Cabletron Systems 6E122-26 Bedienungsanleitung

9032076-05

6E122-26, 6E132-25, 6E123-26 and 6E133-25

SmartSwitch 6000 Interface Modules

User’s Guide

1413

COM

CPU

910

11 12

15 16

17 18

19 20

21 22

23 24

6E123-26

Ethernet

1413

COM

CPU

910

11 12

15 16

17 18

19 20

21 22

23 24

6E133-25

Ethernet

1413

COM

CPU

910

11 12

15 16

17 18

19 20

21 22

23 24

6E132-25

Ethernet

1413

COM

CPU

910

11 12

15 16

17 18

19 20

21 22

23 24

6E122-26

Ethernet

9032076-05

6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide i

NOTICE

Cabletron Systems reserves the right to make changes in speciﬁcations and other information

contained in this document without prior notice. The reader should in all cases consult Cabletron

Systems to determine whether any such changes have been made.

The hardware, ﬁrmware, or software described in this manual is subject to change without notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FORANY INCIDENTAL,

INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT

NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS MANUAL OR

THE INFORMATION CONTAINED IN IT, EVEN IF CABLETRON SYSTEMS HAS BEEN

ADVISED OF, KNOWN, OR SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH

DAMAGES.



1998 by Cabletron Systems, Inc., P.O. Box 5005, Rochester, NH 03866-5005

Printed in the United States of America

Order Number: 9032076-05 August 1998

Cabletron Systems

is a registered trademark and

SmartSwitch

is a trademark of Cabletron Systems,

Inc.

All other product names mentioned in this manual may be trademarks or registered trademarks of

their respective companies.

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment uses, generates, and can radiate radio frequency energy and if not installed in

accordance with the operator’s manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause interference in which case the user

will be required to correct the interference at his own expense.

WARNING:

Changes or modiﬁcations made to this device which are not expressly approved by the

party responsible for compliance could void the user’s authority to operate the equipment.

Printed on Recycled Paper

Notice

ii 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide

INDUSTRY CANADA NOTICE

This digital apparatus does not exceed the ClassA limits for radio noise emissions from digital

apparatus set out in the Radio Interference Regulations of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables

aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique

édicté par le ministère des Communications du Canada.

VCCI NOTICE

This is a Class A product based on the standard of the Voluntary Control Council for Interference by

Information Technology Equipment (VCCI). If this equipment is used in a domestic environment,

radio disturbance may arise. When such trouble occurs, the user may be required to take corrective

actions.

CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT

IMPORTANT:

Before utilizing this product, carefully read this License Agreement.

This document is an agreement between you, the end user, and Cabletron Systems, Inc. (“Cabletron”)

that sets forth your rights and obligations with respect to the Cabletron software program (the

“Program”) contained in this package. The Program may be contained in ﬁrmware, chips or other

media. BY UTILIZING THE ENCLOSED PRODUCT,YOUARE AGREEING TO BECOME

BOUND BY THE TERMS OF THIS AGREEMENT, WHICH INCLUDES THE LICENSE AND

THE LIMITATION OF WARRANTY AND DISCLAIMER OF LIABILITY. IFYOU DO NOT

AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN THE UNUSED

PRODUCT TO THE PLACE OF PURCHASE FORA FULL REFUND.

Notice

6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide iii

CABLETRON SOFTWARE PROGRAM LICENSE

1. LICENSE. You have the right to use only the one (1) copy of the Program provided in this

package subject to the terms and conditions of this License Agreement.

You may not copy, reproduce or transmit any part of the Program except as permitted by the

2. OTHER RESTRICTIONS. You may not reverse engineer, decompile, or disassemble the

Program.

3. APPLICABLE LAW. This License Agreement shall be interpreted and governed under the laws

and in the state and federal courts of New Hampshire. You accept the personal jurisdiction and

venue of the New Hampshire courts.

EXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITY

1. EXCLUSION OF WARRANTY. Except as may be specifically provided by Cabletron in

writing, Cabletron makes no warranty, expressed or implied, concerning the Program (including

its documentation and media).

CABLETRON DISCLAIMSALL WARRANTIES, OTHER THAN THOSE SUPPLIED TO

YOU BY CABLETRON IN WRITING, EITHER EXPRESSED OR IMPLIED, INCLUDING

BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE PROGRAM, THE

ACCOMPANYING WRITTEN MATERIALS, AND ANY ACCOMPANYING HARDWARE.

2. NO LIABILITY FOR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL

CABLETRON OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER

(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS,

PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, SPECIAL,

INCIDENTAL, CONSEQUENTIAL, OR RELIANCE DAMAGES, OR OTHER LOSS)

ARISING OUT OF THE USE OR INABILITY TO USE THIS CABLETRON PRODUCT,

EVEN IF CABLETRON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR

LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, OR

ON THE DURATION OR LIMITATION OF IMPLIED WARRANTIES, IN SOME

INSTANCES THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO

YOU.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

The enclosed product (a) was developed solely at private expense; (b) contains “restricted computer

software” submitted with restricted rights in accordance with Section 52227-19 (a) through (d) of the

Commercial Computer Software - Restricted Rights Clause and its successors, and (c) in all respects

is proprietary data belonging to Cabletron and/or its suppliers.

For Department of Defense units, the product is licensed with “Restricted Rights” as deﬁned in the

DoD Supplement to the Federal Acquisition Regulations, Section 52.227-7013 (c) (1) (ii) and its

successors, and use, duplication, disclosure by the Government is subject to restrictions as set forth in

subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at

252.227-7013. Cabletron Systems, Inc., 35 Industrial Way, Rochester, New Hampshire 03867-0505.

Notice

iv 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide

DECLARATION OF CONFORMITY

Application of Council Directive(s):

89/336/EEC

73/23/EEC

Manufacturer’s Name:

Cabletron Systems, Inc.

Manufacturer’s Address:

35 Industrial Way

PO Box 5005

Rochester, NH 03867

European Representative Name:

Mr. J. Solari

European Representative Address:

Cabletron Systems Limited

Nexus House, Newbury Business Park

London Road, Newbury

Berkshire RG13 2PZ, England

Conformance to Directive(s)/Product Standards:

EC Directive 89/336/EEC

EC Directive 73/23/EEC

EN 55022

EN 50082-1

EN 60950

Equipment Type/Environment:

Networking Equipment, for use in a

Commercial or Light

Industrial

Environment.

We the undersigned, hereby declare, under our sole responsibility, that the equipment packaged

with this notice conforms to the above directives.

Manufacturer Legal Representative in Europe

Mr. Ronald Fotino Mr. J. Solari

___________________________________ ___________________________________

Full Name Full Name

Principal Compliance Engineer Managing Director - E.M.E.A.

___________________________________ ___________________________________

Title Title

Rochester, NH, USA Newbury, Berkshire, England

___________________________________ ___________________________________

Location Location

6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide v

CONTENTS

CHAPTER 1 INTRODUCTION

1.1 Using This Guide.........................................................................1-1

1.2 Structure of This Guide................................................................1-1

1.3 6E12X-26 and 6E13X-25 Overview.............................................1-2

1.3.1 Connectivity ....................................................................1-4

1.3.2 Full Duplex Switched Ethernet........................................1-4

1.3.3 SmartTrunk .....................................................................1-5

1.3.4 Management...................................................................1-5

1.3.5 Switching Options...........................................................1-5

1.3.6 Standards Compatibility..................................................1-6

1.3.7 LANVIEW Diagnostic LEDs............................................1-6

1.3.8 Year 2000 Compliant......................................................1-6

1.3.9 Runtime IP Address Discovery.......................................1-6

1.3.10 Local Management Features..........................................1-7

1.4 Optional Features........................................................................1-8

1.5 Document Conventions...............................................................1-9

1.6 Getting Help...............................................................................1-10

1.7 Related Manuals........................................................................1-11

CHAPTER 2 NETWORK REQUIREMENTS

2.1 SmartTrunk..................................................................................2-1

2.2 10BASE-T Network .....................................................................2-2

2.3 100BASE-TX Network.................................................................2-2

2.4 100BASE-FX Fiber Optic Network ..............................................2-2

CHAPTER 3 INSTALLATION

3.1 Required Tools............................................................................3-1

3.2 Unpacking the 6E12X-26 and 6E13X-25.....................................3-1

3.3 6E12X-26 and 6E13X-25 Options...............................................3-2

3.4 Installing the 6E12X-26 and 6E13X-25 Into the

6C105 Chassis............................................................................3-2

Contents

vi 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide

3.5 Connecting to the Network...........................................................3-5

3.5.1 Connecting UTP Cables to Ports 1 Through 24 of the

6E122-26 and 6E132-25.................................................3-6

3.5.2 Connecting UTP Cables to Ports 1 Through 24 of the

6E133-25 and 6E123-26.................................................3-8

3.5.3 Connecting a Twisted Pair Segment

to the FE-100TX............................................................3-10

3.5.4 Connecting a Fiber Optic Segment to the

FE-100FX and FE-100F3..............................................3-12

3.6 Completing the Installation.........................................................3-14

CHAPTER 4 TROUBLESHOOTING

4.1 Using LANVIEW...........................................................................4-1

4.2 FE-100TX LED.............................................................................4-4

4.3 Troubleshooting Checklist............................................................4-6

4.4 Using the RESET Button .............................................................4-7

CHAPTER 5 LOCAL MANAGEMENT

5.1 Overview......................................................................................5-1

5.2 Local Management Keyboard Conventions.................................5-2

5.3 Management Terminal Setup.......................................................5-3

5.3.1 Console Cable Connection..............................................5-3

5.3.2 Connecting an Uninterruptible Power Supply (UPS).......5-4

5.3.3 Management Terminal Setup Parameters ......................5-5

5.3.4 Telnet Connections .........................................................5-6

5.4 Accessing Local Management.....................................................5-7

5.4.1 Navigating Local Management Screens..........................5-8

5.4.2 Selecting Local Management Menu Screen Items........5-10

5.4.3 Exiting Local Management Screens..............................5-10

5.5 The Main Menu Screen..............................................................5-12

5.6 Chassis Menu Screen................................................................5-13

5.7 Chassis Configuration Screen ...................................................5-15

5.7.1 Setting the IP Address...................................................5-17

5.7.2 Setting the Subnet Mask...............................................5-18

5.7.3 Setting the Chassis Date...............................................5-19

5.7.4 Setting the Chassis Time ..............................................5-19

5.7.5 Entering a New Screen Refresh Time...........................5-20

5.7.6 Setting the Screen Lockout Time..................................5-21

5.7.7 Setting the Operational Mode........................................5-22

5.8 SNMP Community Names Screen.............................................5-24

5.8.1 Establishing Community Names ...................................5-25

5.9 SNMP Traps Screen..................................................................5-27

5.9.1 Configuring the Trap Table............................................5-28

Contents

6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide vii

5.10 Chassis Environmental Screen .................................................5-29

5.11 Port Redirect Function Screen ..................................................5-30

5.11.1 Displaying the Source and Destination Entries.............5-32

5.11.2 Changing Source and Destination Ports.......................5-33

5.12 Module Selection Screen...........................................................5-34

5.12.1 Selecting a Module .......................................................5-35

5.13 Module Menu Screen ................................................................5-36

5.14 Module Configuration Menu Screen..........................................5-38

5.15 General Configuration Screen...................................................5-41

5.15.1 Setting the IP Address..................................................5-45

5.15.2 Setting the Subnet Mask...............................................5-46

5.15.3 Setting the Default Gateway.........................................5-47

5.15.4 Setting the TFTP Gateway IP Address.........................5-48

5.15.5 Setting the Module Date ...............................................5-48

5.15.6 Setting the Module Time...............................................5-49

5.15.7 Entering a New Screen Refresh Time ..........................5-50

5.15.8 Setting the Screen Lockout Time..................................5-50

5.15.9 Setting the Operational Mode.......................................5-51

5.15.10Setting the Management Mode.....................................5-52

5.15.11Configuring the COM Port ............................................5-53

5.15.12Changing the Com Port Application..............................5-55

5.15.13Clearing NVRAM ..........................................................5-56

5.15.14Enabling/Disabling IP Fragmentation ...........................5-57

5.16 SNMP Community Names Screen............................................5-57

5.16.1 Establishing Community Names...................................5-59

5.17 SNMP Traps Screen..................................................................5-60

5.17.1 Configuring the Trap Table...........................................5-61

5.18 Switch Configuration Screen.....................................................5-62

5.18.1 Setting the STA.............................................................5-64

5.18.2 Setting the Age Time ....................................................5-65

5.18.3 Setting (Enabling or Disabling) the Port Status ............5-65

5.19 Ethernet Full Duplex Configuration Screen...............................5-66

5.19.1 Setting the Operation Mode..........................................5-68

5.20 Module Specific Configuration Menu Screen ............................5-69

5.21 System Resources Screen........................................................5-72

5.21.1 Setting the Reset Peak Utilization ................................5-73

Contents

viii 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide

5.22 High Speed Interface Configuration Menu Screen

(6E12X-26 Only) ........................................................................5-74

5.22.1 Configuring an FE-100FX or FE-100F3

in Port 25 or 26..............................................................5-77

5.22.2 Setting the FE-100FX and FE-100F3

Operational Mode..........................................................5-77

5.22.3 Configuring an FE-100TX in Port 25 or 26....................5-78

5.22.4 Setting the FE-100TX Operational Mode......................5-78

5.22.5 Setting the FE-100TX Advertised Ability.......................5-78

5.23 Flash Download Screen.............................................................5-79

5.23.1 Image File Download Using TFTP ................................5-82

5.23.2 Image File Download Using RUNTIME.........................5-83

5.23.3 Image File Download Using BootP................................5-84

5.24 Port Redirect Function Screen...................................................5-85

5.24.1 Displaying the Source and Destination Entries.............5-87

5.24.2 Changing Source and Destination Ports.......................5-87

5.25 Broadcast Suppression Screen .................................................5-89

5.25.1 Setting the Threshold....................................................5-90

5.25.2 Setting the Reset Peak Switch......................................5-91

5.26 Module Statistics Menu Screen .................................................5-91

5.27 Switch Statistics Screen.............................................................5-93

5.27.1 Using the Clear Counters Command ............................5-94

5.28 The Interface Statistics Screen..................................................5-95

5.28.1 Displaying Interface Statistics .......................................5-98

5.28.2 Using the Clear Counters Command ............................5-99

5.29 RMON Statistics Screen ............................................................5-99

5.29.1 Displaying RMON Statistics ........................................5-103

5.29.2 Using the Clear Counters Command ..........................5-103

5.30 Network Tools..........................................................................5-104

5.30.1 Built-in Commands......................................................5-105

5.30.2 Special Commands.....................................................5-115

APPENDIX A SPECIFICATIONS

A.1 Device Specifications..................................................................A-1

A.2 Physical Properties ..................................................................... A-1

A.3 Environmental Requirements...................................................... A-1

A.4 Input/Output Ports.......................................................................A-2

A.5 COM Port Pinout Assignments ................................................... A-3

A.6 Regulatory Compliance............................................................... A-3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cabletron Systems Netzwerk-Hardware Handbücher

Cabletron Systems

Cabletron Systems SPECTRUM FRX6000 Betriebsanleitung

Cabletron Systems

Cabletron Systems Netlink FRX4000 Betriebsanleitung

Cabletron Systems

Cabletron Systems Environmental Module TM 9C300-1 Bedienungsanleitung

Cabletron Systems

Cabletron Systems WPIM-S/T Bedienungsanleitung

Cabletron Systems

Cabletron Systems CyberSWITCH HSIM-W6 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SPECTRUM TRMMIM Bedienungsanleitung

Cabletron Systems

Cabletron Systems FE-100 Bedienungsanleitung

Cabletron Systems

Cabletron Systems Netlink FRX4000 Bedienungsanleitung

Cabletron Systems

Cabletron Systems CRBRIM-W/E Bedienungsanleitung

Cabletron Systems

Cabletron Systems TRXMIM-24A Bedienungsanleitung

Cabletron Systems

Cabletron Systems TPMIM-22 Bedienungsanleitung

Cabletron Systems

Cabletron Systems MMAC-Plus 9A128-01 Bedienungsanleitung

Cabletron Systems

Cabletron Systems ATX Handbuch

Cabletron Systems

Cabletron Systems Expansion module 9T122-08 Kurzanleitung

Cabletron Systems

Cabletron Systems CBUPRI/E1 Bedienungsanleitung

Cabletron Systems

Cabletron Systems TRBMIM-T Bedienungsanleitung

Cabletron Systems

Cabletron Systems 9C300-1 Kurzanleitung

Cabletron Systems

Cabletron Systems FLIU-1 Bedienungsanleitung

Cabletron Systems

Cabletron Systems 6C105 Bedienungs- und Wartungshandbuch

Cabletron Systems

Cabletron Systems WPIM-RT1 Bedienungsanleitung

Cabletron Systems

Cabletron Systems Expansion module 9H532-17 Bedienungsanleitung

Cabletron Systems

Cabletron Systems Netlink FRX4000 Montageanleitung

Cabletron Systems

Cabletron Systems 3F00-01 Bedienungsanleitung

Cabletron Systems

Cabletron Systems MMAC-Plus 9E423-24 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung