Campbell Hausfeld Finishing Nailer JB006750 Bedienungsanleitung

tion equipment such as head, hear-

ing and foot protection equipment.

Serious eye or permanent hearing

loss could result.

• Assuring that the tool is kept in

safe working order as described in

this manual.

• Assuring the proper maintenance

of all tools in employer’s possession.

• Ensuring that tools which require

repair are not further used before

repair. Tags and physical segrega-

tion are recommended means of

control.

Danger

indicates

an imminently hazardous situation

which, if not avoided, WILL result in

death or serious injury.

Table of Contents

General Safety . . . . . . . . . . . . .1-3

Specifications . . . . . . . . . . . . . . . 2

Operating The Nailer . . . . . . . 3-5

Operational Mode . . . . . . . . . . . 4

Troubleshooting . . . . . . . . . . . . 7

Warranty . . . . . . . . . . . . . . . . . . 8

Description

This nailer is designed for decorative

trim, molding, window casings, furni-

ture trim and picture frame assembly.

Features include: convenient top load-

ing magazine which holds up to 100

nails, no-mar tip, adjustable exhaust,

single cycle trigger, quick clear nose,

and an adjustable depth of drive mech-

anism.

General Safety

Information

CALIFORNIA PROPOSITION 65

You can create dust when

you cut, sand, drill or grind

materials such as wood,

paint, metal, concrete, cement, or other

masonry. This dust often contains

chemicals known to cause cancer, birth

defects, or other reproductive harm.

Wear protective gear.

This manual contains safety, opera-

tional and maintenance information.

Contact your Campbell Hausfeld repre-

sentative if you have any questions.

OPERATOR’S RESPONSIBILITY:

The tool operator is responsible for:

• Reading and understanding tool

labels and manual.

• Selecting an appropriate tool actua-

tion system, taking into considera-

tion the work application for which

the tool is used.

• The safe use of the tool.

• Ensuring that the

tool is used only

when the operator

and all other person-

nel in the work area

are wearing ANSI Z87 eye protec-

tion equipment, and when

required, other appropriate protec-

tion equipment such as head, hear-

ing and foot protection equipment.

Serious eye or permanent hearing

loss could result.

• Assuring that the tool is kept in safe

working order as described in this

manual.

EMPLOYER’S RESPONSIBILITY:

• Selecting an appropriate tool actua-

tion system, taking into considera-

tion the work application for which

the tool is used.

• Ensuring that this manual is avail-

able to operators and personnel

performing maintenance.

• The safe use of the tool.

• Enforcing that the

tool is used only

when the operator

and all other person-

nel in the work area

are wearing ANSI Z87 eye protec-

tion equipment, and when

required, other appropriate protec-

Operating Instructions Model JB006750

Finishing

Nailer

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or

property damage! Retain instructions for future reference.

Model JB006750

IN726700AV 7/08

Campbell Hausfeld Nailers meet or exceed

Industries’ Standards as set forth by the

American National Standard

Institute/International Staple, Nail and Tool

Association in ANSI/ISANTA SNT-101-2002.

See Warranty on page 8 for important information about commercial use of this product.

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

For parts, product & service information

visit www.chpower.com

Locate model and date code on tool

and record below:

Model No. ________________________

Date Code ________________

Retain these numbers for

future reference.

General Safety

Information (Continued)

●Read and understand

tool labels and manual.

Failure to follow warn-

ings, dangers, and cau-

tions could result in

DEATH or SERIOUS INJURY.

●Do not use any type

of reactive gases,

including, but not lim-

ited to, oxygen and

combustible gases, as

a power source. Use

filtered, lubricated, regulated com-

pressed air only. Use of a reactive

gas instead of compressed air may

cause the nailer to explode which

will cause death or serious personal

injury.

●Use only a pressure-

regulated compressed

air source to limit the

air pressure supplied

to the tool. The regu-

lated pressure must

not exceed 110 psi. If the regulator

fails, the pressure delivered to the

tool must not exceed 200 psi. The

nailer could explode which will

cause death or serious personal

injury.

●Never use gasoline

or other flammable

liquids to clean the

nailer. Never use the

nailer in the presence

of flammable liquids or gases.

Vapors could ignite by a spark and

cause an explosion which will result

in death or serious personal injury.

●Always remain in a

firmly balanced posi-

tion when using or

handling the nailer.

●Do not remove,

tamper with, or

otherwise cause

the Work Contact

Element (WCE) or

trigger to become

inoperable. Do not operate any tool

which has been modified in a like

fashion. Death or serious personal

injury could result.

●Do not touch the

trigger unless dri-

ving nails. Never

attach air line to

nailer or carry

nailer while

touching the trigger. The tool could

eject a fastener which will result in

death or serious personal injury.

Warning

indicates

a potentially hazardous situation

which, if not avoided, COULD result in

death or serious injury.

●Always discon-

nect the tool

from the power

source when

unattended,

performing any

maintenance or repair, clearing a

jam, or moving the tool to a new

location. Always reconnect the air

line BEFORE loading any fasteners.

Do not load the tool with fasteners

when either the trigger is depressed

or the Work Contact Element (WCE)

is engaged. The nailer could eject a

fastener causing death or serious

personal injury.

●Always fit tool

with a fitting

or hose cou-

pling on or

near the tool in

such a manner

that all compressed air in the tool is

discharged at the time the fitting or

hose coupling is disconnected. Do

not use a check valve or any other fit-

ting which allows air to remain in the

nailer. Death or serious personal

injury could occur.

●Never place hands or

any other body parts in

the nail discharge area

of the nailer. The nailer

might eject a fastener

and could result in

death or serious personal injury.

●Never carry the

nailer by the air

hose or pull the

hose to move the

nailer or a com-

pressor. Keep

hoses away from

heat, oil and sharp edges. Replace

any hose that is damaged, weak or

worn. Personal injury or tool dam-

age could occur.

Model JB006750

Operating Instructions

• REQUIRES: 0.7 SCFM with 10 nails

per minute @ 90 psi

• AIR INLET: 1/4” NPT

• NAIL SIZE RANGE: 1” to 2-1/2”

• MAGAZINE CAPACITY:

100 Nails per load, 16 gauge

• WEIGHT: 4 lbs., 15 oz.

• LENGTH: 12-1/2”

• HEIGHT: 11-7/8”

• MAXIMUM PRESSURE: 110 psi

• PRESSURE RANGE: 70 - 110 psi

Nailer Components And Specifications

www.chpower.com

CAMPBELL

PROFESSIONAL

HAUSFELD

Adjustable Exhaust

Name, Spec

and Warning

Label (back-side

and top)

Magazine

(open)

Trigger

Work Contact

Element (WCE)

No-Mar Tip

Quick Clear

Latch

Depth

Adjustment

Wheel

OCO2

Magazine

Latch

Recommended Hookup

Quick

Plug

Quick

Coupler

Air

Hose

Quick Plug

(Optional)

Quick

Coupler

(Optional)

Oiler

Regulator

Filter

General Safety

Information (Continued)

●Always assume the nailer contains

nails. Respect the tool as a working

implement; no horseplay. Always

keep others at a safe distance from

the work area in case of accidental

discharge of nails. Do not point the

tool toward yourself or anyone

whether it contains fasteners or not.

Accidental triggering of the nailer

could result in death or serious per-

sonal injury.

●Do not drive a

nail on top of

other nails. The

nail could glance

and cause death

or a serious punc-

ture wound.

●Do not operate

or allow anyone

else to operate

the nailer if any

warnings or

warning labels

are not legible. Warnings or warning

labels are located on the nailer maga-

zine and body.

●Do not drop or throw the tool.

Dropping or throwing the tool can

result in damage that will make the

tool unusable or unsafe. If the tool

has been dropped or thrown, exam-

ine the tool closely for bent, cracked

or broken parts and air leaks. STOP

and repair before using or serious

injury could occur.

Caution

indicates

a potentially hazardous situation

which, if not avoided, MAY result in

minor or moderate injury.

●Do not make any modifications to the

tool without first obtaining written

Standard B19.3-1991; Safety

Standard for Compressors for

Process Industries. Contact your air

compressor manufacturer for

information.

Operating The Nailer

LUBRICATION

This nailer requires lubrication before

using the nailer for the first time and

before each use. If an inline oiler is

used, manual lubrication through the

air inlet is not required on a daily basis.

The work

surface can

become damaged by excessive lubrication.

Proper lubrication is the owner’s responsi-

bility. Failure to lubricate the nailer prop-

erly will dramatically shorten the life of

the nailer and void your warranty.

1. Disconnect the

air supply from

the nailer to

add lubricant.

2. Turn the nailer

so the air inlet

is facing up.

Place 4-5 drops

of 30 W non-

detergent oil into air inlet. Do not

use detergent oils, oil additives, or

air tool oils. Air tool oils contain sol-

vents which will damage the nailer's

internal components.

3. After adding oil,

run nailer briefly.

Wipe off any

excess oil from

the cap exhaust.

approval from Campbell Hausfeld. Do

not use the nailer if any shields or

guards are removed or altered. Do

not use the nailer as a hammer.

Personal injury or tool

damage may occur.

●Avoid long extended periods of

work with the nailer. Stop using the

nailer if you feel pain in hands or

arms.

●Always check

that the Work

Contact Element

(WCE) is operat-

ing properly. A

nail could acci-

dentally be dri-

ven if the WCE

is not working properly. Personal

injury may occur (See "Checking the

Work Contact Element" Section).

●Disconnect air supply and release

tension from the pusher before

attempting to clear jams because

fasteners can be ejected from the

front of the nailer. Personal injury

may occur.

Notice

indicates

important information, that if not fol-

lowed, MAY cause damage to equip-

ment.

●Avoid using the nailer when the

magazine is empty. Accelerated

wear on the nailer may occur.

●Clean and check all air supply hoses

and fittings before connecting the

nailer to an air supply. Replace any

damaged or worn hoses or fittings.

Tool performance or durability may

be reduced.

●Air compressors providing air to the

nailer should follow the require-

ments established by the American

National Standards Institute

Model JB006750

Operating Instructions

OIL

www.chpower.com

O I L

!WARNING

Operating The Nailer

(Continued)

RECOMMENDED HOOKUP

The illustration below shows the

recommended hookup for the nailer.

1. The air com-

pressor must be

able to main-

tain a minimum

of 70 psi when

the nailer is being used. An inade-

quate air supply can cause a loss of

power and inconsistent driving.

2. An oiler can be

used to provide oil

circulation through

the nailer. A filter

can be used to

remove liquid and solid impurities

which can rust or “gum up” internal

parts of the nailer.

3. Always use air supply hoses with a

minimum working pressure rating

equal to or greater than the pres-

sure from the power source if a reg-

ulator fails, or 150 psi, whichever is

greater. Use 3/8” air hose for runs

up to 50’. Use 1/2” air hoses for 50’

run or longer. For better perfor-

mance, install a 3/8” quick plug

(1/4” NPT threads) with an inside

diameter of .315” (8mm) on the

nailer and a 3/8” quick coupler on

the air hose.

4. Use a pressure regulator on the

compressor, with an operating pres-

sure of 0 - 125 psi. A pressure regu-

lator is required to control the oper-

ating pressure of the nailer

between 70 and 110 psi.

4. Reconnect air

supply to the

nailer.

5. Depress the

Work Contact

Element (WCE)

against the

work surface

without pulling the trigger. The

nailer MUST NOT OPERATE. Do not

use the tool if it operates without

pulling the trigger. Personal injury

may result.

6. Remove the

nailer from the

work surface.

The Work

Contact

Element (WCE) must return to its

original down position. The nailer

MUST NOT OPERATE. Do not use

the tool if it operates while lifted

from the work surface. Personal

injury may result.

7. Pull the trig-

ger and

depress the

work contact

element

(WCE) against the work surface. The

nailer MUST NOT OPERATE.

8. Depress the

Work Contact

Element

(WCE) against

the work sur-

face. Pull the trigger. The nailer

MUST OPERATE.

An improperly functioning tool must

not be used. Do not actuate the tool

unless the tool is placed firmly against

the work piece.

LOADING/UNLOADING THE NAILER

1. Always connect the tool to the air

supply before loading fasteners.

2. Press down on

the release

latch. Pull back

on the maga-

zine cover.

OPERATIONAL MODE

Always

know the

operational mode of the nailer before

using. Failure to know the operational

mode could result in death or serious

personal injury.

SINGLE CYCLE MODE

This mode

requires the trig-

ger to be pulled

each time a nail

is driven. The

nailer can be actuated by depressing

the WCE against the work surface fol-

lowed by pulling the trigger.

The trigger must be released to reset

the tool before another nail can be dri-

ven.

WORK CONTACT ELEMENT (WCE)

Check the

operation

of the Work Contact Element (WCE) trip

mechanism before each use. The WCE

must move freely without binding

through its entire travel distance. The

WCE spring must return the WCE to its

fully extended position after being

depressed. Do not operate the nailer if

the WCE trip mechanism is not operat-

ing properly. Personal injury may occur.

1. Disconnect the

air supply from

the nailer.

2. Remove all

nails from the

magazine (see

Loading/

Unloading).

3. Make sure the

trigger and

work contact

element (WCE)

move freely up

and down without sticking or bind-

ing.

Model JB006750

Operating Instructions

1 2

CAMPBELL

PROFESSIONAL

HAUSFELD

movement

www.chpower.com

70 psi

Min.

110 psi

Max.

150 psi or greater

3/8” I.D.

3. Insert a stick of

Campbell

Hausfeld nails

or equivalent

(see Fastener

Section) into the magazine. Make

sure the pointed ends of the nails are

resting on the bottom ledge of the

magazine when loading. Make sure

the nails are not dirty or damaged.

4. Push the maga-

zine cover for-

ward until the

latch catches.

5. Always unload all fasteners before

removing tool from service.

Unloading is the reverse of loading,

except always disconnect the air

hose before unloading.

ADJUSTING THE NAIL PENETRATION

The tool is equipped with an adjustable

depth of drive feature. This allows the

user to determine how deep a fastener

will be driven into the work surface.

1. Adjust operating pressure so nails

are driven consistently. Do not

exceed 110 psi.

2. To drive the nail shallower, turn the

wheel (C) to left to the extent

desired.

3. To sink a nail deeper, turn the wheel

4. Make sure trigger

and work contact ele-

ment (WCE) move

freely up and down

without binding or

sticking after each adjustment.

ADJUSTING THE DIRECTION OF THE

EXHAUST

The tool is

equipped with an

adjustable direc-

tion exhaust

deflector. This is intended to allow the

user to change the direction of the

exhaust. Simply twist the deflector to

any direction desired.

CLEARING A JAM FROM THE NAILER

1. Disconnect the

air supply from

the nailer.

2. Remove all

nails from the

magazine (see

Loading/

Unloading).

Failure to do so will cause the nails

to eject from the front of the tool.

3. Undo latch by

pulling out and

down. The wire

latch will disen-

gage from the

hooks on the nose.

4. The door can

now be rotat-

ed, exposing

the jammed

fastener.

5. Remove the

jammed fasten-

er, using pliers

or a screwdriver

if required.

6 Rotate door

back into the

closed position.

7. Extend the

wire latch and

place over the

hooks on the

nose.

8. Close the latch

by pushing the

latch up and in

until the latch

snaps into place.

Make sure the

trigger and

work contact

element (WCE)

move freely up

and down without sticking or binding.

Technical Support

Please call our Nailer Hotline at 1-800-

543-6400 with any questions regarding

the operation or repair of this nailer or

for additional copies of this manual.

Fastener And Replacement

Parts

Use only

genuine

Campbell Hausfeld 16 gauge fasteners

(or equivalent) - see Fastener

Interchange Information. Tool perfor-

mance, safety and durability could be

reduced if improper fasteners are used.

When ordering replacement parts or

fasteners, specify by part number.

Nailer Repair

Only qualified personnel should repair

the tool and they should use genuine

Campbell Hausfeld replacement parts

and accessories, or parts and acces-

sories which perform equivalently.

Assembly Procedure For

Seals

When repairing a nailer, the internal

parts must be cleaned and lubricated.

Parker O-lube or equivalent must be

used on all o-rings. Each o-ring must be

coated with O-lube before assembling.

A small amount of oil must be used on

all moving surfaces and pivots. After

reassembling, a few drops of 30W non-

detergent oil or equivalent, must be

added through the air line before

testing.

Model JB006750

Operating Instructions

www.chpower.com

(C)

Rotate

Operating The Nailer

(Continued)

movement

Model JB006750

Operating Instructions

Fasteners

The following Campbell Hausfeld finishing nails are available at local retail stores. If you need help locating any item,

call customer service at 1-800-543-6400. Campbell Hausfeld nails meet or exceed ASTM Standard F1667.

Shank Nails Per Nails Per

Model # Length Gauge Finish Head Collation Stick Box

FB003060 1-1/4” 16 Gauge Galvanized Brad Adhesive 50 2500

FB004060 1-1/2” 16 Gauge Galvanized Brad Adhesive 50 2500

FB004560 1-3/4” 16 Gauge Galvanized Brad Adhesive 50 2500

FB005060 2” 16 Gauge Galvanized Brad Adhesive 50 2500

FB006560 2-1/2” 16 Gauge Galvanized Brad Adhesive 50 2500

FB160025 1" 16 Gauge Galvanized Brad Adhesive 50 1000

FB160040 1-1/2” 16 Gauge Galvanized Brad Adhesive 50 1000

FB160050 2" 16 Gauge Galvanized Brad Adhesive 50 1000

FB160065 2-1/2” 16 Gauge Galvanized Brad Adhesive 50 1000

Interchange Information

Nails used in the Campbell Hausfeld JB006750 Finishing Nailer will also work in Hitachi NT65A, Paslode 3250-F16, IM250F,

Duo Fast LFN-764, Sears 18321, Porter Cable FN200, FN250 and Campbell Hausfeld NB0064.

www.chpower.com

Air leaking at trigger valve

Air leaking between hous-

ing and nose

Air leaking between hous-

ing and cap

Nailer skips driving nail

Nailer runs slow or has loss

of power

Nails are jammed in nailer

O-Rings in trigger valve housing are

damaged

Loose screws in housing

Damaged O-Rings

Damage to bumper

Loose screws

Damaged gasket

Worn bumper

Dirt in nose piece

Dirt or damage prevent nails or pusher

from moving freely in magazine

Damaged pusher spring

Inadequate air flow to nailer

Worn O-Ring on piston or lack of lubri-

cation

Damaged O-Ring on trigger valve

Air leaks

Cap gasket leaking

Nailer not lubricated sufficiently

Broken spring in cylinder cap

Exhaust port in cap is blocked

Guide on driver is worn

Nails are not correct size

Nails are bent

Magazine or nose screws are loose

Driver is damaged

Replace O-Rings. Check operation of Work Contact

Element (WCE)

Tighten screws

Replace O-Rings

Replace bumper

Tighten screws

Replace gasket

Replace bumper

Clean drive channel

Clean magazine

Replace spring

Check fitting, hose or compressor

Replace and lubricate O-Rings

Replace O-Rings

Tighten screws and fittings

Replace gasket

Lubricate nailer

Replace spring

Replace damaged internal parts

Replace guide

Use only recommended nails

Replace with undamaged nails

Tighten screws

Replace driver

Troubleshooting Guide

Stop using nailer immediately if any of the following problems occur. Serious

personal injury could result. Any repairs or replacements must be done by a Qualified Service

Person or Authorized Service Center.

Problem Cause Solution

Model JB006750

Operating Instructions

www.chpower.com

Notes

Operating Instructions JB006750

www.chpower.com

Limited Warranty

1. DURATION: From the date of purchase by the original purchaser as follows: Campbell Hausfeld – Three (3) Years.

2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive,

Harrison, Ohio, 45030, Telephone: (800) 543-6400

3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the

Campbell Hausfeld product.

4. WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: Any Campbell Hausfeld nailer, stapler, air tool, spray gun, infla-

tor or air accessory supplied or manufactured by Warrantor.

5. WHAT IS COVERED UNDER THIS WARRANTY: Substantial defects in material and workmanship which occur within the

duration of the warranty period.

6. WHAT IS NOT COVERED UNDER THIS WARRANTY:

A. Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED

FROM THE DATE OF ORIGINAL PURCHASE AS STATED IN THE DURATION. If this product is used for commercial,

industrial or rental purposes, the warranty will apply for ninety (90) days from the date of purchase. Some States

do not allow limitation on how long an implied warranty lasts, so the above limitations may not apply to you.

B. ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY

DEFECT, FAILURE, OR MALFUNCTION OF THE CAMPBELL HAUSFELD PRODUCT. Some States do not allow the exclu-

sion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to

you.

C. Any failure that results from an accident, purchaser’s abuse, neglect or failure to operate products in accordance

with instructions provided in the owner’s manual(s) supplied with product. Accident, purchaser's abuse, neglect or

failure to operate products in accordance with instructions shall also include the removal or alteration of any safety

devices. If such safety devices are removed or altered, this warranty is void.

D. Normal adjustments which are explained in the owner’s manual(s) provided with the product.

E. Items or service that are normally required to maintain the product, i.e. o-rings, springs, bumpers, debris shields,

driver blades, fuses, batteries, gaskets, packings or seals, fluid nozzles, needles, sandblast nozzles, lubricants, mate-

rial hoses, filter elements, motor vanes, abrasives, blades, cut-off wheels, chisels, chisel retainers, cutters, collets,

chucks, rivet jaws, screw driver bits, sanding pads, back-up pads, impact mechanism, or any other expendable part

not specifically listed. These items will only be covered for ninety (90) days from date of original purchase.

Underlined items are warranted for defects in material and workmanship only.

F. Cosmetic defects that do not interfere with the product’s function.

7. RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: Repair or replace, at Warrantor’s option, products or com-

ponents which are defective, have malfunctioned and/or failed to conform within duration of the warranty period.

8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:

A. Provide dated proof of purchase and maintenance records.

B. Call Campbell Hausfeld (800-424-8936) to obtain your warranty service options. Freight costs must be borne by the

purchaser.

C. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).

9. WHEN WARRANTOR WILL PERFORM REPAIR OR REPLACEMENT UNDER THIS WARRANTY: Repair or replacement will be

scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability

of replacement parts.

This Limited Warranty applies in the United States, Canada and Mexico only and gives you specific legal rights. You may

also have other rights which vary from state to state or country to country.

MÉMENTO: Gardez votre preuve datée d'achat à fin de la garantie!

Joignez-la à ce manuel ou classez-la dans un dossier pour plus de sécurité.

lieu, d'autre équipement de protec-

tion appropriée tel que de

l'équipement de protection pour la

tête, les oreilles et les pieds. Il

pourrait y avoir de graves lésions

oculaires ou perte auditive.

• S'assurer que l'outil soit conservé en

bon état tel que décrit dans ce

manuel.

• S'assurer du bon entretien de tous

les outils de l'employeur.

• S'assurer que les outils qui doivent

être réparés ne soient plus utilisés

avant leur réparation. Les moyens

de contrôle sont les étiquettes et la

ségrégation physique.

Danger

indique

une situation hasardeuse imminente

qui RÉSULTERA en perte de vie ou

blessures graves.

Table des Matières

Directives de Sécurité . . . . . . . .1-3

Spécifications . . . . . . . . . . . . . . . . 2

Utilisation de la Cloueuse . . . . . 3-6

\Mode d’Emploi . . . . . . . . . . . . . . 4

Guide de Dépannage . . . . . . . . . . 7

Garantie . . . . . . . . . . . . . . . . . . . . 8

Description

Cette cloueuse est conçue pour bois-

eries, moulures intérieures, plinthes,

panneaux et armoires. Caractéristiques:

pratique magasin à chargement dessus

pour un maximum de 100 clous,

embout ne laissant pas de marque,

éjection réglable, gâchette à un coup,

buse à dégagement rapide, réglage de

pénétration des clous.

Généralités sur la

Sécurité

PROPOSITION 65 CALIFORNIE

Vous pouvez créer de la pous-

sière en coupant, ponçant,

perçant ou meulant les

matériaux tels que le bois, la peinture,

le métal, le béton, le ciment ou autre

maçonnerie. Cette poussière contient

souvent des produits chimiques recon-

nus pour causer le cancer, les déforma-

tions congénitales ou autres problèmes

de la reproduction. Portez de

l’équipement de protection.

Ce manuel contient des informations

concernant la sécurité, le fonction-

nement et l’entretien. Contacter votre

représentant Campbell Hausfeld si

vous avez des questions.

RESPONSABILITÉ DE L’UTILISATEUR

L'opérateur de l'outil est responsable de :

• Lire et comprendre les étiquettes et

le manuel sur les outils.

• Choisir un système d'activation de

l'outil approprié en tenant compte

de l'application de travail prévue

pour l'outil.

• L'utilisation sécuritaire de l'outil.

• S'assurer que l'outil

est utilisé seulement

lorsque l'opérateur

et tout autre person-

nel dans l'aire de tra-

vail portent un équipement de pro-

tection oculaire ANSI Z87 et, s'il y a

lieu, d'autre équipement de protec-

tion appropriée tel que de

l'équipement de protection pour la

tête, les oreilles et les pieds. Il

pourrait y avoir de graves lésions

oculaires ou perte auditive.

• S'assurer que l'outil soit conservé en

bon état tel que décrit dans ce

manuel.

RESPONSABILITÉ DE L’EMPLOYEUR

• Choisir un système d'activation de

l'outil approprié en tenant compte

de l'application de travail prévue

pour l'outil.

• S'assurer que ce manuel soit

disponible pour les opérateurs et le

personnel responsable de l'entre-

tien.

• L'utilisation sécuritaire de l'outil.

• S'assurer que l'outil

est utilisé seulement

lorsque l'opérateur

et tout autre person-

nel dans l'aire de tra-

vail portent un équipement de pro-

tection oculaire ANSI Z87 et, s'il y a

Instructions d’Utilisation Modèle JB006750

Cloueuse

Pour Finition

S’il vous plaît lire et conserver ces instructions. Lire attentivement avant de monter, installer, utiliser ou de procéder à l’entretien du produit

décrit. Se protéger ainsi que les autres en observant toutes les instructions de sécurité, sinon, il y a risque de blessure et/ou dégâts matériels!

Conserver ces instructions comme référence.

IN726700AV 7/08

Les Cloueuses Campbell Hausfeld confor-

ment aux/ou dépassent les standards de

l’American National Standard/International

Staple, Nail and Tool Association in

ANSI/ISANTA SNT-101-2002.

Modèle JB006750

Voir la Garantie à la page 8-Fr pour de l’information importante sur l’utilisation commercial de ce produit.

Inscrire ci-dessous le numéro de modèle

et le

code date

se trouvant sur l’ap-

pareil :

Nº du Modèle____________________

Code de date _____________

Conserver ces numéros

comme référence.

1-Fr

Généralités sur la

Sécurité (Suite)

●Lire et comprendre les

étiquettes et le manuel

sur les outils. Ne pas

suivre les avertissements,

les dangers et les mises

en garde pourrait causer la MORT ou

de GRAVES BLESSURES.

●Ne pas utiliser comme

source d'alimentation

tout type de gaz

réactif, y compris,

mais sans s'y limiter,

de l'oxygène et des

gaz combustibles. Utiliser seulement

de l’air comprimé filtré, lubrifié et

réglé. Utiliser un gaz réactif au lieu

d'air comprimé pourrait faire

exploser la cloueuse ce qui pourrait

provoquer des blessures graves

voire la mort.

●Utiliser seulement

une source d'air

comprimé à pression

pour limiter la

pression d'air fournie

à l'outil. La pression

contrôlée ne doit pas dépasser 758

kPa. S'il y a une défaillance du

régulateur, la pression livrée à l'outil

ne doit pas dépasser 1 379 kPa. La

cloueuse pourrait exploser ce qui

pourrait mener à la mort ou à des

blessures graves.

●Ne jamais utiliser de

l’essence ni les flu-

ides inflammables

2-Fr

pour le nettoyage de la cloueuse. Ne

jamais utiliser la cloueuse près d’un

liquide ou gaz inflammable. Une étin-

celle peut allumer les vapeurs et

causer une explosion qui peut résul-

ter en perte de vie ou blessures

graves personnelles.

●Toujours bien s’équili-

brer pendant la manip-

ulation ou l’utilisation

de la cloueuse.

●Ne pas retirer,

modifier ou faire

quoique ce soit

qui pourrait ren-

dre la gâchette ou

le mécanisme de

déclenchement par contact (WCE)

inutilisable. Ne pas faire fonctionner

d'outil qui a été modifié de cette

façon. Cela pourrait mener à la mort

ou à de graves blessures

●Ne toucher à la

gâchette qu’au

moment de

poser des clous.

Ne jamais action-

ner la gâchette

durant le transport de la cloueuse ou

durant le raccordement de celle-ci au

tuyau d’air comprimé. L’éjection acci-

dentelle d’un clou peut causer des

blessures graves ou mortelles.

Avertissement indique une situation

hasardeuse potentielle qui PEUT résul-

ter en perte de vie ou blessures graves.

●Toujours

débrancher l'outil

de la source de

courant en votre

absence, en

effectuant des

réparations ou son entretien, en

débloquant l'appareil ou en le

déplaçant ailleurs. Le raccordement

du tuyau d’air comprimé doit

toujours s’effectuer AVANT le

chargement du magasin. Ne pas

charger l'outil d'attaches lorsque la

gâchette est enfoncée ou lorsque le

mécanisme de déclenchement par

contact (WCE) est engagé. L’éjection

accidentelle d’un clou peut causer des

blessures graves ou mortelles.

●Toujours

installer un

raccord ou un

tuyau de

raccord sur ou

près de l'outil

afin que tout air comprimé de l'outil

soit déchargé au moment où l'on

débranche le raccord ou le boyau.

Ne pas utiliser un clapet ni autre

raccord qui permet que l’air reste

dans la cloueuse. Cela peut entraîner

des blessures graves ou mortelles.

●Ne jamais poser l’em-

bout de clouage sur la

main ou sur toute autre

partie du corps.

L’éjection accidentelle

d’un clou peut causer

des blessures graves ou mortelles.

Modèle JB006750

Instructions d’Utilisation

CAMPBELL

PROFESSIONAL

HAUSFELD

OCO2

758 kPa

Ventilation réglable

Étiquettes

d'avertissement,

spécifications et

nom (dessus et

arrière)

Mécanisme de déclenchement

par contact (WCE)

Pièces Détachées et

Spécifications de la Cloueuse

• EXIGE: 0,02 m3/min avec 10 clous

par minute à 621 kPa

• PRISE D’AIR: 1/4 po NPT

• TAILLES DE CLOUS: 2,54 cm à

6,35 cm (1 po à 2-1/2 po)

• CAPACITÉ DU CHARGEUR:

100 Clous par charge, calibre 16

• POIDS: 2,24 kg

• LONGUEUR: 31,75 cm (12-1/2 po)

• HAUTEUR: 30,16 cm (11-7/8 po)

• PRESSION MAXIMALE: 758 kPa

• GAMME DE PRESSION: 483 - 758 kPa

Roue d'ajustement

de profondeur

Embout

anti-marque

Magazine

(Position ouverte)

Verrou de

Buse à

dégagement

rapide

Verrou du

chargeur

Gâchette

Inhaltsverzeichnis

Sprachen:

Andere Campbell Hausfeld Nagelpistole Handbücher

Campbell Hausfeld

Campbell Hausfeld NS2190 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld IN729000AV Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld NB006401 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld NB0040 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld CHN10401 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld CHN101 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld CHN104 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld NB006750 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld CHN70800 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld CHN70899 Service-Handbuch

Campbell Hausfeld

Campbell Hausfeld IN715703AV Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld IN720501AV Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld CHN70900 Kurzanleitung

Campbell Hausfeld

Campbell Hausfeld CHN50399 Service-Handbuch

Campbell Hausfeld

Campbell Hausfeld SB514000 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld CHN71500 Kurzanleitung

Campbell Hausfeld

Campbell Hausfeld RN164500 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld CHN101 Gebrauchsanweisung

Campbell Hausfeld

Campbell Hausfeld SB3232 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld IronForce IFN102 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld Brad Nailer CHN70200 Service-Handbuch

Campbell Hausfeld

Campbell Hausfeld SB323200 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld NB3565 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld IN715501AV Bedienungsanleitung

Beliebte Nagelpistole Handbücher anderer Marken

Performance Tool

Performance Tool M643 Bedienungsanleitung

Hitachi

Hitachi VH650 - Fencing Nailer, Full Head Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco Fusion Technology F-35XP Bedienungsanleitung

Grizzly

Grizzly G1847 Bedienungsanleitung

Ryobi

Ryobi R18N18G Bedienungsanleitung

Black & Decker

Black & Decker 492848-00 Bedienungsanleitung

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN TN90 Bedienungsanleitung

Metabo HPT

Metabo HPT NR 3690DC Bedienungsanleitung

Surtek

Surtek CN650 Abmessungen und Installationsanleitung

Makita

Makita GF600 Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco AirFree 25 Bedienungsanleitung

Freeman

Freeman P50LSLW Bedienungsanleitung

Aicon PRO

Aicon PRO DAC4507 Bedienungsanleitung

Makita

Makita AN923 Bedienungsanleitung

Grizzly

Grizzly T20644 Bedienungsanleitung

Black & Decker

Black & Decker 90514937 Bedienungsanleitung