BZB Gear BG-A1616MD Bedienungsanleitung
BG-A1616MD
16x16 Digital Audio Processor with DANTE
User Manual
BZBGEAR BG-A1616MD PRODUCT MANUAL
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 2
BZBGEAR BG-A1616MD PRODUCT MANUAL
Table of Contents
Statement 4
Safety Precaution 4
Introduction 5
Features 5
Package Contents 6
Specifications 6
Device Interface Descriptions 7
Computer Control 8
Volume Meter 9
Input Settings 10
Expander 11
Equalizer 12
Compressor 14
Auto Gain Control 15
Auto Mixer 16
Adaptive Feedback Cancellation 17
Adaptive Echo Cancellation 18
Adaptive Noise Suppression 19
Matrix Mixer 20
Output Settings 21
Two-way Crossover 22
Delay 23
Limiter 24
Scene Management 25
Serial Settings 26
Control Commands 27
GPIO Setting 27
Reset Setting 28
Dante® Controller Instructions 28
TCP/IP Control Command 30
RS-232 Control Command 36
Troubles and Solutions 41
Application Example 41
Tech Support 42
Warranty 42
Mission Statement 43
Copyright 44
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 3
BZBGEAR BG-A1616MD PRODUCT MANUAL
Statement
Please read these instructions carefully before connecting, operating, or configuring this
product. Please save this manual for future reference.
Safety Precaution
●To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion
during transportation, storage, and installation.
●The housing of this product is made of organic materials. Do not expose to any liquid,
gas, or solids which may corrode the shell.
●Do not expose the product to rain or moisture.
●To prevent the risk of electric shock, do not open the case. Installation and maintenance
should only be carried out by qualified technicians.
●Do not use the product beyond the specified temperature, humidity, or power supply
specifications.
●This product does not contain parts that can be maintained or repaired by users.
Damage caused by dismantling the product without authorization from BZBGEAR is not
covered under the warranty policy.
●Installation and use of this product must strictly comply with local electrical safety
standards.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 4
BZBGEAR BG-A1616MD PRODUCT MANUAL
Introduction
The BG-A1616MD is a digital audio processor which offers 12-ch dedicated balanced
MIC/linear inputs, 12-ch dedicated balanced linear outputs and 2 standard DANTE network
audio interfaces. The BG-A88M also supports an 8-ch programmable GPIO for a further 4
inputs or outputs.
This audio processor features adaptive feedback suppression, full-band adaptive
acoustic echo cancellation, and dynamic adaptive noise reduction technology. The Auto
Mixer function allows users to set a priority when multiple microphones are used.
The BG-A88M includes various digital signal processing features such as an Expander,
Equalizer, Compressor, Auto Gain Control, Limiter, High Pass Filter, Low Pass Filter, and
Delay. It also supports matrix routing, volume control, metering, scene control, and more. It
can provide a 48V phantom power supply for the 12 MIC inputs, has a 48KHz sampling
rate, and 24-bit A/D or D/A conversion.
The included control software is compatible with Windows 7/10/11 operating systems.
The unit can also be connected and controlled via the network using a standard RJ45
interface or via RS-232 control using serial commands.
Features
●12-ch balanced MIC/linear inputs and 12-ch balanced linear outputs
●Two standard DANTE network audio interfaces
●Adaptive feedback suppression function
●Full-band adaptive acoustic echo cancellation technology
●Dynamic adaptive noise reduction technology to reduce noise with signal levels up
to 18dB
●The Auto Mixer function can set the priority of multiple microphone inputs at once
●Digital signal processing modules such as Expander, Equalizer, Compressor, Auto
Gain Control, Limiter, High Pass Filter, Low Pass Filter, and Delay are included
●Audio matrix routing
●Volume control, meter, scene control, etc.
●48V phantom power supply for 12-ch MIC inputs
●48KHz sampling rate, 24-bit for A/D or D/A conversion
●8-ch programmable GPIO function
●Software compatible with Windows 7/10/11 and controlled standard RJ45 interface
●RS-232 serial commands control
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 5
BZBGEAR BG-A1616MD PRODUCT MANUAL
Package Contents
①1 x BG-A1616MD with DANTE
②1 x AC 100~240V 50/60Hz Power Cord
③1 x 3-pin 3.81mm Phoenix Connectors (Male)
④1 x 10-pin 3.81mm Phoenix Connectors (Male)
⑤6 x 12-pin 3.81mm Phoenix Connectors (Male)
⑥2 x Mounting Ears (Rack Mount)
⑦8 x Machine Screws (KM3*4)
⑧1 x User Manual
Specifications
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 6
Technical
Amplitude-frequency
(20Hz~20KHZ@+4dBu)
±0.2dB
THD+N (1KHZ@+4dBu)
≤ 0.01%
SNR (linear input)
≥ 90dB
Dynamic Range
≥ 100dB
Channel Level Difference
±0.5dB
Channel Isolation
≥ 80dB
Max Input Level
20dBu
Max MIC Gain
40dB
Input Impedance
20KΩ
Output Impedance
300Ω
Sampling Frequency
48KHZ
A/D and D/A Conversion
24Bit
Phantom Power
+48 VDC
Connection
Inputs
12 × Balanced MIC/LINE [3-pin phoenix connector] or 6 × Stereo
Audio [3-pin phoenix connector]
Outputs
12 × Balanced LINE [3-pin phoenix connector] or 6 × Stereo
audio [3-pin phoenix connector]
Controls
1 × LAN [RJ45]
1 × RS-232 [3-pin phoenix connector]
8 × GIPO [10-pin phoenix connector]
Digital Audio Interfaces
2 × Dante [RJ45]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
440mm (W)×250mm (D)×45mm (H)
Weight
3.37kg
Power Supply
AC 100 - 240V 50/60Hz
Power Consumption
11W (Max)
Operating Temperature
0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature
-20°C ~ 60°C / -4°F ~ 140°F
BZBGEAR BG-A1616MD PRODUCT MANUAL
Device Interface Descriptions
Front Panel
No.
Name
Function Description
1
POWER LED
When the device is powered on, the red LED will
illuminate.
2
STATUS LED
When the device is running normally, the green STATUS LED
will flash.
Rear Panel
No.
Name
Function Description
1
MIC +48V
12 phantom power supply indicators.
2
MIC/LINE
INPUTS
12-ch balanced MIC/linear inputs, used for connecting
audio source devices via phoenix connectors.
3
OUTPUT
12-ch balanced linear outputs, used for connecting
Amplifiers or speakers via phoenix connectors.
4
DANTE
2 Standard DANTE network audio transmission interfaces.
5
LAN
Standard RJ45 interface for network connection.
6
RESET
Used for resetting the audio processor.
7
GND
Connect outer housing to the ground.
8
Power
Switch &
Power Port
Power switch and AC 100-240V power input port.
9
GPIO
8-ch programmable GPIO interfaces.
10
RS-232
Connect to PC or control system for transmitting RS-232
control commands.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 7
BZBGEAR BG-A1616MD PRODUCT MANUAL
Computer Control
Connection
The BG-A1616MD audio processor can be controlled via the provided software on a
Windows 7/10/11 machine. Use a category cable to directly connect to the LAN port of the
processor to your computer or via your local network using the following steps.
Step 1: Install the
“BZBGEARAudioMatrix16.exe” application
on the host computer and change the
computer’s IP address to ensure that IP
addresses of the host computer and the processor (Default IP address: 192.168.0.199,
Subnet mask: 255.255.255.0) are within the same network segment, as shown in the figure
below.
Step 2: Double-click the “BZBGEARAudioMatrix16.exe” icon to run the application on the
host computer.
Step 3: When the application is opened the HOME page will appear as shown below.
Step 4: Click the Network icon on the toolbar at the top .
If there is a red X at the top-right corner of the icon as shown in the figure above, it means
the host computer has not connected with the audio processor.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 8
BZBGEAR BG-A1616MD PRODUCT MANUAL
In such a case, click the icon and a dialog box with a list of IP addresses of all connected
devices will pop up, as seen in the following image.
Step 5: Choose the audio processor’s IP address and click CONNECT, then the processor
will be connected with the host computer. After connection, the CONNECT & SETUP box
(see the figure below) will pop up. You may close it if no such operation is needed.
If the audio processor has been connected with the host computer successfully, the
Network icon will appear as shown below with a green check in the top right corner.
Volume Meter
The volume meters will display the signal level of the various input & output volumes.
The meter has 3 colors (Red, Yellow, and Green) to denote signal levels for the volume
of the 16 inputs and 16 outputs. Red means that volume may be too high to be limited,
yellow indicates the volume is ideal, while green is within a reasonable lower range.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 9
BZBGEAR BG-A1616MD PRODUCT MANUAL
Input Settings
As shown below, clicking the INPUT module on the HOME page or the “IN” tab on
the menu bar will open the INPUT setting page.
The following figure shows the details of the INPUT setting page.
GAIN CONTROL: Indicates the GAIN level of the input signal which can be adjusted.
INVERT: Inverts the polarity of the signal on the input channel.
PHANTOM: Turns on 48V phantom power for the channel.
MUTE: Mutes the input channel, equivalent to clicking the letter M on the INPUT module
on the HOME page.
WHITE: Generates white noise for signal testing.
PINK: Generates pink noise for signal testing.
SINE: Generates a sinusoidal signal for testing and the meter below shows the frequency of
the sine wave.
FADER: Controls the signal level of the test signal.
You can set the signal parameters of an input channel by entering its “CHAN” number in the
menu on the right of the “IN” page. Audio process modules such as EXPANDER,
EQUALIZER, COMPRESSOR and AUTO GAIN CONTROL, are also available in the right
panel.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 10
Inhaltsverzeichnis
Andere BZB Gear Computerhardware Handbücher
BZB Gear
BZB Gear BG-AU88-MA Bedienungsanleitung
BZB Gear
BZB Gear BG-UHD-VW29 Bedienungsanleitung
BZB Gear
BZB Gear BG-MKVM41R Bedienungsanleitung
BZB Gear
BZB Gear BG-AVTPG-KIT Bedienungsanleitung
BZB Gear
BZB Gear BG-A88M Bedienungsanleitung
BZB Gear
BZB Gear BG-UHD-VW24 Bedienungsanleitung
BZB Gear
BZB Gear BG-UHD-VW24 Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
