Cameo ZENIT W600i Bedienungsanleitung

ZENIT®W600i

OUTDOOR LED WASH LIGHT FOR FIXED INSTALLATION

CLZW600i

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D´UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D´USO

MULTIPLE

ANGLES

CONTENTS / INHALTSVERZEICHNIS / TABLE DES MATIÈRES / CONTENIDO /

SPIS TREŚCI / CONTENUTO

ENGLISH

INFORMATION ON THIS USER MANUAL 6

INTENDED USE 6

DEFINITIONS AND SYMBOL EXPLANATIONS 6

SAFETY INSTRUCTIONS 7

INSTRUCTIONS FOR INSTALLATION EQUIPMENT 10

FEATURES 11

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 11

SIGNAL AND POWER CABLE 13

OPERATION 15

ADJUSTING LIGHT HEAD TILT 23

INSTALLATION AND TRUSS MOUNTNG 24

INSTALLATION OF OPTIONAL ACCESSORIES 25

INSTALL SPOTLIGHT WITH OPTIONAL MOUNTING PLATE 26

CARE, MAINTENANCE AND REPAIR 27

OPTIONAL ACCESSORIES 29

TECHNICAL DATA 30

EXPLANATION OF IP PROTECTION CLASS 32

EXPLANATORY NOTES ON IK IMPACT RESISTANCE RATING 33

MINIMUM DISTANCE TO ILLUMINATED SURFACE 33

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS 33

DISPOSAL 34

MANUFACTURER’S DECLARATIONS 34

DEUTSCH

INFORMATIONEN ZU DIESER BEDIENUNGSANLEITUNG 36

BESTIMMUNGSGEMÄSSER GEBRAUCH 36

BEGRIFFS- UND SYMBOLERKLÄRUNGEN 36

SICHERHEITSHINWEISE 37

HINWEISE FÜR INSTALLATIONSGERÄTE 41

EIGENSCHAFTEN 41

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 42

SIGNAL- UND NETZKABEL 43

BEDIENUNG 45

EINSTELLEN DER LEUCHTKÖRPERNEIGUNG 54

AUFSTELLUNG UND TRAVERSENMONTAGE 55

OPTIONALES ZUBEHÖR MONTIEREN 56

SCHEINWERFER MITTELS OPTIONALER MONTAGEPLATTE INSTALLIEREN 58

PFLEGE, WARTUNG UND REPARATUR 59

OPTIONALES ZUBEHÖR 61

TECHNISCHE DATEN 62

ERLÄUTERUNGEN ZUR IP SCHUTZART 64

ERLÄUTERUNGEN ZUM IK STOSSFESTIGKEITSGRAD 65

MINDESTABSTAND ZUR BELEUCHTETEN FLÄCHE 65

MINDESTABSTAND ZU NORMAL ENTFLAMMBAREN MATERIALIEN 65

ENTSORGUNG 66

HERSTELLERERKLÄRUNGEN 66

FRANÇAIS

INFORMATIONS CONCERNANT CE MANUEL D’UTILISATION 67

UTILISATION CONFORME 67

EXPLICATIONS DES TERMES ET DES SYMBOLES 67

CONSIGNES DE SÉCURITÉ 68

CONSIGNES POUR LES APPAREILS D’INSTALLATION 72

CARACTÉRISTIQUES 72

RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET D’AFFICHAGE 73

CÂBLES DE SIGNAL ET RÉSEAU 74

UTILISATION 76

RÉGLAGE DE L’INCLINAISON DU CORPS LUMINEUX 86

INSTALLATION ET MONTAGE SUR TRAVERSE 87

MONTAGE DES ACCESSOIRES EN OPTION 88

INSTALLATION DU PROJECTEUR À L’AIDE DE LA PLAQUE DE MONTAGE EN OPTION 90

ENTRETIEN, MAINTENANCE ET RÉPARATION 90

ACCESSOIRES EN OPTION 93

CARACTÉRISTIQUES TECHNIQUES 94

EXPLICATIONS RELATIVES À L’INDICE DE PROTECTION IP 96

EXPLICATIONS RELATIVES À L’INDICE DE RÉSISTANCE AUX CHOCS IK 97

DISTANCE MINIMALE PAR RAPPORT À LA SURFACE ÉCLAIRÉE 97

DISTANCE MINIMALE PAR RAPPORT AUX MATÉRIAUX NORMALEMENT INFLAMMABLES 97

ÉLIMINATION 98

DÉCLARATIONS DU FABRICANT 98

ESPAÑOL

INFORMACIÓN SOBRE ESTE MANUAL DE INSTRUCCIONES 99

USO PREVISTO 99

TÉRMINOS Y SÍMBOLOS 99

INSTRUCCIONES DE SEGURIDAD 100

INSTRUCCIONES PARA LOS EQUIPOS DE INSTALACIÓN 104

CARACTERÍSTICAS 104

CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS DE VISUALIZACIÓN 105

CABLE DE SEÑAL Y DE ALIMENTACIÓN 106

FUNCIONAMIENTO 108

AJUSTE DE LA INCLINACIÓN DE LA LÁMPARA 117

INSTALACIÓN Y MONTAJE EN TRAVESAÑO 118

MONTAJE DE LOS ACCESORIOS OPCIONALES 119

INSTALACIÓN DEL FOCO CON PLACA DE MONTAJE OPCIONAL 121

CUIDADO, MANTENIMIENTO Y REPARACIÓN 122

ACCESORIOS OPCIONALES 124

DATOS TÉCNICOS 125

EXPLICACIÓN SOBRE LA CLASE DE PROTECCIÓN IP 127

EXPLICACIÓN SOBRE EL GRADO DE RESISTENCIA A LOS IMPACTOS IK 128

DISTANCIA MÍNIMA CON RESPECTO A LA SUPERFICIE ILUMINADA 128

DISTANCIA MÍNIMA CON RESPECTO A MATERIALES NORMALMENTE INFLAMABLES 128

ELIMINACIÓN 129

DECLARACIONES DEL FABRICANTE 129

CONTENTS / INHALTSVERZEICHNIS / TABLE DES MATIÈRES / CONTENIDO /

SPIS TREŚCI / CONTENUTO

POLSKI

INFORMACJE DOTYCZĄCE NINIEJSZEJ INSTRUKCJI OBSŁUGI 130

UŻYTKOWANIE ZGODNE Z PRZEZNACZENIEM 130

OBJAŚNIENIA TERMINÓW I SYMBOLI 130

ZASADY BEZPIECZEŃSTWA 131

UWAGI DOTYCZĄCE URZĄDZEŃ SŁUŻĄCYCH DO MONTAŻU 135

CHARAKTERYSTYKA 135

PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 136

PRZEWÓD SYGNAŁOWY I SIECIOWY 137

OBSŁUGA 139

REGULACJA ODCHYLENIA ŚWIATŁA 148

USTAWIANIE I MONTAŻ NA KRATOWNICY 149

MONTAŻ OPCJONALNYCH AKCESORIÓW 150

INSTALACJA REFLEKTORA PRZY UŻYCIU OPCJONALNEJ PŁYTY MONTAŻOWEJ 152

CZYSZCZENIE, KONSERWACJA I NAPRAWY 153

AKCESORIA DODATKOWE 155

DANE TECHNICZNE 156

OBJAŚNIENIA DOTYCZĄCE STOPNIA OCHRONY IP 158

UWAGI DOTYCZĄCE POZIOMU ODPORNOŚCI NA WSTRZĄSY IK 159

MINIMALNA ODLEGŁOŚĆ OD POWIERZCHNI OŚWIETLONEJ 159

MINIMALNA ODLEGŁOŚĆ OD NORMALNIE ŁATWOPALNYCH MATERIAŁÓW 159

UTYLIZACJA 160

DEKLARACJE PRODUCENTA 160

ITALIANO

INFORMAZIONI SUL PRESENTE MANUALE D'USO 161

UTILIZZO CONFORME 161

SPIEGAZIONE DI CONCETTI E SIMBOLI 161

INDICAZIONI SULLA SICUREZZA 162

NOTE SUI DISPOSITIVI PER INSTALLAZIONI ELETTRICHE 166

CARATTERISTICHE 166

CONNETTORI, ELEMENTI DI COMANDO E DI VISUALIZZAZIONE 167

CAVI DI SEGNALE E DI ALIMENTAZIONE 168

UTILIZZO 170

REGOLAZIONE DELL'INCLINAZIONE DELLA LAMPADA 179

INSTALLAZIONE E MONTAGGIO SU TRAVERSA 180

MONTAGGIO DEGLI ACCESSORI OPZIONALI 181

INSTALLAZIONE DEL PROIETTORE CON LA PIASTRA DI MONTAGGIO OPZIONALE 183

PULIZIA, MANUTENZIONE E RIPARAZIONE 184

ACCESSORI OPZIONALI 186

DATI TECNICI 187

SPIEGAZIONI SUL GRADO DI PROTEZIONE IP 189

SPIEGAZIONI SUL LIVELLO DI RESISTENZA AGLI URTI IK 190

DISTANZA MINIMA DALLA SUPERFICIE ILLUMINATA 190

DISTANZA MINIMA DAI MATERIALI NORMALMENTE INFIAMMABILI 190

SMALTIMENTO 191

DICHIARAZIONI DEL PRODUTTORE 191

CONTENTS / INHALTSVERZEICHNIS / TABLE DES MATIÈRES / CONTENIDO /

SPIS TREŚCI / CONTENUTO

DMX

DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX / CONTROL DMX /

STEROWANIE DMX / CONTROLLO DMX 192

CONTENTS / INHALTSVERZEICHNIS / TABLE DES MATIÈRES / CONTENIDO /

SPIS TREŚCI / CONTENUTO

DEUTSCHENGLISH DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

ENGLISH

YOU HAVE MADE THE RIGHT CHOICE!

This device has been developed and manufactured to the highest quality standards to ensure

many years of problem-free operation. Please read this manual carefully to be able to use your

new Cameo product quickly and optimally. Further information about Cameo Light is available on

our website CAMEOLIGHT.com.

INFORMATION ON THIS USER MANUAL

•Carefully read the safety instructions and the entire manual before operating the device.

•Observe the warnings on the device and in the user manual.

•Always keep the user manual within reach.

•If you sell or pass on the device, it is important that you also include this user manual, as it is an

integral part of the product.

INTENDED USE

This product is an outdoor spotlight for permanent installation! This spotlight is intended exclu-

sively for professional users and is not suitable for private households or third parties! Use of

the product outside the specified technical data and operating conditions, as well as incorrect

installation, is considered inappropriate! Liability for damage and third-party damage to persons

and property due to inappropriate use is excluded!

The product is not suitable for:

• Use by persons (including children) with limited physical, sensory

or mental abilities or lack of experience and knowledge.

• Children (children must be instructed not to play with the device).

DEFINITIONS AND SYMBOL EXPLANATIONS

1. HAZARD: The word HAZARD, possibly in combination with a symbol, indicates situations in

which there is an immediate danger or risk of potentially fatal injury.

2. WARNING: The word WARNING, possibly in combination with a symbol, indicates situations in

which there is an immediate danger or risk of potentially fatal injury.

3. CAUTION: The word CAUTION, possibly in combination with a symbol, indicates situations or

conditions that could result in injury.

4. ATTENTION: The word ATTENTION, possibly in combination with a symbol,

indicates situations or states that may lead to property damage and/or environmental damage

DEUTSCH ENGLISH

DMX FRANCAIS

ESPAÑOLITALIANO POLSKI

This symbol identifies hazards that can cause electric shock.

This symbol identifies hazardous areas or hazardous situations.

This symbol indicates hazards caused by hot surfaces.

This symbol indicates hazards caused by intense light sources.

This symbol indicates a device in which there are no user-replaceable parts.

This symbol indicates additional information on the operation of the product.

SAFETY INSTRUCTIONS

HAZARD:

1. Do not open the device and do not perform any modifications.

2. If your device no longer functions properly, if liquids or objects get inside it or if it

has been damaged in any other way, switch it off immediately and unplug it from

the power source. The device may be repaired only by authorised repair techni-

cians.

3. For devices of protection class 1, the protective conductor must be connected

correctly. Never disconnect the protective conductor. Devices of protection class 2

do not have a protective conductor.

4. Ensure that live cables are not kinked or otherwise mechanically damaged.

5. Never bypass the device fuse.

WARNING:

1. The device may not be operated if it shows obvious signs of damage.

2. The device may only be installed in a voltage-free state.

3. If the device's power cable is damaged, the device may not be used.

4. Permanently connected power cables may only be replaced by a qualified person.

DEUTSCHENGLISH DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

CAUTION:

1. Do not switch on the device if it has been exposed to extreme temperature fluctu-

ations (for example, following transport). Moisture and condensation can damage

the device. Switch on the device only when it has reached room temperature.

2. Ensure that the voltage and frequency of the mains supply match the values

specified on the device. If the device has a voltage selector switch, do not connect

the device until it has been set correctly. Use only suitable power cables.

3. To disconnect the device from the mains on all poles, it is not sufficient to press

the on/off switch on the device.

4. Make sure that the fuse used corresponds to the type printed on the device.

5. Ensure that suitable measures have been taken against overvoltage (e.g. lightning

strikes).

6. Observe the specified maximum output current on devices with a Power Out con-

nection. Ensure that the total current consumption of all connected devices does

not exceed the specified value.

7. Replace pluggable power cables with original cables only.

HAZARD:

1. Choking hazard! Plastic bags and small parts must be kept out of reach of per-

sons (including children) with reduced physical, sensory or mental capabilities.

2. Risk of falling! Make sure that the device is securely installed and will not fall

down. Only use suitable stands or mountings (particularly for fixed installations).

Ensure that accessories are properly installed and secured. Ensure that applicable

safety regulations are observed.

WARNING:

1. Use the device in the prescribed manner only.

2. Operate the device using only accessories of the type recommended and supplied

by the manufacturer.

3. Observe safety regulations applicable in your country during installation.

4. After connecting the device, ensure that all cables are routed so as to avoid dam-

age or accidents, such as from tripping.

5. Always observe the specified minimum distance to normally flammable materials!

Unless explicitly stated, the minimum distance is 0.3 m.

6. Always observe the minimum distance to the illuminated surface that can be read

on the device!

DEUTSCH ENGLISH

DMX FRANCAIS

ESPAÑOLITALIANO POLSKI

CAUTION:

1. Moving components such as mounting brackets may become jammed.

2. In the case of devices with motor-driven components, there is a risk of injury due

to the movement of the device. Sudden movement of the device can cause shock

reactions.

3. The housing surface of the device can become very hot during regular operation.

Ensure that accidental touching of the housing is not possible. Always allow the

lamp to cool sufficiently before removal, maintenance work and charging etc.

CAUTION:

1. Do not install or use the device in the vicinity of radiators, accumulators, stoves,

or other heat sources Ensure that the device is always installed in such a way

that it is sufficiently cooled and cannot overheat.

2. Do not place any ignition sources, such as burning candles, near the device.

3. Ventilation openings may not be covered and fans may not be blocked.

4. For transport, use the original packaging or packaging provided by the manufac-

turer.

5. Avoid any impacts to or shaking of the device.

6. Observe the IP rating and the ambient conditions such as temperature and hu-

midity according to the specification.

7. Devices can be continuously further developed. In the event of deviating informa-

tion on operating conditions, performance or other device properties between the

user manual and the device labelling, the information on the device always has

priority.

8. The device is not suitable for tropical climate zones or for operation over 2,000m

above sea level.

9. Unless explicitly stated, the device is not suitable for operation under marine

conditions.

CAUTION! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS!

1. Never look directly into the beam of light, not even for a short period of time.

2. Never look into the beam of light using optical devices such as a magnifying

glass.

3. Stroboscopic effects may cause epileptic seizures in those susceptible!

DEUTSCHENGLISH DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

4. A permanently installed lamp is installed in this lighting unit which must not be

replaced by the user. In the event of a fault, please contact your sales partner.

INSTRUCTIONS FOR INSTALLATION EQUIPMENT

1. Equipment for installation applications is designed for continuous operation.

2. Equipment for outdoor installation is largely weather-resistant. Depending on the design,

however, installed seals may be made of materials that deteriorate over time. These must be

checked regularly and replaced if necessary.

3. The correct condition of the housing parts and connections must be checked regularly.

4. Surfaces and plastic parts can also weather in installation equipment, e.g. due to UV irradia-

tion. This generally does not impair functionality.

5. Damage to the surface coating can impair the device's corrosion protection. Damaged sur-

face coating (e.g. scratches) must be promptly repaired by suitable measures.

6. Screw connections can be impaired in their freedom of movement (e.g. due to oxidation or

impurities). Here, appropriate measures for loosening are to be implemented.

7. Unless explicitly stated otherwise on the device or in the technical data, the devices are

intended for installation heights of less than 5 m.

NOTES FOR INSTALLATION DEVICES

1. units for installation applications are designed for continuous operation.

2. units for outdoor installation are largely weatherproof. However, depending on the design,

seals made of ageing materials are installed. These must be checked regularly and replaced if

necessary.

3. The correct condition of the housing parts and connections must be checked regularly.

4. Surfaces and plastic parts of installation units can also weather, e.g. due to UV radiation. This

does not usually lead to functional restrictions.

5. Damage to the surface coating can impair the corrosion protection of the unit. A damaged

surface coating (e.g. scratches) must be restored promptly by suitable measures.

6. The freedom of movement of screw connections can be impaired (e.g. by oxidation or contami-

nation). If necessary, appropriate measures must be taken to loosen them.

7. Unless explicitly stated otherwise on the unit or in the technical data, the units are intended for

installation heights of less than 5 m.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Cameo Beleuchtungsausrüstung Handbücher

Cameo

Cameo EVOS W7 IP Bedienungsanleitung

Cameo

Cameo H1 D Bedienungsanleitung

Cameo

Cameo SNAPBAG CLZW600SSBS Bedienungsanleitung

Cameo

Cameo OTOS H5 Bedienungsanleitung

Cameo

Cameo S2 IP Bedienungsanleitung

Cameo

Cameo LED MINI TRI PAR CAN 3 W Bedienungsanleitung

Cameo

Cameo LED TRI CLMOVER1 Bedienungsanleitung

Cameo

Cameo F1 T Bedienungsanleitung

Cameo

Cameo CLPIXBAR200PRO Bedienungsanleitung

Cameo

Cameo AURO SPOT 300 Bedienungsanleitung

Cameo

Cameo CL 200 G2 Bedienungsanleitung

Cameo

Cameo CLSTROBE1 Bedienungsanleitung

Cameo

Cameo SNAPBAG F Series Bedienungsanleitung

Cameo

Cameo PIXBAR DTW PRO Bedienungsanleitung

Cameo

Cameo CLSTORM Bedienungsanleitung

Cameo

Cameo PAR 56 CAN Bedienungsanleitung

Cameo

Cameo CLLWOOKIE150G WOOKIE SERIES Bedienungsanleitung

Cameo

Cameo FLAT PAR CAN CLPFLAT1TRI3WIR Bedienungsanleitung

Cameo

Cameo CLP56TRI3W Bedienungsanleitung

Cameo

Cameo F2 FC Bedienungsanleitung

Cameo

Cameo HYDRABEAM 600 RGBW Bedienungsanleitung

Cameo

Cameo CLBARL10RGBA Bedienungsanleitung

Cameo

Cameo OCTAFLY Bedienungsanleitung

Cameo

Cameo OTOS SP6 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung