| Black Max Compressor
Page 4
General Operating Instructions (please read)
Important:
Always operate the compressor within its maximum pressure rating. Refer to
the specications section of this manual for details. Operations exceeding
maximum pressure rating will result in damage to air compressor and
void warranty.
Your air compressor is equipped with an automatic thermal overload protector.
This feature is designed to protect the air compressor from over-heating and
causing permanent damage to your air compressor. The thermal overload
protector will automatically cut off power to air compressor should internal
operating temperature rise above safe levels during excessive use.
Should at any time during usage your air compressor automatically shut down,
do not attempt to restart air compressor. Turn off the power switch. The
automatic thermal overload protector will automatically reset when internal
temperature of the air compressor drops to safe levels. After allowing air
compressor to cool off for about 15 minutes, you can safely resume usage of the
air compressor by turning on the power switch – your warranty will be void if this
instruction is not followed.
It is strongly recommended that you keep the vehicle’s engine running while
using the air compressor to prevent discharge of your vehicle’s battery. This
means you should ONLY OPERATE THE AIR COMPRESSOR IN WELL VENTILATED
AREAS. Compressor performance is also enhanced when operating with the
vehicle’s engine running.
Please note that you may experience a slight delay (about 3 sec) to the
compressor’s motor starting when the compressor is pressurised, (i.e. when
there is back pressure in the air line) This is a normal delayed reaction, not a
compressor on/off switch malfunction
1.
2.
3.
4.
5.
Please read and follow the operating instructions carefully to understand and get
the most from your Black Max Compressor.
