Cambium Networks PTP 650 Bedienungsanleitung

Cambium

PTP 650

Installation Guide

UNDER DEVELOPMENT

Accuracy

While reasonable efforts have been made to assure the accuracy of this document, Cambium

Networks assumes no liability resulting from any inaccuracies or omissions in this document, or

from use of the information obtained herein. Cambium Networks reserves the right to make

changes to any products described herein to improve reliability, function, or design, and reserves

the right to revise this document and to make changes from time to time in content hereof with

no obligation to notify any person of revisions or changes. Cambium Networks does not assume

any liability arising out of the application or use of any product, software, or circuit described

herein; neither does it convey license under its patent rights or the rights of others. It is possible

that this publication may contain references to, or information about Cambium Networks

products (machines and programs), programming, or services that are not announced in your

country. Such references or information must not be construed to mean that Cambium Networks

intends to announce such Cambium Networks products, programming, or services in your

country.

Copyrights

This document, Cambium Networks products, and 3rd Party software products described in this

document may include or describe copyrighted Cambium Networks and other 3rd Party supplied

computer programs stored in semiconductor memories or other media. Laws in the United

States and other countries preserve for Cambium Networks, its licensors, and other 3rd Party

supplied software certain exclusive rights for copyrighted material, including the exclusive right

to copy, reproduce in any form, distribute and make derivative works of the copyrighted

material. Accordingly, any copyrighted material of Cambium Networks, its licensors, or the 3rd

Party software supplied material contained in the Cambium Networks products described in this

document may not be copied, reproduced, reverse engineered, distributed, merged or modified

in any manner without the express written permission of Cambium Networks. Furthermore, the

purchase of Cambium Networks products shall not be deemed to grant either directly or by

implication, estoppel, or otherwise, any license under the copyrights, patents or patent

applications of Cambium Networks or other 3rd Party supplied software, except for the normal

non-exclusive, royalty free license to use that arises by operation of law in the sale of a product.

Restrictions

Software and documentation are copyrighted materials. Making unauthorized copies is

prohibited by law. No part of the software or documentation may be reproduced, transmitted,

transcribed, stored in a retrieval system, or translated into any language or computer language,

in any form or by any means, without prior written permission of Cambium Networks.

License Agreements

The software described in this document is the property of Cambium Networks and its licensors.

It is furnished by express license agreement only and may be used only in accordance with the

terms of such an agreement.

High Risk Materials

Cambium and its supplier(s) specifically disclaim any express or implied warranty of fitness for

any high risk activities or uses of its products including, but not limited to, the operation of

nuclear facilities, aircraft navigation or aircraft communication systems, air traffic control, life

support, or weapons systems (“High Risk Use”). Any High Risk is unauthorized, is made at your

own risk and you shall be responsible for any and all losses, damage or claims arising out of any

High Risk Use.

UNDER DEVELOPMENT

Page 1

About this guide

This guide is supplied with PTP 650 ODUs. It describes how to install the site equipment for

PTP 650 Series links. Users of this guide require expertise in outdoor radio equipment

installation.

Related documents

For full PTP 650 installation planning instructions, refer to the PTP 650 Series User Guide.

Version information

Document number and version: phn-3350_000v002.

Date of publication: July 2013.

Waste Electrical and Electronic Equipment (WEEE)

For instructions on waste disposal of used products, refer to

http://www.cambiumnetworks.com/support

Page 2

UNDER DEVELOPMENT

Safety

Warning

To prevent loss of life or physical injury, observe the below safety guidelines. In no event shall

Cambium Networks be liable for any injury or damage caused during the installation of the

Cambium PTP 650. Ensure that only qualified personnel install a PTP 650 link.

Power lines

Exercise extreme care when working near power lines.

Working at heights

Exercise extreme care when working at heights.

Grounding and protective earth

The Outdoor Unit (ODU) must be properly grounded to protect against lightning. It is the user’s

responsibility to install the equipment in accordance with national regulations. In the USA,

follow Section 810 of the National Electric Code, ANSI/NFPA No.70-1984 (USA). In Canada, follow

Section 54 of the Canadian Electrical Code. These codes describe correct installation procedures

for grounding the outdoor unit, mast, lead-in wire and discharge unit, size of grounding

conductors and connection requirements for grounding electrodes. Other regulations may apply

in different countries and therefore it is recommended that installation of the outdoor unit be

contracted to a professional installer.

PSU

Always use one of the Cambium PTP 650 Series power supply units (PSU) to power the ODU.

Failure to use a Cambium supplied PSU could result in equipment damage and will invalidate

the safety certification and may cause a safety hazard.

Alternative DC supplies

If an AC supply is not required or an additional back up DC supply is required, the DC supply is

connected to the PSU DC IN terminals. This is the only method of supplying external DC to the

ODU. The DC supply must comply with the following requirements:

•The voltage and polarity is correct and is applied to the correct PIDU terminals.

•The power source is rated as Safety Extra Low Voltage (SELV).

•The power source is rated to supply at least 1A continuously.

•The power source cannot provide more than the Energy Hazard Limit as defined by

IEC/EN/UL60950-1, Clause 2.5, Limited Power (The Energy Hazard Limit is 240VA).

UNDER DEVELOPMENT

Page 3

Powering down before servicing

Always power down and unplug the equipment before servicing.

Lightning protection unit (LPU)

Hazardous voltages are present within the LPU. Do not remove the insulation tape or printed

circuit board when the LPU is connected to the power supply.

Primary disconnect device

The main power supply is the primary disconnect device.

External cables

Safety may be compromised if outdoor rated cables are not used for connections that will be

exposed to the outdoor environment.

Drop cable tester

The drop cable tester must NEVER be used at the ODU end connected to power from the PIDU.

It must only be used at the bottom of the mast with a multimeter. This is because the PIDU

voltage exceeds the limit allowed in some countries for safe handling in wet conditions and

therefore may create a safety hazard.

RF exposure near the antenna

Strong radio frequency (RF) fields will be present close to the antenna when the transmitter is

on. Always turn off the power to the ODU before undertaking maintenance activities in front of

the antenna.

Minimum separation distances

Ensure that personnel are not exposed to unsafe levels of RF energy. The units start to radiate as

soon as they are powered up. Never work in front of the antenna when the ODU is powered.

Install the ODUs so as to provide and maintain the minimum separation distances from all

persons. For minimum separation distances, see the PTP 650 Series User Guide.

Before connecting or disconnecting the drop cable from the PSU or ODU, always power down

the PSU.

Grounding and lightning protection requirements

Ensure that the installation meets the requirements defined in the PTP 650 Series User Guide.

Page 4

UNDER DEVELOPMENT

Grounding cable installation methods

When routing, fastening and connecting grounding cables, the following requirements must be

met:

•Grounding conductor runs are as short, straight and smooth as possible, with bends and

curves kept to a minimum.

•Grounding cables must not be installed with drip loops.

•All bends must have a minimum radius of 203 mm (8 in) and a minimum angle of 90°. A

diagonal run is preferable to a bend, even though it does not follow the contour or run

parallel to the supporting structure.

•All bends, curves and connections must be routed towards the grounding electrode system,

ground rod, or ground bar.

•Grounding conductors must be securely fastened.

•Braided grounding conductors must not be used.

•Approved bonding techniques must be used for the connection of dissimilar metals.

Siting ODUs and antennas

ODUs and external antennas are not designed to survive direct lightning strike. For this reason

they must be installed in Zone B as defined in PTP 650 Series User Guide. Mounting in Zone A

may put equipment, structures and life at risk.

Optical SFP module

The optical SFP module is a Class 1 Laser product. When installing it, observe the following

safety precautions:

•Do not look into the source of the laser beam (optical receptacle) directly or through an

optical system, as this is highly likely to damage vision.

•Always remove power from the system before the optical connection is made or unmade.

•When installing the optical interface, either cap the optical connector, or mate the connector

to an appropriate equipment connector.

•Ensure that the indoor end of the optical cable is appropriately labeled to ensure that service

personnel are aware the same Class 1 Laser hazard exists.

UNDER DEVELOPMENT

Page 5

Components

ODUs

For ODU part numbers, refer to the PTP 650 Series User Guide.

PSUs and line cords

The ODU kits (but not single ODUs) are supplied with one PSU and one US or EU line cord as

appropriate. Cambium Networks supply additional PSUs and line cords as follows:

Cambium description

Cambium part number

AC Power Injector N000065L001

AC+DC Power Injector Extended Temperature and Capacity (*) C000065L002

US Line Cord Fig 8 N000065L003

UK Line Cord Fig 8 N000065L004

EU Line Cord Fig 8 N000065L005

Australia Line Cord Fig 8 N000065L006

(*) The AC+DC Power Injector is required if the ODU has an AUX interface.

Connectorized ODU accessories

For connectorized ODUs, Cambium Networks supply RF cable and connectors as follows:

Cambium description

Cambium part number

50 Ohm Braided Coaxial Cable - 75 meter 30010194001

50 Ohm Braided Coaxial Cable - 500 meter 30010195001

RF CONNECTOR,N,MALE,STRAIGHT FOR CNT-400 CABLE 09010091001

Page 6

UNDER DEVELOPMENT

Copper Cat5e Ethernet cable and LPUs

Caution

Always use Cat5e cable that is gel-filled and shielded with copper-plated steel. Alternative

types of drop cable are not supported by Cambium Networks.

Note

The parts listed work with Superior Essex type BBDGe cable (as supplied by Cambium

Networks). They may not work with other types of cable.

Note

Five EMC strain relief cable glands are included in the LPU and grounding kit.

Cambium Networks supply Cat5e Ethernet cable and LPUs as follows:

Cambium description

Cambium part number

1000 ft Reel Outdoor Copper Clad CAT5E WB3175

328 ft (100 m) Reel Outdoor Copper Clad CAT5E WB3176

Cable Grounding Kits For 1/4" And 3/8" Cable 01010419001

Tyco/AMP, Mod Plug RJ45, 100 pack WB3177

Tyco/AMP Crimp Tool WB3211

RJ-45 Gland Spare – PG16 style (Qty. 10) N000065L033

PTP 650 LPU and Grounding Kit C000065L007

SFP modules

Cambium Networks supplie SFP modules as follows:

Cambium description

Cambium part number

PTP 650 Optical 1000BaseLX Ethernet SFP Module (*1) C000065L008

PTP 650 Optical 1000BaseSX Ethernet SFP Module (*1) C000065L009

PTP 650 Twisted Pair 1000BaseT Ethernet SFP Module C000065L010

(*1) Order optical cable from a specialist, quoting the optical cable specification in the PTP 650

Series User Guide.

UNDER DEVELOPMENT

Page 7

Typical deployment

A PTP 650 site typically consists of a high supporting structure such as a mast, tower or building

for the outdoor equipment (ODU and optional external antenna); and an equipment building or

moisture-proof enclosure for the indoor equipment (PSU).

In the basic configuration, there is only one Ethernet interface, a copper Cat5e connection from

the ODU (PSU port) to the PSU and network terminating equipment, as shown here:

Page 8

UNDER DEVELOPMENT

In more advanced configurations, there may be an optical or copper Cat5e SFP Ethernet interface

(unpowered) into the ODU (SFP port):

In more advanced configurations, there may be a copper Cat5e interface (with optional power

over Ethernet) into the ODU (AUX port):

Inhaltsverzeichnis

Andere Cambium Networks Netzwerk-Router Handbücher

Cambium Networks

Cambium Networks PMP 450 Series Bedienungsanleitung

Cambium Networks

Cambium Networks PTP 820 Series Bedienungsanleitung

Cambium Networks

Cambium Networks cnPilot Home R200 Series Bedienungsanleitung

Cambium Networks

Cambium Networks PTP 820S Bedienungsanleitung

Cambium Networks

Cambium Networks PTP 820C Bedienungsanleitung

Cambium Networks

Cambium Networks PTP 550 Series Bedienungsanleitung

Cambium Networks

Cambium Networks PTP 820C Bedienungsanleitung

Cambium Networks

Cambium Networks PTP 820C HP Bedienungsanleitung

Cambium Networks

Cambium Networks PTP 670 Series Bedienungsanleitung

Cambium Networks

Cambium Networks PTP 670 Series Bedienungsanleitung

Cambium Networks

Cambium Networks PTP 250 Bedienungsanleitung

Cambium Networks

Cambium Networks PTP 450 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise