. When the power switch is moved to the top position, the

camera will enter into the ON (Live) mode. The motion indicator LED (pg. 6,

“Front View”) will blink red for about 10 seconds. This interval allows time for

you to close the Trophy Cam’s front cover, lock it, and leave the monitored

area. Once in the ON mode, no manual controls are needed or possible

(the control keys have no effect). The Trophy Cam will take photos or

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Bushnell Scouting-Kamera Handbücher

Bushnell

Bushnell CELLUCORE 20 Bedienungsanleitung

Bushnell

Bushnell TROPHY CAM HD ESSENTIAL 119736C Bedienungsanleitung

Bushnell

Bushnell 119437 Bedienungsanleitung

Bushnell

Bushnell Trophy Cam 119636C Bedienungsanleitung

Bushnell

Bushnell PRIME L20 Bedienungsanleitung

Bushnell

Bushnell Trail Sentry 119302 Bedienungsanleitung

Bushnell

Bushnell TROPHY 119598 Bedienungsanleitung

Bushnell

Bushnell 119437C Bedienungsanleitung

Bushnell

Bushnell CELLUCORE 30 Bedienungsanleitung

Bushnell

Bushnell Trail Sentry 119302 Bedienungsanleitung

Bushnell

Bushnell TRAIL SENTRY 119303 Bedienungsanleitung

Bushnell

Bushnell TRAIL SENTRY 11-9000 Bedienungsanleitung

Bushnell

Bushnell Trail Scout 11-9501 Bedienungsanleitung

Bushnell

Bushnell TROPHY CAM HD AGRESSOR 119873C Bedienungsanleitung

Bushnell

Bushnell Trophy Cam Agressor 11977 Bedienungsanleitung

Bushnell

Bushnell Trail Scout 11-9600 Bedienungsanleitung

Bushnell

Bushnell TROPHY CAM 119628C Bedienungsanleitung

Bushnell

Bushnell NatureView 119739 Bedienungsanleitung

Bushnell

Bushnell TROPHY CAM 119537 Bedienungsanleitung

Bushnell

Bushnell 119932C Bedienungsanleitung

Bushnell

Bushnell TRAIL SENTRY 11-9000 Bedienungsanleitung

Bushnell

Bushnell WIRELESS Trophy Cam HD Bedienungsanleitung

Bushnell

Bushnell TROPHY CAM 119425C2 Bedienungsanleitung

Bushnell

Bushnell CELLUCORE 20 SOLAR Bedienungsanleitung

Beliebte Scouting-Kamera Handbücher anderer Marken

Nestbox

Nestbox C13 Bedienungsanleitung

Wildview

Wildview STC-TGL1 Bedienungsanleitung

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Bedienungsanleitung

Suntek

Suntek HC-800M Bedienungsanleitung

Spypoint

Spypoint G4 Bedienungsanleitung

Duramaxx

Duramaxx 10029765 Bedienungsanleitung

Brecom

Brecom C2400 Bedienungsanleitung

BlazeVideo

BlazeVideo A280W Bedienungsanleitung

Bestok

Bestok 5210GM Bedienungsanleitung

GardePro

GardePro X60P Bedienungsanleitung

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Bedienungsanleitung

PNI

PNI HUNTING 280C Bedienungsanleitung

Muddy

Muddy Pro-Cam 14 Bedienungsanleitung

Bresser

Bresser 3310006 Bedienungsanleitung

Recon Outdoors

Recon Outdoors HS410 Bedienungsanleitung

Braun

Braun 57660 Bedienungsanleitung

Wildgame

Wildgame Shadow Bedienungsanleitung

Spypoint

Spypoint FLEX Bedienungsanleitung