BZB Gear BG-MAESTRO Bedienungsanleitung
BG-MAESTRO
Educational Auto Tracking ePTZ Camera
User Manual
1
Attention
This manual introduces functions, installations and operations for this camera in details.
Please read this manual carefully before installation and use.
1. Cautions
1.1 Avoid damage to product caused by heavy pressure, strong vibration or immersion during
transportation, storage and installation.
1.2 Housing of this product is made of organic materials. Do not expose it to any liquid, gas or solids
which may corrode the shell.
1.3 Do not expose the product to rain or moisture.
1.4 To prevent the risk of electric shock, do not open the case. Installation and maintenance should
only be carried out by qualified technicians.
1.5 Do not use the product beyond the specified temperature, humidity or power supply
specifications.
1.6 Wipe it with a soft, dry cloth when cleaning the camera lens. Wipe it gently with a mild detergent
if needed. Do not use strong or corrosive detergents to avoid scratching the lens and affecting the
image.
1.7 This product contains no parts which can be maintained by users themselves. Any damage
caused by dismantling the product by user without permission is not covered by warranty.
2. Electrical Safety
Installation and use of this product must strictly comply with local electrical safety standards.
The power supply of the product is ±12V, the max electrical current is 2A.
3. Install
3.1 This product should be placed on a stable desktop or other horizontal surface. Do not install the
product obliquely, otherwise it may display inclined image.
3.2 Do not power on before completely installation.
4. Magnetic Interference
Electromagnetic fields at specific frequencies may affect the video image. This product is Class A.
It may cause radio interference in household application. Appropriate measure is required.
2
Content
1. Product Overview ………………………………………………………………………………..3
1.1 System Introduction ………………………………………………………………………3
1.2 Main Features …………………………………………………………………………….3
1.3 Mounting Brackets ………………………………………………………………………..4
2. Interface Introduction …………………………………………………………………………..5
3. Dimension ……………………………………………………………………………………….6
4. System Connection ………………………………………………………………………………7
4.1 Installation Layout ……………………………………………………………………….7
4.2 System Wiring ……………………………………………………………………………8
5. Network Connection .……………………………………………………………………………7
5.1 Connection Mode …………………………………………………………………………8
5.2 Web Browser Login …………………………………………………………………….10
5.3 Browser Preview ………………………………………………………………………..10
5.4 Browser Configuration ………………………………………………………………….11
5.4.2 Video Configuration …………………………………………………………………………………11
5.4.3 Network Configuration ……………………………………………………………………………..14
5.4.4 System Configuration ……………………………………………………………………………….15
5.5 Logout ……………………………………………………………………………………………………16
5.6 Configure Tracking Parameter ………………………………………………………….17
Set up process ………………………………………………………………………………17
5.6.1 Teacher Tracking Configuration …………………………………………………………………..18
5.6.2 Student Tracking Configuration ……………………………………………………………………22
6. Description of Recording and Broadcasting Host ……………………………………………..25
6.1 Auto Tracking Control …………………………………………………………………………………25
6.2 Action Code Docking ………………………………………………………………………………….25
7. Technical Parameter ……………………………………………………………………………26
8. Maintenance and Troubleshooting ……………………………………………………………..27
8.1 Camera Maintenance …………………………………………………………………….27
8.2 Troubleshooting…………………………………………………………………………. 27
9. Warranty….............…………………….………………………………………………….……29
10. Mission Statement….............…………………………………………………………….……29
11. Copyright Statement….............………………………………………………………………29
3
1. Product Overview
1.1 System Introduction
Th BG-MAESTRO combines 4K ultra-definition imaging, video analysis technology and
electronic PTZ control technology to enable a single camera to output close-up main stream,
close-up sub-stream, panoramic main stream, panoramic sub-stream and blackboard stream
simultaneously. This camera can track and detect accurately and quickly, and fully meet the
requirements of various scenes of teaching recording and remote interactive teaching.
1.2 Main Features
Intelligent lecturer tracking: Built-in image recognition and tracking algorithm allows the
camera to track targets quickly and accurately without the need for auxiliary positioning
cameras or a tracking host.
Strong anti-interference ability: Once the tracking target is locked, it is resistant to
acquisition of interfering subjects.
●Smooth tracking: The sensitivity of action can be adjusted and it will not be affected by
target’s minor movement or gestures.
●Strong environmental adaptability: The tracking performance is not affected by
classroom’s size, shape or seats layout.
●Intelligent director: Built-in intelligent director switching strategy;
●Multiple tracking modes: Support multiple tracking modes, including tracking mode, movie
mode and area tracking mode.
●Ultra HD: 1/2.8 inch high quality 4K CMOS sensor; support 1080P@30fps/25fps image
output.
●Wide view angle and distortion-free lens: Using ultra wide-angle, distortion-free camera;
supports 3X digital zoom and EPTZ control at the same time;
●Low noise and high SNR: Low Noise CMOS effectively ensure high SNR of camera video.
Advanced 2D/3D noise reduction technology is used to further reduce the noise, while
ensuring image sharpness.
●Multiple video compression: H.265, H.264, MJPEG;
●Multiple video outputs: Supports SDI, USB3.0 and LAN (Gigabit);
●Multiple streams: Supports five streams, simultaneously outputs close-up main stream,
close-up sub-stream, panoramic stream, panoramic sub-stream and blackboard writing
stream;
●POE support: A single network cable can support power, control, and video output
simultaneously, thus simplifying wiring installation.
●Multiple installation: Wall mount and in-ceiling mount for options.
●Networking control interface: Controlling via Network can meet different deployment of
various scenarios.
●Wide application: Lecturer capture, remote interactive teaching etc.
4
1.3 Mounting Brackets
5
2. Interface Introduction
Figure 1.1 Product Interface
1. Camera Lens
5.SDI Interface
9. RS232/ RS485
2. Tripod Screw Hole
6. LAN Interface
10. Power Interface
3. Tripod Screw Hole
4. USB3.0 Interface
7. Reset button
8. A-IN
11. Power Indicator
6
3. Dimension
7
4. System Connection
4.1 Installation Layout
Teacher tracking camera is installed at 1.6 –2.1m (5 –7 feet) from ground(distance from panoramic
lens to ground), and the distance from the blackboard is 5 -9 m (15 –30 ft). Teacher tracking camera
should be installed as close to the center of the classroom as possible to achieve the best result.
(Supports ceiling mounting)
8
4.2 System Wiring
The teaching tracking camera products provide a smart camera solution for education
environments, and customers can select all or some products as needed. Different combinations of
products meet the demands of customers’ in various scenarios.
5. Network Connection
5.1 Connection Mode
Direct connection: Connect the camera directly to the computer by using an ethernet cable.
Internet connection mode: Connect the camera and computer to a router or switch and access via
the local area network (LAN).
Note: Ensure power and network connections are secured to prevent video issues caused by poor
connection quality.
The computer must be on the same subnet as the camera to connect successfully. The device will
not be accessible otherwise. The camera default IP address is 192.168.5.163, therefore the computer
must be connected to the 192.168.5.x subnet.
9
To connect to the camera, open the Local Area Connection Properties on the computer.
For Windows users right-click on the internet connection in the lower right corner of the desktop.
Select “Open Network & Internet Settings.”
Select “Change Adapter Options.”
Right-click on your connection (Wi-Fi or Ethernet) and select “Properties.”
Select “Internet protocol version 4 (TCP/IPv4)” as shown below and click “Properties.”
For the following steps refer to the diagram below.
Click on the bubble for “Use the following IP address.”
In the IP address field enter a non-conflicting IP address on the same subnet as the camera. If there
is another device with the same IP address you will not be able to connect. In the example below
we are using 192.168.5.200
In the Subnet mask field enter 255.255.255.0
In the Default gateway field type 192.168.5.1
You can leave the DNS fields blank.
Click OK to apply your settings.
Note: When you are finished configuring the camera you will need to return to this screen and click
the bubbles for “Obtain an IP address automatically” and “Obtain DNS server automatically”
to restore internet connectivity to your computer. Also make sure to reconnect any ethernet cables
Andere Handbücher für BG-MAESTRO
1
Inhaltsverzeichnis
