C4i HDP-MXB88DA Bedienungsanleitung

VER 1.0

18Gbps 8x8 HDMI Matrix

with ARC Function

Thank you for purchasing this product

Surge protection device recommended

Table of Contents

For optimum performance and safety, please read these instructions carefully before connecting,

operating or adjusting this product. Please keep this manual for future reference.

This product contains sensitive electrical components that may be damaged by electrical

spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly

recommended in order to protect and extend the life of your equipment.

1. Introduction.....................................................................................................................

2. Features...........................................................................................................................

3. Package Contents........................................................................................................

4. Specifications................................................................................................................

5. Operation Controls and Functions..............................................................................

6. IR Remote.....................................................................................................................

7. IR Cable Pin Assignment...............................................................................................

8. EDID Management........................................................................................................

9. Web GUI User Guide....................................................................................................

10. RS-232 Control Command...........................................................................................

11. Application Example...................................................................................................

1. Introduction

The 18Gbps 8x8 HDMI Matrix supports the transmission of video (up to 4K2K@60Hz

YUV 4:4:4) and multi-channel high resolution digital audio from 8 HDMI sources to 8 HDMI

displays. Audio de-embedded to analog and coaxial audio is supported from 8 HDMI output

ports. While HDMI output ARC function is enabled, the ARC audio from HDMI display devices

will be extracted to coaxial audio output. Each HDMI output of this 8x8 HDMI Matrix supports

4K2K to 1080P downscaler independently. Control is via front panel buttons, IR remote,

RS-232, LAN and Web GUI.

☆HDMI 2.0b, HDCP 2.2 and HDCP 1.4 compliant

☆Video resolution up to 4K2K@60Hz (YUV 4:4:4) on all HDMI ports

☆Support 18Gbps video bandwidth

☆Dolby Vision, HDR10+ and HLG are supported.

☆ Support 4K->1080P Down Scaler for each output port

☆HDMI audio pass-through up to 7.1CH HD audio (LPCM, Dolby TrueHD and DTS-HD

Master Audio)

☆Audio de-embedded is supported via analog and coax ports

☆ARC, CEC and smart EDID management are supported

☆1U rack mounted design with front panel OLED display

☆Control via front panel buttons, IR remote, RS-232, LAN and Web GUI

2. Features

3. Package Contents

①1 x 18Gbps 8 x 8 HDMI Matrix

②1 x 12V/5A Power Adapter

③1 x IR Remote

④1 x IR Receiver cable (1.5 meters)

⑤1 x RS-232 serial cable (1.5 meters, male to female head)

⑥2 x Mounting Ear

⑦1 x User Manual

- 1 / 20 -

4. Specifications

Technical

HDCP Compliance HDCP 2.2 and HDCP 1.4

Video Bandwidth 18Gbps

Video Resolution Up to 4K2K@50/60Hz (4:4:4)

Color Space RGB, YCbCr 4:4:4/4:2:2/4:2:0

Color Depth 8-bit, 10-bit, 12-bit

HDMI Audio Formats

(Pass-through)

LPCM 2/5.1/7.1, Dolby Digital, DTS 5.1, Dolby Digital+,

Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X

Coax Audio Formats LPCM 2.0, Dolby Digital / Plus, DTS 5.1

L/R Audio Formats PCM2.0

ESD Protection Human-body Model:

±8kV (Air-gap discharge) , ±4kV (Contact discharge)

HDR formats HDR10,HDR10+,Dolby Vision, HLG

Output Ports

8×HDMI Type A [19-pin female]

8×Coax Audio (RCA)

8×L/R Audio [3.5mm Stereo Mini-jack]

Control Ports 1×TCP/IP [RJ45]

1×RS-232 [D-Sub 9]

Mechanical

Housing Metal Enclosure

Color Black

Dimensions TX: 440mm (W)×200mm (D)×44.5mm (H)

Weight TX: 2.8kg

Power Supply Input: AC 100 - 240V 50/60Hz

Output: DC 12V/5A (US/EU standard, CE/FCC/ULcertified)

Power Consumption 43W

-10°C ~ 45°C / 14°F ~ 113°F

-20°C ~ 60°C / -4°F ~ 140°F

Operating Temperature

Storage Temperature

Relative Humidity 20~90% RH (non-condensing)

Connection

Input Ports 8×HDMI Type A [19-pin female]

1×IR EXT [3.5mm Stereo Mini-jack]

4K60 -

Feet / Meters

4K30 -

Feet / Meters

HDMI IN / OUT 32ft / 10M16ft / 5M

The use of “Premium High Speed HDMI” cable is highly recommended.

1080P60 -

Feet / Meters

50ft / 15M

Resolution / Cable length

- 2 / 20 -

HDMI Compliance HDMI 2.0b

5. Operation Controls and Functions

Front Panel

NO. Name Function Description

1 OLED screen

Display matrix switching status, input / output port, EDID,

Baud rate, IP Address.

3Input / Output

buttons

You need to press an output button (1~8) firstly and then

press an input button (1~8) to select the corresponding

input source for the output port.

4MENU / ENTER

/ UP /DOWN

①EDID Check:On the initial OLED display screen, press

“MENU” button to enter the Matrix switching state interface,

then press “UP/DOWN” button to check the current EDID

information of each HDMI input port.

②EDID setting: On the initial OLED display screen, press

“MENU” button to enter the EDID setting interface, press

“UP/DOWN” button to select the required EDID, and press

the “ENTER” button. A prompt “copy to input :” will appear.

Then press “UP/DOWN” button to select the input port you

need to set, and press “ENTER” button again to confirm.

③Baud rate setting: On the initial OLED display screen,

press “MENU” button to enter the Baud rate interface, and

press “UP/DOWN” button to select the required Baud rate,

finally press the “ENTER” button to confirm the setting.

④IP Address Check: On the initial OLED display screen,

press “MENU” button to enter the IP interface, then press

“UP/DOWN” button to check the current IP address.

Pressing the “MENU” button again will return to the initial

OLED display status.

- 3 / 20 -

2 5

Power LED The LED will illuminate in green when the product is connected

to power supply, and red when the product is on standby.

5 POWER button

Long press the POWER button for 3 seconds to enter the

standby mode, then short press it to wake up the device.

LOCK button Short press the LOCK button to lock front panel buttons

(Except the power button); Press it again to unlock.

IR Window IR receiver window, it only receives the IR remote signal

from this product.

1 2 3 4 5 6 7 8

INPUT

OUTPUT

ENTER

18Gbps 8x8

HDMI Matrix

POWER

LOCK

DOWN

Rear Panel

78 9

123456

- 4 / 20 -

CONTROL

TCP/IP

DC 12V

RS-232

IR EXT

OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 IN 8

L/R

OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8

COAX

OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8

No. Name Function Description

INPUT ports

(1-8)

HDMI input ports , connect to HDMI source device such as

DVD or set-top box with an HDMI cable.

OUTPUT ports

(1-8)

HDMI output ports, connect to HDMI display device such as

TV or monitor with an HDMI cable.

Analog audio output port, connect to an amplifier or speaker

via a 3.5mm audio cable.

Coaxial audio output port, connect to audio output device

such as audio amplifier via a coaxial cable.

TCP/IP control port, connect to PC or router with an RJ45

cable.

Connect to a PC or control system by D-Sub 9-pin cable to

transmit RS-232 command.

GND Connect the housing to the ground.

DC 12V Connect to 12V/5A power adapter.

IR EXT

L/R OUT(1-8)

COAX OUT

(1-8)

TCP/IP port

RS-232 port

If the IR receiver window of the unit is blocked or the unit is

installed in a closed area out of infrared line of sight, the IR

receiver cable can be inserted to the “IR EXT” port to

receive the IR remote signal.

- 5 / 20 -

HDMI Matrix Remote

1 2 3 4

1 2 34

All

Output

Input

6. IR Remote

①Power on or Standby: Power on the Matrix or set it to

standby mode.

②Input 1/2/3/4/5/6/7/8: Select input source button.

: Select the last or next input source button.

③Output 1/2/3/4/5/6/7/8 button: Select output source

button.

All: Select all output source simultaneously. For example,

when you press the “All” button and then press input “1”

button, at this time the input “1” source will output to all display

devices.

Operation instruction: You need to press the output button

firstly and then press input button to select the corresponding

input source. For example,

Press Output-X

(X means output button from 1 to 8 , including “All” button)

Then press Input-Y

(Y means input button from 1 to 8 )

The Matrix can be selected input and output source by using the IR remote. There are

two ways to receive the IR remote signal.

The first way: The IR window accepts the IR remote signal. When using the IR remote, the

furthest distance is 7 meters and the angle is ± 45°. The diagram is shown as below:

IR remote of the Matrix

1 2 3 4

5 6 7 8

1 2 3 4

8765

All

HDMI Matrix Remote

Input

Output

1 2 3 4 5 6 7 8

INPUT

OUTPUT

ENTER

18Gbps 8x8

HDMI Matrix

POWER

LOCK

DOWN

7. IR Cable Pin Assignment

IR RECEIVER

- 6 / 20 -

The second way: If the IR receiver window of the Matrix is blocked or the Matrix is installed

in a closed area out of infrared line of sight, the IR receiver cable can be inserted to the “IR

EXT” port to receive the IR remote signal. The furthest distance of using the IR remote is 7

meters and the IR remote is directly faced to the IR receiver head. The diagram is shown as

below.

1 2 3 4

5 6 7 8

1 2 3 4

8765

All

HDMI Matrix Remote

Input

Output

IR remote of the Matrix

Machine Cabinet

CONTROL

TCP/IP

DC 12V

RS-232

IR EXT

OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 IN 8

L/R

OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8

COAX

OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8

- 7 / 20 -

8. EDID Management

This Matrix has 21 factory defined EDID settings, 2 user-defined EDID modes and 8 copy EDID

modes. You can select defined EDID mode or copy EDID mode to input port through front panel

buttons, RS-232 control or Web GUI.

On-panel button operation: On the initial OLED display screen, press “MENU” button to enter

the EDID setting interface, press “UP/DOWN” button to select the required EDID, and press

the “ENTER” button. A prompt “copy to input :” will appear. Then press “UP/DOWN” button to

select the input port you need to set, and press “ENTER” button again to confirm this operation.

ASCII control operation: Connect the Matrix to PC with a serial cable, then open a Serial

Command tool on PC to send ASCII command “s edid in x from z!” to set EDID. For details,

please refer to “EDID Setting” in the ASCII command list of “10. RS-232 Control Command”.

Web GUI Operation: Please check the EDID management in the “Input page” of “9. Web

GUI User Guide”.

- 8 / 20 -

The defined EDID setting list of the product is shown as below:

EDID Mode EDID Description

1 1080p, Stereo Audio 2.0

1080p, Dolby/DTS 5.1

1080p, HD Audio 7.1

1080i, Stereo Audio 2.0

1080i, HD Audio 7.1

1080i, Dolby/DTS 5.1

3D, Stereo Audio 2.0

3D, Dolby/DTS 5.1

3D, HD Audio 7.1

4K2K30_444, Stereo Audio 2.0

4K2K30_444, Dolby/DTS 5.1

4K2K30_444, HD Audio 7.1

4K2K60_420, Stereo Audio 2.0

4K2K60_420, Dolby/DTS 5.1

4K2K60_420, HD Audio 7.1

4K2K60_444, Stereo Audio 2.0

4K2K60_444, Dolby/DTS 5.1

4K2K60_444, HD Audio 7.1

USER1

USER2

Copy from hdmi output 1

Copy from hdmi output 2

19 4K2K60_444, Stereo Audio 2.0 HDR

4K2K60_444, Dolby/DTS 5.1 HDR

4K2K60_444, HD Audio 7.1HDR

Copy from hdmi output 5

Copy from hdmi output 6

Copy from hdmi output 7

Copy from hdmi output 8

Copy from hdmi output 3

Copy from hdmi output 4

Inhaltsverzeichnis

Andere C4i Matrix-Umschalter Handbücher

C4i

C4i HDM-962 Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte