Grizzly T20644 Bedienungsanleitung

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#TR10583 PRINTED IN CHINA

MODEL T20644

34º ANGLE FINISH NAILER

INSTRUCTION MANUAL



































 

 

 











T20644 34° Angle Finish Nailer–2½"

-2-

Safety Instructions For Pneumatic Tools

1. KEEP ALL SAFETY DEVICES IN

PLACE and in working order.

2. REMOVE ADJUSTING KEYS AND

WRENCHES. Form habit of check-

ing to see that keys and adjusting

wrenches are removed from tool

before operation.

3. KEEP WORK AREA CLEAN.

Cluttered areas and benches invite

accidents.

4. DO NOT USE IN DANGEROUS

ENVIRONMENT. Do not use pneu-

matic tools in damp or wet locations,

or where any flammable or noxious

fumes may exist. Keep work area

well lighted.

5. KEEP CHILDREN AND VISITORS

AWAY. All children and visitors

should be kept at a safe distance

from work area.

6. MAKE WORKSHOP CHILD PROOF

by locking your shop and shutting off

air valves.

7. DO NOT FORCE TOOL. It will do

the job better and safer at the rate for

which it was designed.

8. USE THE RIGHT TOOL. Do not

force tool or attachment to do a job

for which it was not designed.

9. DO NOT USE UNDER THE

INFLUENCE OF DRUGS OR

ALCOHOL.

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazardous

conditions. This manual uses a series of symbols and signal words which

are intended to convey the level of importance of the safety messages. The

progression of symbols is described below. Remember that safety messages by

themselves do not eliminate danger and are not a substitute for proper accident

prevention measures.

Indicates a potentially hazardous situation which, if

not avoided, MAY result in minor or moderate injury.

It may also be used to alert against unsafe practices.

Indicates a potentially hazardous situation which, if

not avoided, COULD result in death or serious injury.

Indicates an imminently hazardous situation which,

if not avoided, WILL result in death or serious injury.

This symbol is used to alert the user to useful

information about proper operation of the equipment.

SAFETY

NOTICE

T20644 34° Angle Finish Nailer–2½" -3-

10. USE PROPER AIR HOSE for the

tool. Make sure your air hose is in

good condition and is long enough

to reach your work without stretch-

ing.

11. WEAR PROPER APPAREL. Do

not wear loose clothing, gloves,

neckties, rings, bracelets, or other

jewelry which may get caught in

moving parts. Non-slip footwear is

recommended. Wear a protective

hair covering to contain long hair.

12. ALWAYS USE SAFETY GLASSES.

Also use a face or dust mask if cut-

ting operation is dusty. Everyday

eyeglasses only have impact resis-

tant lenses, they are NOT safety

glasses.

13. WEAR APPROVED HEARING

PROTECTION. Air escaping from

pneumatic tools can exceed safe

exposure limits and may cause

hearing damage with prolonged

exposure.

14. SECURE WORK. Use clamps or a

vise to hold work when practical. It

is safer than using your hand and

frees both hands to operate tool.

15. MAINTAIN TOOLS WITH CARE.

Keep tools lubricated and clean

for best and safest performance.

Follow instructions for lubricating

and changing accessories.

16. REDUCE THE RISK OF

UNINTENTIONAL FIRING. Do not

carry tool with hand on trigger and

always disconnect from air when

not in use.

17. DISCONNECT TOOLS before ser-

vicing, changing accessories, or

moving to another location.

18. DO NOT OVERREACH. Keep

proper footing/balance at all times.

19. USE THE RECOMMENDED

ACCESSORIES. Consult owner’s

manual for recommended acces-

sories. The use of improper acces-

sories may cause risk of injury.

20. CHECK FOR DAMAGED PARTS

BEFORE USING. Check for bind-

ing and alignment of parts, broken

parts, part mounting, loose bolts,

and any other conditions that may

affect machine operation. Repair or

replace damaged parts.

21. NEVER LEAVE UNATTENDED

TOOL CONNECTED TO AIR.

Disconnect the air hose and do not

leave tool until it is relieved of any

built up pressure.

22. NEVER ALLOW UNTRAINED

USERS TO USE THIS TOOL

WHILE UNSUPERVISED.

23. IF YOU ARE UNSURE OF THE

INTENDED OPERATION, STOP

USING TOOL. Seek formal training

or research books or magazines

that specialize in pneumatic tools.

24. BE AWARE OF HOSE LOCATION

WHEN USING PNEUMATIC

TOOLS. Hoses can easily become

a tripping hazard when laid across

the floor or spread out in a disorga-

nized fashion.

Safety Instructions For Pneumatic Tools

T20644 34° Angle Finish Nailer–2½"

-4-

Additional Safety Instructions for Nailers

1. HAND INJURIES: Do not place your

hands near the nail point of entry. A

nail can deflect and tear through the

surface of the workpiece, puncturing

your hand or fingers.

2. COMBUSTIBLE GASES: Never con-

nect the nailer to pressurized oxy-

gen or other combustible gases as a

power source. Only use filtered, lubri-

cated, and regulated compressed air.

3. SAFE HANDLING: Never point the

nailer at others! Do not keep the trig-

ger pulled when loading fasteners,

carrying, or holding tool. Carry the

nailer only by the handle, never by

any other part. Do not carry the nailer

by the air hose. Disconnect the nailer

from the air hose when going up and

down ladders.

4. MODIFICATIONS: DO NOT modify

this tool or bypass the safety nose

mechanism.

5. CHECK VALVE: Do not use a check

valve or any other fitting that allows

air to remain in the tool.

6. HOSE USAGE: Make sure your air

hose is designed for the tool in use, is

in good condition, and is long enough

to reach your work without stretching.

However, an overly long air hose in

the work area may be a tripping haz-

ard if not kept out of the way.

7. OPERATING QUESTIONS: If you

are not sure about the intended oper-

ation, stop using the nailer. Seek

formal training.

8. CLEANING: Never use gasoline or

other flammable liquids to clean the

nailer; vapors in the nailer will ignite

by a spark and cause it to explode.

9. MAINTENANCE: Always disconnect

air from the nailer when servicing or

installing nails. During maintenance,

a nailer connected to air may fire acci-

dentally, causing serious personal

injury.

10. COMPRESSED AIR RATING: Do

not connect the nailer to compressed

air that exceeds 120 PSI.

T20644 34° Angle Finish Nailer–2½" -5-

Never point this nailer at yourself or

another person! Always pay attention

to the direction this nailer is pointed.

Use this tool with respect and caution

to lessen the possibility of operator or

bystander injury. Ignoring this warning

may result in serious personal injury.

Operating this nailer can propel

objects into the air, causing imme-

diate eye damage. To protect your-

self, always wear American National

Standards Institute (ANSI) approved

safety glasses or goggles when oper-

ating this equipment. In addition, this

nailer discharges at up to 85-90 deci-

bels. To protect your hearing, always

wear ANSI approved ear protection

when operating this nailer.

Read the manual before operation.

Become familiar with this nailer, its

safety instructions, and its operation

before beginning any work. Serious

personal injury may result if safety or

operational information is not under-

stood or followed.

Nailer accidents routinely happen

while moving the gun to another

location, such as up ladders, to

another room, or even another job

site. Always disconnect the gun

immediately after use and never

transport the gun while connected to

the air—even if the air compressor is

disconnected from its power source!

No list of safety guidelines can be

complete. Every shop environment

is different. Always consider safety

first, as it applies to your individu-

al working conditions. Use this and

other tools with caution and respect.

Failure to do so could result in seri-

ous personal injury, damage to equip-

ment or poor work results.

T20644 34° Angle Finish Nailer–2½"

-6-

INTRODUCTION

If you have any comments regarding this

manual, please contact us:

Grizzly Industrial, Inc.

C/O Technical Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069

Email: [email protected]

Most importantly, we stand behind our

tools. If you have any service questions or

parts requests, please call or write us at

the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: [email protected]

Web Site: http://www.grizzly.com

We are proud to offer the Grizzly Model

T20644 34º Angle Finish Nailer–2½". This

model is part of a growing Grizzly family of

fine pneumatic tools. When used accord-

ing to the guidelines set forth in this man-

ual, you can expect years of trouble-free,

enjoyable operation and proof of Grizzly’s

commitment to customer satisfaction.

The specifications, details, and photo-

graphs in this manual represent the Model

T20644 as supplied when the manual was

prepared. However, owing to Grizzly’s pol-

icy of continuous improvement, changes

may be made at any time with no obliga-

tion on the part of Grizzly.

Foreword Contact Info

Nailer Specifications

Nail Size .....................15 gauge ﬁnish nails

Nail Length ....................................1¼"-2½"

Magazine Capacity ................................. 80

Air Inlet ...........................................¼" NPT

Weight ................................................5 lbs.

Operating Pressure .................. 60-100 PSI

Max Operating Pressure ................ 120 PSI

Functional Description

The Model T20644 is designed to toenail

into corners and shoot at any angle. This

nailer is ideal for door, window, exterior,

and decorative trim, cabinet work, and fin-

ish paneling. The Model T20644 features

a 360° exhaust port, comfort grip rubber

handle, economical air consumption with

low noise, narrow nose for tight spots, and

quick jam release mechanism.

T20644 34° Angle Finish Nailer–2½" -7-

SETUP

Your Model T20644 left our warehouse

in a carefully packed box. If you discover

the nailer is damaged after you have

signed for delivery, please immediately

call Customer Service at (570) 546-9663

for advice.

Save the containers and all packing mate-

rials for possible inspection by the ship-

ping company. (Otherwise, filing a claim

can be difficult.) When you are completely

satisfied with the condition of the ship-

ment, inventory the equipment.

After you remove the nailer case from the

box you should find the following.

Model T20644 Inventory (Figure 1)

A. 34° Finish Nailer−2½ ......................... 1

B. Safety Goggles .................................. 1

C. Oil ....................................................... 1

D. Hex Wrench 3, 4, 5mm ............. 1 Each

E. Case ................................................... 1

Figure 1. Model T20644 inventory.

InventoryUnpacking

T20644 34° Angle Finish Nailer–2½"

-8-

The Model T20644 is designed to be oper-

ated at 60-100 PSI using clean, dry, regu-

lated, compressed air. DO NOT exceed

the 120 PSI maximum operating pres-

sure for your model.

Before using your new nailer, regulate the

air pressure to find the optimum setting

within the specified operating range. Start

by testing the nailer at a low setting, then

increase the air pressure as needed for

satisfactory results.

An in-line filter/lubricator/regulator unit can

be installed, as depicted in Figure 2.

This filter/lubricator/regulator unit will

protect your tool from damaging water

build-up, allow you to adjust and maintain

constant air pressure to your tool, and

save you the inconvenience of having to

manually lubricate your tool every time

you use it.

Quick

Connector

Quick

Coupler

Air Hose Quick

Coupler

Quick

Connector

Lubricator

Filter

Regulator

Air

Compressor

Your

Tool

Figure 2. Typical filter/lubricator/regulator installation order.

Compressed Air

System

Check the current Grizzly catalog for avail-

ability of this unit. If you plan on install-

ing a filter/lubricator/regulator unit in your

compressed air system, always follow the

connection instructions that come with

the unit.

Exceeding the maximum permissible

operating pressure may damage the

nailer and cause it to malfunction. To

reduce your risk of personal injury,

DO NOT allow the air pressure to

exceed the recommended pressure

for this nailer!

T20644 34° Angle Finish Nailer–2½" -9-

Safety Yoke

A safety yoke mechanism on the nose

of the nailer acts as a secondary safety

device. When the trigger is pressed, the

nailer will not fire until the safety yoke

mechanism is depressed.

Before you use your nailer for the first

time, check the safety yoke mechanism to

ensure proper function. To do this:

1. DISCONNECT NAILER FROM THE

AIR SUPPLY!

2. Make sure the magazine is empty and

contains no nails.

3. Make sure the trigger and the safety

yoke mechanism move up and down

without sticking.

4. Connect the nailer to the air supply.

5. Without pressing the trigger, depress

the safety yoke mechanism against a

scrap piece of wood that is clean and

free of any knots, nails, or other foreign

objects.

— If the nailer does not fire, then the

safety yoke mechanism is working

correctly.

— If the nailer does fire when you

do this, immediately disconnect the

nailer from the air supply and call

Grizzly Technical Support at (570)

546-9663 for help.

— If the nailer fires when the trigger

is pulled without the safety yoke

mechanism being depressed, then

the nailer is not working properly.

— If either of these conditions develop

after you have used your nailer for a

period of time, check the lubrication

of these mechanisms.

The safety yoke is a mechanical

device that can fail. Never rely on the

safety yoke mechanism as an excuse

to point the nailer at yourself or any

bystanders. Serious injury may occur.

DO NOT attempt to modify or bypass

the safety yoke mechanism to make

the nailer fire without pushing the

safety yoke down.

Inhaltsverzeichnis

Andere Grizzly Nagelpistole Handbücher

Grizzly

Grizzly H8235 Bedienungsanleitung

Grizzly

Grizzly H7664 Kurzanleitung

Grizzly

Grizzly G9248 Bedienungsanleitung

Grizzly

Grizzly H7679 Bedienungsanleitung

Grizzly

Grizzly H7679 Betriebsanleitung

Grizzly

Grizzly H6141 Bedienungsanleitung

Grizzly

Grizzly H7664 Bedienungsanleitung

Grizzly

Grizzly G3690 Bedienungsanleitung

Grizzly

Grizzly H5570 Bedienungsanleitung

Grizzly

Grizzly H8233 Bedienungsanleitung

Grizzly

Grizzly H2911 Bedienungsanleitung

Grizzly

Grizzly H5570 Bedienungsanleitung

Grizzly

Grizzly T27338 Bedienungsanleitung

Grizzly

Grizzly H6145 Bedienungsanleitung

Grizzly

Grizzly T21347 Bedienungsanleitung

Grizzly

Grizzly H6144 Bedienungsanleitung

Grizzly

Grizzly H2912 Bedienungsanleitung

Grizzly

Grizzly G6045 Bedienungsanleitung

Grizzly

Grizzly H8232 Bedienungsanleitung

Grizzly

Grizzly H7665 Bedienungsanleitung

Grizzly

Grizzly H5571 Bedienungsanleitung

Grizzly

Grizzly G6045 Bedienungsanleitung

Grizzly

Grizzly H7826 Bedienungsanleitung

Grizzly

Grizzly H2910 Bedienungsanleitung

Beliebte Nagelpistole Handbücher anderer Marken

Performance Tool

Performance Tool M643 Bedienungsanleitung

Hitachi

Hitachi VH650 - Fencing Nailer, Full Head Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco Fusion Technology F-35XP Bedienungsanleitung

Ryobi

Ryobi R18N18G Bedienungsanleitung

Black & Decker

Black & Decker 492848-00 Bedienungsanleitung

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN TN90 Bedienungsanleitung

Metabo HPT

Metabo HPT NR 3690DC Bedienungsanleitung

Surtek

Surtek CN650 Abmessungen und Installationsanleitung

Makita

Makita GF600 Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco AirFree 25 Bedienungsanleitung

Freeman

Freeman P50LSLW Bedienungsanleitung

Aicon PRO

Aicon PRO DAC4507 Bedienungsanleitung

DAJ

DAJ XR150A Bedienungsanleitung

Makita

Makita AN923 Bedienungsanleitung

Black & Decker

Black & Decker 90514937 Bedienungsanleitung

Alfamacchine

Alfamacchine Minigraf 4 Handbuch