BZB Gear BG-UDAIC-E14 Bedienungsanleitung

BG-UDAIC-E14

1X4 4K60 UHD 18Gbps HDMI Splitter & Distribution Ampliﬁer

up to 230ft

User Manual

BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 2

BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL

TABLE OF CONTENTS

Statement 4

Safety Precaution 4

Introduction 5

Features 5

Packing List 5

Speciﬁcations 6

Panel Description 7

Installation Procedures 9

Control Settings 10

FAQ 12

Tech Support 13

Warranty 14

Mission Statement 15

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 3

BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL

Statement

Please read these instructions carefully before connecting, operating, or conﬁguring this

product. Please save this manual for future reference.

Safety Precaution

●To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion

during transportation, storage, and installation.

●The housing of this product is made of organic materials. Do not expose to any liquid,

gas, or solids which may corrode the shell.

●Do not expose the product to rain or moisture.

●To prevent the risk of electric shock, do not open the case. Installation and maintenance

should only be carried out by qualiﬁed technicians.

●Do not use the product beyond the speciﬁed temperature, humidity, or power supply

speciﬁcations.

●This product does not contain parts that can be maintained or repaired by users.

Damage caused by dismantling the product without authorization from BZBGEAR is not

covered under the warranty policy.

●Installation and use of this product must strictly comply with local electrical safety

standards.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 4

BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL

Introduction

The BG-UDAIC-E14is an extender splitter kit that distributes 1 HDMI input to 4 HDMI

outputs and extends these signals up to 230 feet (70m). The kit supports resolutions up to

4K@60Hz and the transmitter is also equipped with an HDMI loop out to view the content

near the source. The unit is also capable of bi-directional IR, advanced EDID, and RS232

control .

Features

●Zero latency transmission

●Split and extend 1 HDMI input signal to 4 HDMI outputs

●Up to 4K@60Hz resolutions

●Transmission distance up to 230 feet or 70 meters by using Cat6/6A/7 cables

●Bi-directional IR

●HDMI loop out

●Audio extraction from the TV or source device on the receiver end via S/PDIF.

●EDID passthru or manually set the EDID

●RS-232 command control

●Surge Protection, Lightning Protection, ESD Protection

●Equipped with rack mount ears

Packing List

1. 1x HDMI Splitter Extender TX

2. 4x HDMI Splitter Extender RX

3. 1x User Manual

4. 1x DC12V/2A

5. 4x DC5V/2A

6. 1x Terminal Block (RS-232)

7. 1x IR Blaster Extension Cable

8. 4x IR Receiver Extension Cable

9. 20x Mounting Brackets

10. 40x Screw

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 5

BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL

Speciﬁcations

Item

Speciﬁcation

Transport protocol

ipcolor

Split mode

1 IN 4 OUT

Transmission Distance

CAT6/6A/7<70m

HDMI signal

HDMI 2.0, HDCP2.2

Resolution

480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,

1080p@50/60Hz, 1280x960, 1280x800, 1280x768, 1680x1050, 1360x768, 1366x768, 1600x900,

1024x768,800x600, 3840x2160@24/25/30/50/60Hz, 4096x2160@24/25Hz

Audio formats

LPCM/DTS-HD/DTS-Audio/Dolby Digital 5.1

Bi-directional IR passback (20-60khz)

RS-232

3-pin: TxD-RxD-GND, follows RS-232 levels

Working Temperature

-20~60°C

Storage Temperature

-30~70°C

Humidity (no

condensation)

0~90%

Protection

ESD protection

1a Contact discharge level 3

1b Air discharge level 3

Implementation of the standard: IEC 61000-4-2

Lightning protection

Surge protection

Power supply

TX: DC 12V/2A RX: DC 5V/2A

Power consumption

TX<13W RX<4W

Material

Aluminum alloy material + crystal panel

Color

Black

Weight

TX: 640g RX: 210g

Dimension

TX: 264.00(L) x 104.00(W) x 23.50(H)mm

RX: 106.0(L) x 99.0(W) x 26.2(H)mm

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 6

BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL

Panel Description

Transmitter (TX)

No.

Name

Function Description

Power indicator

The blue light will illuminate when powered on

Reset button

Restarts the device

IR in

Connect to the IR receiver extension cable

IR out

Connect to the IR blaster extension cable

RJ45 output port

Connect using CAT 6/6a/7 network cables

HDMI output port

Connects to a local HDMI display device using an HDMI cable

HDMI input port

Connects to an HDMI source device using an HDMI cable

EDID DIP switch

Conﬁgure output resolution using the EDID DIP switch

RS-232 Port

Connects to an external device to control the transmitter

Power

Connects to the supplied DC 12V/2A power adapter

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 7

BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL

Receiver (RX)

No.

Name

Function Description

Reset button

Restarts the device

Audio switch

Choose the audio source (output from the S/PDIF port)

S/PDIF: From the source device

ARC: From the TV (receiver end)

RJ45 signal input

Connect using CAT 6/6a/7 network cables

Power/Signal

indicator

When the device is powered on, the blue indicator light will be solid

if the HDMI signal is detected. If the HDMI signal is not detected,

the light will ﬂash.

Power

Connects to the supplied DC 5V/2A power adapter

S/PDIF output

Connect to a speaker or ampliﬁer

HDMI output

Connects to an HDMI display device

IR in

Connect using an IR receiver extension cable

IR out

Connect using an IR blaster extension cable

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 8

BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL

Installation Procedures

Connection Diagram

Connection Instructions

1. Connect the source device to the transmitter's HDMI IN port using an HDMI cable.

2. Connect the transmitter's CAT6 OUT port to the receiver's CAT6 IN port using

network cables.

3. Connect the receiver's HDMI OUTPUT port to the display devices using HDMI

cables.

4. If using an HDMI loop out, connect the transmitter's LOOP OUT port to the display

using an HDMI cable.

5. If using the RS-232 control, connect the transmitter's RS-232 port to the external

control device.

6. Plug the power into the devices.

IR User Guide

1. The IR blaster extension cable connects to the IR OUT port of the transmitter or

receiver. The IR receiver extension cable connects to the IR IN port of the transmitter

or receivers.

2. The emitter of the IR blaster extension cable is recommended to be as close as

possible to the IR receiving window of the target device.

3. Point the remote control at the receiving head of the IR receiver extension cable to

operate.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 9

BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL

Control Settings

RS232 Settings

The default conﬁguration is as follows:

Baud rate: 9600 / Data bits: 8 / Stop bits: 1 / Parity: 0

Control Commands

Function Descriptions

ES XX On/n

Turn on the network signal output port(s), choose from “01” to “04” (the network ports from

right to left are: 01, 02, 03, 04.);

“All” means all four ports

ES XX Oﬀ/n

Turn oﬀ the network signal output port(s), choose from “01” to “04” (the network ports from

right to left are: 01, 02, 03, 04.);

“All” means all four ports

Reset/n

Restart the device

Recover/n

Restore device to factory settings

Baud XX /n

Set the baud rate value: 9600 (default), 19200, 38400, 57600, 115200

Examples of control commands are shown below:

Control Command

ES 04 On/n

Function Description

Turn on network signal output port 04

Return Values

Received

successfully

ES 04 On OK

Receive failed

ES 04 On FAIL

Control Command

ES All Oﬀ/n

Function Description

Turn oﬀ all the network signal output ports

Return Values

Received

successfully

ES All Oﬀ OK

Receive failed

ES All Oﬀ FAIL

Control Command

Reset/n

Function Description

Restart the device

Return Values

Received

successfully

Reset OK

Receive failed

Reset FAIL

Control Command

Baud 19200/n

Function Description

Set the baud rate value: 9600

Return Values

Received

successfully

Baud 19200 OK

Receive failed

Baud 19200 FAIL

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 10

Inhaltsverzeichnis

Andere BZB Gear Verstärker Handbücher

BZB Gear

BZB Gear BG-UDA-E18 Bedienungsanleitung

BZB Gear

BZB Gear BG-AMP2X50 Bedienungsanleitung

BZB Gear

BZB Gear BG-DA-12GS1X8 Bedienungsanleitung

BZB Gear

BZB Gear BG-DA-12GS1X4 Bedienungsanleitung

BZB Gear

BZB Gear BG-DA-12GS1X2 Bedienungsanleitung

BZB Gear

BZB Gear BG-AMPC40 Bedienungsanleitung

BZB Gear

BZB Gear BG-HDA-E18 Bedienungsanleitung

BZB Gear

BZB Gear BG-DA-12GS1X2 Bedienungsanleitung

BZB Gear

BZB Gear BG-HDA-E14 Bedienungsanleitung

BZB Gear

BZB Gear BG-AMP2X20 Bedienungsanleitung

BZB Gear

BZB Gear BG-AMPC40 Bedienungsanleitung

BZB Gear

BZB Gear BG-DA-12GS1X4 Bedienungsanleitung

BZB Gear

BZB Gear BG-UDA-E14 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung