CableCreation CD0673 Bedienungsanleitung
USB3.0 to 2.5G Ethernet Adapter
User Manual
USB3.0 to 2.5G Ethernet Adapter
Contents
1.0 INTRODUCTION.................................................................. 错误！未定义书签。
2.0 FEATURES..............................................................................错误！未定义书签。
3.0 SPECIFICATIONS................................................................ 错误！未定义书签。
4.0 PACKAGE CONTENTS........................................................ 错误！未定义书签。
5.0 OPERATION...........................................................................错误！未定义书签。
6.0 CONNECTION DIAGRAM.................................................. 错误！未定义书签。
7.0 DRIVER INSTALLATION.................................................................................3
USB3.0 to 2.5G Ethernet Adapter
1
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or using this product. Please keep this manual for future
reference.
1.0 INTRODUCTION
This USB3.0 to 2.5Gbps Ethernet Adapter is a high performance and
low expenditure solution. It enables a Fast Ethernet network
connection capability for desktops, notebook PC’s with standard USB
port. It resolves the trouble of the computer without Ethernet port
that you can also connect computer to Ethernet through USB 3.0 port
easily.
2.0 FEATURES
Supports USB3.0 input and 2.5Gbps RJ45 output
Supports 10M/100M/1G/2.5G bandwidth
Supports twisted pair crossover detection and auto-correction
USB bus power (no external power supply)
Supports USB 3.0, 2.0 and 1.1
Support WOL(Wake-On-LAN), Full Duplex
flow(10M/100M/1G/2.5G Rate), Auto-Negotiation
Supports Operating system for computers:
Windows: Windows 7 / Windows 8 / 8.1 /Windows10/ Windows
Vista/ Windows XP (32/64bit)
Mac: Mac OS X 10.6 to 10.15
3.0 SPECIFICATIONS
Input/Output Connector
Input
USB3.0 Male ×1
Output
RJ45 ×1
RJ45 Basic Specifications
Supported communication rate
10Mbps/100Mbps/1Gbps/2.5Gbps
Main features supported
WOL(Wake-On-LAN)
Full Duplex flow(10M/100M/1G/2.5G
Rate)
Auto-Negotiation
Warranty
Limited Warranty
2 Year
Environmental
Operating Temperature
0℃to +45℃
Operating Humidity
10% to 85 % RH (no condensation)
Storage Temperature
-10℃to +70℃
USB3.0 to 2.5G Ethernet Adapter
2
Storage Humidity
5% to 90 % RH (no condensation)
Power Consumption
Voltage
4.75V～5.25V
Standby Power
<60mA (When Ethernet cable is not
connected)
Normal Operating Power
<80mA 10Mbps
<130mA 100Mbps
<300mA 1Gbps
<460mA 2.5Gbps
Regulatory Approvals
Certifications
FCC,CE
Accessories
User Manual
English Version
4.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
Main unit x1
5.0 OPERATION
①Connect Computer to USB 3.0 port of this product.
②Connect RJ45 port of this product to Ethernet Router with an
Ethernet cable
③Automatically or manually set IP address of computer
USB3.0 to 2.5G Ethernet Adapter
3
6.0 CONNECTION DIAGRAM
7.0 DRIVER INSTALLATION
1.Please download from Realtek official website:
https://www.realtek.com/en/component/zoo/category/network-interface-controllers-10-100-10
00m-gigabit-ethernet-usb-3-0-software
Or from CableCreation official website
https://www.cablecreation.com/download/?ss=cd0026&stype=download
2, When you installed the drivers, please use your “Administrator
permission (Run as Administrator)to install it. If you were using
macOS, please use your “Admin”account to install the drivers.(You
probably need to go to left-upper Apple iconSystem
PreferencesGeneral & Privacy, and allow apps downloaded from APP
store and identified developers)
3, Restart your laptop or Mac.
4, For Windows: After you installed the driver, if you can see the
Ethernet icon on the bottom of your system tray, this should consider
as the adapter’s function is good.
USB3.0 to 2.5G Ethernet Adapter
4
For macOS:
You can go to left-upper Apple iconSystem PreferencesNetwork,
check if you can see USB 10/100/1000/2500 LAN with green color
icon. If you can see that icon, that indicating the adapter is good.
5. If you also could not surf the Internet, you probably need to
contact with your Network Carrier or router supplier for more supports.
You probably need to set the correct DHCP server, or set the correct IP
address, Subnet Mask, router, DNS server.
6. After you have installed the drivers correctly, however you could
not even see the Ethernet icon, the item probably was defective, your
PC or Mac’s USB ports probably have some problems, you can swap
another PC or other USB ports to have a try.
Inhaltsverzeichnis
Andere CableCreation Adapter Handbücher
