BZB Gear BG-UM88-100M-KIT Bedienungsanleitung

BG-UM88-100M-KIT

8X8 4K 18Gbps UHD HDMI/HDBaseT/Audio Matrix Switcher with

2-Way IR/ARC/Ethernet/IP and RS-232 Control

User Manual

BZBGEAR BG-UM88-100M-KIT PRODUCT MANUAL

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 2

BZBGEAR BG-UM88-100M-KIT PRODUCT MANUAL

TABLE OF CONTENTS

Statement 4

Safety Precaution 4

Introduction 5

Packing List 6

Speciﬁcations 7

Operation Controls and Functions 8

IR Remote 11

IR Control System 13

IR Cable Pin Assignment 15

EDID Management 15

Matrix Audio and RS-232 Introduction 17

Web GUI User Guide 19

RS-232 Control Commands 28

Application Example 34

Tech Support 35

Warranty 35

Mission Statement 35

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 3

BZBGEAR BG-UM88-100M-KIT PRODUCT MANUAL

Statement

Please read these instructions carefully before connecting, operating, or conﬁguring this

product. Please save this manual for future reference.

Safety Precaution

●To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion

during transportation, storage, and installation.

●The housing of this product is made of organic materials. Do not expose to any liquid,

gas, or solids which may corrode the shell.

●Do not expose the product to rain or moisture.

●Unplug this device during lightning storms

●Clean only with a soft dry microﬁber cloth.

●To prevent the risk of electric shock, do not open the case. Installation and maintenance

should only be carried out by qualiﬁed technicians.

●Do not use the product beyond the speciﬁed temperature, humidity, or power supply

speciﬁcations.

●This product does not contain parts that can be maintained or repaired by users.

Damage caused by dismantling the product without authorization from BZBGEAR is not

covered under the warranty policy.

●Installation and use of this product must strictly comply with local electrical safety

standards.

●Only use accessories speciﬁed by the manufacture

●Product speciﬁcations may be subject to technical upgrades without further notice

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 4

BZBGEAR BG-UM88-100M-KIT PRODUCT MANUAL

Introduction

The BG-UM88-100M-KIT is a 4K UHD 8X8 HDMI HDBaseT matrix switch that can connect

eight HDMI sources to sixteen displays. This device features eight HDMI outputs mirrored to

eight simultaneous HDBaseT outputs. The HDBaseT outputs can extend a 4K@60Hz 4:4:4

video signal at distances up to 328 feet (100 meters) over a single Cat5e/6/7 cable.

This product is equipped with many advanced features including a 4K to 1080P

down-scaler as well as smart EDID management for easy integration. This unit also oﬀers

audio de-embedding from any of the HDMI sources via analog audio and digital coaxial

audio outputs.

Each extender features bi-directional IR, RS-232, and 2 LAN ports for IP control. The base

unit can be operated using the front panel controls and OLED screen as well as IR, RS-232,

IP control, and web interface.

Features

●HDMI 2.0b, HDCP 2.2, and HDCP 1.4 compliant

●8 HDMI inputs, 8 HDMI outputs and 8 HDBaseT mirrored outputs

●Resolution up to 4K@60Hz 4:4:4

●HDMI ports transmit 18Gbps lossless uncompressed video bandwidth

●18Gbps lossless compressed HDBaseT signal transmission

●4K->1080P Down Scaler

●Dolby Vision, HDR10+, HLG are supported

●HDBaseT output can extend video transmission distance up to 328ft / 100 meters via

a single CAT 5e/6/7 cable.

●HDMI audio pass-through up to 7.1CH HD audio (LPCM, Dolby TrueHD and DTS-HD

Master Audio)

●ARC function on local HDMI and HDBaseT output ports

●IR matrix and Audio matrix are supported

●Smart EDID management

●24V POC on all HDBaseT ports

●Control via front panel buttons, IR remote, RS-232, LAN, and Web GUI

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 5

BZBGEAR BG-UM88-100M-KIT PRODUCT MANUAL

Packing List

●1x 8 by 8 HDMI and HDBaseT Matrix

Switch

●8x HDBaseT Receiver

●1x Matrix IR Remote

●1x 100~240V AC 50/60Hz Power cable

●1x RS-232 serial cable (1.5 meters,

male to female head)

●16x 3-pin Phoenix Connector

●9x IR Blaster cable (1.5 meters)

●10x 20~60KHz IR Receiver cable (1.5

meters)

●18x Mounting Ear (Matrix and Receiver)

●1x User Manual

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 6

BZBGEAR BG-UM88-100M-KIT PRODUCT MANUAL

Speciﬁcations

Technical

HDMI Compliance

HDMI 2.0b

HDCP Compliance

HDCP 2.2 and HDCP 1.4

Video Bandwidth

18Gbps

Video Resolution

Up to 4K@50/60Hz (4:4:4)

Color Space

RGB 4:4:4, YCbCr 4:4:4/4:2:2/4:2:0

Color Depth

12-bit (4K), 16-bit (1080P)

HDMI Audio Formats

(Pass-through)

PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High

Res, DTS-HD Master Audio, DSD

Coax Audio Formats

PCM 2.0, Dolby Digital / Plus, DTS

L/R Audio Formats

PCM2.0

HDR formats

4:4:4, 4:2:2, 4:2:0 (10,12bit deep color) HDR10, HDR10+, Dolby Vision, HLG

Infrared

20KHz ~ 60KHz

ESD Protection

Human-body Model:

±8kV (Air-gap discharge) , ±4kV (Contact discharge)

Connection

Matrix

Inputs: 8 x HDMI Type A [19-pin female]

10× IR INPUT [3.5mm Stereo Mini-jack]

2× Stereo Audio [3.5mm Stereo Mini-jack B]

1× S/PDIF (OPTICAL)

1× S/PDIF (Digital COAX)

Outputs: 8 x HDMI Type A [19-pin female]

8 × HDBaseT port [RJ45]

9×IR OUTPUT [3.5mm Stereo Mini-jack]

8× RS-232 [3-pin Phoenix connector]

8× S/PDIF (Digital COAX)

8× Stereo Audio [3.5mm Stereo Mini-jack]

1× LAN [RJ45]

Controls: 1 × TCP/IP [RJ45]

1 × RS-232 [D-Sub 9]

HDBaseT Receiver

Input: 1 x HDBT IN [RJ45, 8-pin female]

1× IR IN [3.5mm Stereo Mini-jack]

Outputs: 1× HDMI OUT [HDMI Type A, 19-pin female]

1× IR OUT [3.5mm Stereo Mini-jack]

Controls: 1× SERVICE [Micro USB, Update port]

1× RS-232 [Phoenix jack]

2× LAN [RJ45]

Mechanical

Housing

Metal Enclosure

Color

Black

Dimensions

TX: 440mm (W)×362mm (D)×88mm (H)

RX: 163mm (W)×90.3mm (D)×18mm (H)

Weight

TX: 6.9 kg, RX: 392g

Power Supply

AC 100 - 240V 50/60Hz

Power Consumption

128W (Max)

Operating Temperature

0°C ~ 40°C / 32°F ~ 104°F

Storage Temperature

-20°C ~ 60°C / -4°F ~ 140°F

Relative Humidity

20~90% RH (non-condensing)

Resolution / Distance

4K60 - Feet / Meters

CAT5e/6/7

328ft / 100M

Resolution / Cable length

4K60 -

Feet / Meters

4K30 -

Feet / Meters

1080P60 -

Feet / Meters

HDMI IN / OUT

16ft / 5M

32ft / 10M

50ft / 15M

The use of “Premium High-Speed HDMI” cable is highly recommended.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 7

BZBGEAR BG-UM88-100M-KIT PRODUCT MANUAL

Operation Controls and Functions

Matrix Panel

Front Panel

NO.

Name

Function Description

OLED screen

Display matrix switching status, input / output port, EDID, Baud rate, and IP Address.

Power LED

The LED will illuminate in green when the product is working normally, and red when the

product is in standby.

OUTPUT / INPUT

buttons

First press an output button (1~8) and then press an input button (1~8) to select the

corresponding input source for the output port.

MENU / ENTER /

UP /DOWN

1. EDID Check: On the initial OLED display screen press the “MENU” button to enter the

Matrix switching menu and then press “UP/DOWN” to check the current EDID information

of each HDMI input port.

2. EDID setting: On the initial OLED display screen, press the “MENU” button to enter the

“Select EDID” interface. Press the “UP/DOWN” buttons to select the required EDID and

press the “ENTER” button to enter the “Copy to Input:” interface. Then, press the

“UP/DOWN” buttons to select the input port you need to set and press the “ENTER”

button again to conﬁrm.

3. Baud rate setting: On the initial OLED display screen, press “MENU” button twice to enter

“SELECT BAUD” interface and press the “UP/DOWN” buttons to select the required Baud

rate. Finally, press the “ENTER” button to conﬁrm the settings.

4. IP Address Check: On the initial OLED display screen press the “MENU” button three

times to enter the IP interface and check the current IP address. Press the “UP/DOWN”

buttons to switch DHCP ON/OFF, and then press the “ENTER” button to conﬁrm the

settings. Pressing the “MENU” button again will return to the initial OLED display.

POWER button

Press and hold the POWER button for 3 seconds to enter the standby mode. Press the

button again to wake up the device.

IR Window

It only receives the IR remote signal from this product.

LOCK button

Short press the LOCK button to lock front panel buttons (Except the power button); Press it

again to unlock.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 8

BZBGEAR BG-UM88-100M-KIT PRODUCT MANUAL

Rear Panel

No.

Name

Function Description

INPUT ports (1-8)

Connect to an HDMI source device such as Bluray player or game console with an HDMI cable.

OUTPUT ports (1-8)

Connect to an HDBaseT Receiver via a CAT cable.

Connect to an HDMI display device such as a TV or monitor with an HDMI cable.

LAN

Connect to a router and the LAN ports of the HDBaseT Receiver can connect an Internet capable

device such as PC or laptop to the network.

AUDIO IN ports

3.5mm Stereo Mini, S/PDIF optical, and digital coaxial audio input ports. Connect to external

audio source devices such as a PC or media player.

RS-232 port (1-8)

Connect to a PC or control system by 3-pin phoenix connector serial cable to transmit

commands between the Matrix and HDBaseT Receiver.

DIGITAL port (1-8)

Connect to an audio output device such as an audio ampliﬁer via a digital coaxial cable (audio is

from the HDBaseT receiver unit).

STEREO port (1-8)

Connect to an ampliﬁer or speaker via a 3.5mm stereo mini audio cable (audio is from the

HDBaseT receiver unit).

IR EXT

If the IR receiver window of the unit is blocked or the unit is installed in a closed area out of

infrared line of sight, the IR receiver cable can be inserted to the “IR EXT” port to receive the IR

remote signal.

IR INPUT ports

Connect to an IR receiver cable, the IR receive signal will emit to the “IR OUT” port of the

corresponding HDBaseT Receiver.

IR OUTPUT ports

Connect to an IR blaster cable, the IR emit signal is from the “IR IN” port of the corresponding

HDBaseT Receiver.

TCP/IP port

This port is the link port for TCP/IP control and to connect an active Ethernet connection for the

base unit itself via RJ45.

RS-232 port

Connect to a PC or control system by D-Sub 9-pin cable to control the Matrix.

GND

Grounding terminal.

POWER input

Connect to 100~240V AC 50/60Hz power cable.

Data Signal

Indicator Lamp

Connection Signal

Indicator Lamp

OUTPUT port

●Solid: HDMI signal with HDCP.

●Flashing: HDMI signal without HDCP.

●Dark: No HDMI signal.

●Solid: Matrix and HDBaseT Receiver are in

good connection status.

●Flashing: Matrix and HDBaseT Receiver

are in poor connection status.

●Dark: Matrix and HDBaseT Receiver are

not connected.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 9

BZBGEAR BG-UM88-100M-KIT PRODUCT MANUAL

HDBaseT Receiver Panel

No.

Name

Function Description

POWER LED

Power LED indicator, LED will illuminate when the device is connected with power

supply.

SERVICE port

Firmware update port

DC 24V

Plug the DC 24V/1A power cord into this port and connect the adapter to an AC wall

outlet.

Note: The Matrix supports POC functionality so the Receiver doesn't need to connect

to a power supply when the HDBaseT IN port is connected to the HDBaseT port of the

Matrix.

HDBaseT IN port

Connect to the HDBaseT output port of the Matrix with CAT cable.

Connection Signal Indicator

Lamp (Green)

■Solid: Matrix and Receiver are in good connection status.

■Flashing: Matrix and Receiver are in poor connection status.

■Dark: Matrix and Receiver are not connected.

Data Signal Indicator Lamp

(Orange)

■Solid: HDMI signal with HDCP.

■Flashing: HDMI signal without HDCP.

■Dark: No HDMI signal.

IR IN

Connect to the IR receiver cable and the IR signal will emit to the corresponding IR OUT

port of the Matrix.

IR OUT

Connect to the IR blaster cable and the IR signal will be received from the

corresponding IR IN port of the Matrix.

HDMI OUT port

Connect to an HDMI display device such as a TV or monitor with an HDMI cable.

RS-232 port

Connect to a PC or control system by 3-pin phoenix connector cable to transmit

commands for the Matrix via the HDBaseT Receiver.

LAN ports

Connect Ethernet cables to these ports to provide a wired Ethernet connection to local

devices such as a PC or gaming console.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 10

Inhaltsverzeichnis

Andere BZB Gear Matrix-Umschalter Handbücher

BZB Gear

BZB Gear BG-UHD-44M Bedienungsanleitung

BZB Gear

BZB Gear BG-UM88-150L-KIT Bedienungsanleitung

BZB Gear

BZB Gear BG-8K-22MA Bedienungsanleitung

BZB Gear

BZB Gear BG-UHD-1616M Bedienungsanleitung

BZB Gear

BZB Gear BZ-UHD-88M-ARC Bedienungsanleitung

BZB Gear

BZB Gear FMS-88H2A Bedienungsanleitung

BZB Gear

BZB Gear BG-UHD-44M Bedienungsanleitung

BZB Gear

BZB Gear BG-UM88-150L-KIT Bedienungsanleitung

BZB Gear

BZB Gear BG-UHD44MA Bedienungsanleitung

BZB Gear

BZB Gear BG-UHD-88M18G Bedienungsanleitung

BZB Gear

BZB Gear BG-UHD-42M Bedienungsanleitung

BZB Gear

BZB Gear BG-8K-42MA Bedienungsanleitung

BZB Gear

BZB Gear HDM-B44H70 Bedienungsanleitung

BZB Gear

BZB Gear BG-UHD-88M Bedienungsanleitung

BZB Gear

BZB Gear BG-UHD-44M Bedienungsanleitung

BZB Gear

BZB Gear BG-UM44-150L-KIT Bedienungsanleitung

BZB Gear

BZB Gear BG-UM88-150L-KIT Bedienungsanleitung

BZB Gear

BZB Gear BG-UM-88ANS Bedienungsanleitung

BZB Gear

BZB Gear BG-UHD-1616M Bedienungsanleitung

BZB Gear

BZB Gear BG-UHD-1616M Bedienungsanleitung

BZB Gear

BZB Gear BG-UM-88ANS Bedienungsanleitung

BZB Gear

BZB Gear BG-UHD-MVS42MA Bedienungsanleitung

BZB Gear

BZB Gear BG-UM44-100M-KIT Bedienungsanleitung

BZB Gear

BZB Gear BG-M88S-H2A-KIT Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte