CAM62 CA101 Bedienungsanleitung
監錄易(監控錄影設備專門店) http://www.cam62.com User manual
http://www.CAM62.com
CA101 / CA111 / VI8908 / VI8908W
IP Wireless / Wired Camera
REMOTE PAN / TILT ROTATE
User Manual
CA101 CA111 VI8908 VI8908W
1 WELCOME
This model IP Camera is an integrated wireless IP Camera solution. It combines a high quality
digital Video Camera with network connectivity and a powerful web server to bring clear to
your Desktop from anywhere on your local network or over the Internet.
The basic function of it is transmitting remote video on IP network. The high
Quality video image can be transmitted with 30fps speed on the LAN/WAN by using
MJPEG hardware compression technology.
This is based on the TCP/IP standard. There is a WEB server inside which could Support
Internet Explore. Therefore the management and maintenance of your device become more
simply by using network to achieve the remote configuration, start-up and upgrade firmware.
You can use this IP CAMERA to monitor some special places such as your home and your
office. Also controlling and managing images are simple by clicking the website through The
network.
NOTE: you can use the IP Camera Step by Step .
監錄易(監控錄影設備專門店) http://www.cam62.com User manual
Features
Powerful high-speed video protocol processor
High-sensitivity 1/4 CMOS sensor
Picture Total 300k Pixels
Video Frame Rate:30fps(QVGA), 30fps(VGA)
Resolution:640 x 480(VGA), 320 x 240(QVGA)
Light Frequency:50Hz, 60Hz or Outdoor
Optimized MJPEG video compression for transmission
Multi-level users management and passwords definition
Embedded Web Server for users to visit by IE
Support wireless network (WiFi/802.11/b/g)mobile
Supporting Dynamic IP(DDNS)and UPNP LAN and Internet(ADSL, Cable Modem)
Giving alarm in cause of motion detection
Supporting image snapshot
Support multiple network protocols：HTTP，TCP/IP，UDP，STMP，DDNS，SNTP，
DHCP，FTP
Support remote system update
Advanced Features
Multi-Protocol support and Transportation
IP CAMERA supports Multi-Protocol such as TCP/IP, SMTP and HTTP. Sending the image
to your mailbox automatically when the IP CAMERA is triggered.
Video Image PTZ function
Users can control the camera direction on the video image.
Motion Detection
Your may use the internal Motion Detection function or external sensor to trigger
images Recording and transportation. Alarm sensor input/output.
The detection sensor sends an alarm and records by itself when there is a fire or
accident. A message as an email is sending to you by this sensor,(The input/output
discreteness can be chosen)
DDNS support
Using it in the condition which includingADSL and IP change often is more convenient,
because IP CAMERA provides dynamic DNS function.
Advanced User Management
Only allowing authorized users access to real-time images of IP Camera.
監錄易(監控錄影設備專門店) http://www.cam62.com User manual
1.2 Packing List
Untie the packing and checking the items contained against the following list;
Wireless IP Camera 1
Wi-Fi Antenna 1
DC Power Supply 1
Network Cable 1
Mounting bracket 1
NOTE: Contact us immediately in the case of any damaged or short of
contents.
1.3 Product views
1 Infrared LED
2 LENS CMOS sensor with fixed focus lens.
3 Network Indicator LED
4 Mic
5 Antenna
6 LAN: RJ-45/10-100 Base T
7 DC5V: Power supply
RESET BUTTON:press and hold down the RESET BUTTON for 5
Seconds .Release the power button and IP Camera will be reset back to the factory
default Parameter.
監錄易(監控錄影設備專門店) http://www.cam62.com User manual
1.4 PC System Requirements
System configuration requirements :( Example for view four IP Camera)
CPU: 2.06GHZ or above Memory: 256M or above
Network Card: 10M or above Display Card:64M or above memory
Recommendable Operating system: Window2000 or Window XP or Vista
1.5 Hardware Instruction
Follow the steps below to set up your camera hardware. Make sure to follow each
step carefully to ensure that the camera operates properly
1) Plug the network cable into the camera and then into your Cable/DSL router.
2) Plug the power adapter into the camera and then into the power outlet.
監錄易(監控錄影設備專門店) http://www.cam62.com User manual
1 SOFTWARE OPERATION SETTING
2.1 IP Camera DevFind Tool
Software Download Site : http://www.cam62.com/article.php?id=73
When the Device has been mounted properly, you can double click the Icon “IP Camera
DevFind Tool” and a dialog box as will pop up.
Note: The software searches IP Servers automatically over LAN.
There are 3 cases:
1. No IP Cameras found within LAN.After about 1 minute search, the Result Field will
show “not found IP Server” and the program shut automatically.
2. IP Cameras have been installed within LAN. All the IP Cameras will be listed and the
total number is displayed in the result field as shown in
監錄易(監控錄影設備專門店) http://www.cam62.com User manual
3. The IP Cameras installed within LAN do not share the same subnet with the monitoring
PC. A prompt as shown in result field (prompt: Subnet doesn’t match, double click to
change!).
Click the left mouse button to choose the prompt and click the right mouse, choose
Network Configuration to set the IP address of the Camera to the same subnet as LAN.
zBasic Properties
There are some device information in the Basic Properties, such as Device
ID,System Firmware Version, Web UI Version.
zNetwork Configuration
In this page, you can configure the Network parameter.
IP : Fill in the IP address assigned and make sure it is in the same subnet as the
gateway (i.e. the first three sections are the same)
Sub Mask: The default subnet mask of the equipment is: 255.255.255.0
Gateway: Make sure it is in the same subnet with PC IP address .Default
Gateway address is 192.168.1.1
DNS: IP address of IPS network provider.
HTTP Port: LAN port assigned for the equipment, usually 100
User & Password: Default administrator Username:admin No Password
Enable Using DHCP the system will assign a reasonable IP address for your
equipment. Only if your gateway supports DHCP (It is the case with most
gateways).
NOTE: When the prompt “subnet doesn’t match, double click to change!” please
set the IP Camera IP address once again.
監錄易(監控錄影設備專門店) http://www.cam62.com User manual
2.2 Camera Login
You can access the camera through IP Camera Tool or IE directly.
1) Double click the IP address of the IP Camera listed.
2) To access the camera ,start your web browser and type in the camera’s IP
address
Such as http://192.168.1.100:100
3) The Camera Login page pop-up.
Enter your account and password on the login page as shown in By default,
Administrator’s Username:admin No Password Click “Sign in” to enter the monitoring
page. You can set the username and password as Administrator, Operator or Visitor.
監錄易(監控錄影設備專門店) http://www.cam62.com User manual
2.3 For Visitor
The status of 9 routes, as shown below.
For example: if is bright, the first route is on Detection (Motion Detection).
If you want to detect 4 views, need to click this icon
If you want to detect 9 views, need to click this icon
Î
OSD: Display date and time on the video .You can disable the OSD function or choice
Other color, (OSD: on-screen display)
Reversal: To see the reversal image
Mirror: To see the mirror image.
Add time stamp on record: Increase the video time stamp
PLAY: Click icon into play mode, is stop.
Snapshot: Click icon to snap the picture.
監錄易(監控錄影設備專門店) http://www.cam62.com User manual
AUDIO: Click icon Camera MIC open, Local Voice input
TALK: Click icon Camera Speaker open, Remote Voice Output
RECORD: Click icon into REC mode, is stop.
2.4 For operator
When login as operator administrator, you can enter the IP Camera For Operator
Vertical patrol
Horizontal patrol
Stop patrol
IO output Switch on/off. (See 2.5.5 for more informations)
監錄易(監控錄影設備專門店) http://www.cam62.com User manual
Resolution: VGA (640*480) / QVGA (320*240)
Work mode: 50Hz/60Hz/Outdoor
Color parameter: Click or can adjust the brightness and contrast
Image PTZ function: Image PTZ function is recommended, you can control the camera
Direction on the video image. Double click the right mouse on the image to enable PTZ
and you can see a white arrow on the video image, click left mouse to control
direction. If want to cancel, double click right mouse again.
2.5 For Administrator
When you login as administrator, “For Administrator” is enabled.
Multi-Device Settings
Î
zUse multiple cameras in LAN
In the Multi-Device Settings page, you can see all devices searched in LAN. The 1st
Device is this device default. You can add more cameras list in LAN for monitoring .This
Web software Supports up to 9 IP Cameras online simultaneously.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
