Campbell Hausfeld NB004200 Bedienungsanleitung

Description

This nailer is designed for decorative trim,

molding, window casings, furniture trim

and picture frame assembly. Features

include: convenient side loading

magazine which holds up to 100 nails, an

adjustable exhaust , a sequential trigger,

and a quick clear nose.

General Safety

Information

CALIFORNIA PROPOSITION 65

You can create dust when

you cut, sand, drill or grind

materials such as wood,

paint, metal, concrete, cement, or other

masonry. This dust often contains

chemicals known to cause cancer, birth

defects, or other reproductive harm.

Wear protective gear.

Excessive

exposure

to vibration, working in awkward

positions and repetitive work motions can

cause injury to hands and arms. Stop using

any tool if discomfort, numbness, tingling

or pain occur and consult a physician.

This manual contains safety,

operational and maintenance

information. Contact your Campbell

Hausfeld representative if you have any

questions.

OPERATOR’S RESPONSIBILITY:

The tool operator is responsible for:

Reading and understanding tool

labels and manual.

Selecting an appropriate tool

actuation system, taking into

consideration the work application

for which the tool is used.

The safe use of the tool.

Ensuring that the

tool is used only

when the operator

and all other

personnel in the

work area are wearing ANSI Z87 eye

protection equipment, and when

required, other appropriate

protection equipment such as head,

hearing and foot protection

equipment. Serious eye or

permanent hearing loss could result.

Assuring that the tool is kept in safe

working order as described in this

manual.

EMPLOYER’S RESPONSIBILITY:

Selecting an appropriate tool

actuation system, taking into

consideration the work application

for which the tool is used.

Ensuring that this manual is

available to operators and

personnel performing maintenance.

The safe use of the tool.

Enforcing that the

tool is used only

when the operator

and all other

personnel in the

work area are wearing ANSI Z87 eye

protection equipment, and when

required, other appropriate

protection equipment such as head,

hearing and foot protection

equipment. Serious eye or

permanent hearing loss could

result.

Assuring that the tool is kept in safe

working order as described in this

manual.

Assuring the proper maintenance of

all tools in employer’s possession.

Brad Nailer

Model NB004200

Table Of Contents

General Safety . . . . . . . . . . . . . . . 1-3

Specifications . . . . . . . . . . . . . . . . . . .2

Operating the Nailer . . . . . . . . . . 3-5

Contact Trip Safety Mechanism . . . 4

Fasteners . . . . . . . . . . . . . . . . . . . . . . 6

Troubleshooting . . . . . . . . . . . . . . . . 6

Warranty . . . . . . . . . . . . . . . . . . . . . . 8

Locate model and serial number

on tool and record below:

Model No. ________________________

Serial No. _________________________

Retain these numbers for

future reference.

Operating Instructions Model NB004200

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death

and/or property damage! Retain instructions for future reference.

See Warranty on page 8 for important information about commercial use of this product.

IN725500AV 2/08

Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American National

Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2004.

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

For parts, product & service information

visit www.chpower.com

Always

disconnect the

tool from the

power source

when

unattended,

performing any maintenance or

repair, clearing a jam, or moving the

tool to a new location. Always

reconnect the air line BEFORE

loading any fasteners. Do not load

the tool with fasteners when either

the trigger is depressed or the Work

Contact Element (WCE) is engaged.

The tool could eject a fastener

causing death or serious personal

injury.

Always fit tool

with a fitting

or hose

coupling on or

near the tool in

such a manner

that all compressed air in the tool is

discharged at the time the fitting or

hose coupling is disconnected. Do

not use a check valve or any other

fitting which allows air to remain in

the tool. Death or serious personal

injury could occur.

Never place hands or

any other body parts

in the fastener

discharge area of the

tool. The tool might

eject a fastener and

could result in death or serious

personal injury.

Never use gasoline

or other flammable

liquids to clean the

tool. Never use the

tool in the presence

of flammable liquids or gases.

Vapors could ignite by a spark and

cause an explosion which will result

in death or serious personal injury.

Always remain in

a firmly balanced

position when

using or handling

the tool.

Do not remove,

tamper with, or

otherwise cause

the Work Contact

Element (WCE) or

trigger to become

inoperable. Do not operate any tool

which has been modified in a like

fashion. Death or serious personal

injury could result.

Do not touch the

trigger unless

driving fasteners.

Never attach air

line to tool or

carry tool while

touching the

trigger. The tool could eject a

fastener which will result in death

or serious personal injury.

Warning

indicates

a potentially hazardous situation

which, if not avoided, COULD result in

death or serious injury.

General Safety

Information (Continued)

Ensuring that tools which require

repair are not further used before

repair. Tags and physical

segregation are recommended

means of control.

Danger

indicates

an imminently hazardous situation

which, if not avoided, WILL result in

death or serious injury.

Read and understand

tool labels and manual.

Failure to follow

warnings, dangers, and

cautions could result in

DEATH or SERIOUS

INJURY.

Do not use any type

of reactive gases,

including, but not

limited to, oxygen

and combustible

gases, as a power

source. Use filtered, lubricated,

regulated compressed air only. Use

of a reactive gas instead of

compressed air may cause the tool

to explode which will cause death or

serious personal injury.

Use only a pressure-

regulated

compressed air

source to limit the air

pressure supplied to

the tool. The

regulated pressure must not exceed

100 psi. If the regulator fails, the

pressure delivered to the tool must

not exceed 200 psi. The tool could

explode which will cause death or

serious personal injury.

Magazine

Trigger

Nailer Components And Specifications

Model NB004200

Operating Instructions

• REQUIRES: 1.3 SCFM with 10

nails per minute @ 90 psi

• AIR INLET: 1/4 inch NPT

• NAIL SIZE RANGE: 3/8 inch to 2

inch

• MAGAZINE CAPACITY:

100 Nails per load, 18 gauge

• WEIGHT: 3 lbs., 7 oz.

• LENGTH: 10 1⁄8inch

• HEIGHT: 9 1⁄2inch

• MAXIMUM PRESSURE: 100 psi

• PRESSURE RANGE: 60-100 psi

Nail Discharge Area

Nail Loading Area

Adjustable

Exhaust

Work Contact

Element (WCE)

Reload Indicator

CAMPBELL

PROFESSIONAL

HAUSFELD

100 psi

MAX.

Quick Clear

Nose

Adjustable

Depth

Control

Magazine

Latch

Button

OCO2

www.chpower.com

1. Disconnect the

air supply from

the nailer to add

lubricant.

2. Turn the nailer

so the air inlet is

facing up. Place

4-5 drops of 30

W non-

detergent oil

into air inlet.

Do not use

detergent oils,

oil additives, or air tool oils. Air tool

oils contain solvents which will

damage the nailer's internal

components.

3. After adding

oil, run nailer

briefly. Wipe

off any excess

oil from the

cap exhaust.

RECOMMENDED HOOKUP

Please refer to Airtool Setup

(IN170102AV) for system hookup

instructions.

1. The air

compressor

must be able

to maintain a

minimum of

60 psi when

the nailer is

being used. An inadequate air

supply can cause a loss of power

and inconsistent driving.

2. An oiler can be used

to provide oil

circulation through

the nailer. A filter

can be used to

remove liquid and

solid impurities which

can rust or “gum up”

internal parts of the nailer.

3. Use 3/8 inch

air hoses with

a minimum

working

pressure of

150 psi. Use 1/2 inch air hoses for 50

foot run or longer. For better

performance, install a 3/8 inch quick

plug (1/4 inch NPT threads) with an

inside diameter of .315 inch (8mm)

on the nailer and a 3/8 inch quick

coupler on the air hose.

4. Use a pressure regulator on the

compressor, with an operating

pressure of 0 -125 psi. A pressure

regulator is required to control the

operating pressure of the nailer

between 60 and 100 psi.

Always check

that the Work

Contact

Element (WCE)

is operating

properly. A

fastener could

accidentally be

driven if the WCE is not working

properly. Personal injury may occur

(See "Checking the Work Contact

Element" Section).

Disconnect air supply and release

tension from the pusher before

attempting to clear jams because

tools can be ejected from the front

of the tool. Personal injury may

occur.

Notice

indicates

important information, that if not

followed, MAY cause damage to

equipment.

Avoid using the tool when the

magazine is empty. Accelerated

wear on the tool may occur.

Clean and check all air supply hoses

and fittings before connecting the

tool to an air supply. Replace any

damaged or worn hoses or fittings.

Tool performance or durability may

be reduced.

Air compressors providing air to the

tool should follow the requirements

established by the American

National Standards Institute

Standard B19.3-1991; Safety

Standard for Compressors for

Process Industries. Contact your air

compressor manufacturer for

information.

Operating The Nailer

Read this manual and understand all

safety warnings and instructions before

operating the nailer.

LUBRICATION

This nailer requires lubrication before

using the nailer for the first time and

before each use. If an inline oiler is

used, manual lubrication through the

air inlet is not required on a daily basis.

The work

surface

can become damaged by excessive

lubrication. Proper lubrication is the

owner’s responsibility. Failure to

lubricate the nailer properly will

dramatically shorten the life of the

nailer and void the warranty.

General Safety

Information (Continued)

Never carry the

tool by the air

hose or pull the

hose to move the

tool or a

compressor. Keep

hoses away from

heat, oil and sharp edges. Replace

any hose that is damaged, weak or

worn. Personal injury or tool

damage could occur.

Always assume the tool contains

fasteners. Respect the tool as a

working implement; no horseplay.

Always keep others at a safe

distance from the work area in case

of accidental discharge of fasteners.

Do not point the tool toward

yourself or anyone whether it

contains fasteners or not. Accidental

triggering of the tool could result in

death or serious personal injury.

Do not drive a

fastener on top

of other

fasteners. The

fastener could

glance and cause

death or a serious

puncture wound.

Do not operate

or allow anyone

else to operate

the tool if any

warnings or

warning labels

are not legible.

Warnings or warning labels are

located on the tool magazine and

body.

Do not drop or throw the tool.

Dropping or throwing the tool can

result in damage that will make the

tool unusable or unsafe. If the tool

has been dropped or thrown,

examine the tool closely for bent,

cracked or broken parts and air

leaks. STOP and repair before using

or serious injury could occur.

Caution

indicates

a potentially hazardous situation

which, if not avoided, MAY result in

minor or moderate injury.

Do not make any modifications to the

tool without first obtaining written

approval from Campbell Hausfeld. Do

not use the tool if any shields or

guards are removed or altered. Do

not use the tool as a hammer.

Personal injury or tool

damage may occur.

OIL

60 psi

Min.

100 psi

Max.

Model NB004200

Operating Instructions

3www.chpower.com

O I L

!WARNING

3. Insert a stick

of Campbell

Hausfeld nails

or equivalent

(see

"Fasteners"

section) into

the magazine. Make sure the

pointed ends of the nails are resting

on the bottom ledge of the

magazine when loading. Make sure

the nails are not dirty or damaged.

4. Push the

magazine

cover

forward

until the

latch catches.

5. Always unload all fasteners before

removing tool from service.

Unloading is the reverse of loading,

except always disconnect the air

supply before unloading.

ADJUSTING THE NAIL PENETRATION

The nailer is equipped with an

adjustable depth of drive feature. This

allows the user to determine how deep a

fastener will be driven into the work

surface.

1. Adjust operating pressure so nails

are driven consistently. Do not

exceed 100 psi.

2. To drive the nail shallower, turn the

wheel (C) to right to the extent

desired.

3. To sink a nail deeper, turn the wheel

4. Make sure trigger and work contact

element (WCE) move freely up and

down without binding or sticking

after each adjustment.

4. Reconnect air

supply to the

nailer.

5. Depress the Work

Contact Element

(WCE) against the

work surface

without pulling

the trigger. The

nailer MUST NOT

OPERATE. Do not use the tool if it

operates without pulling the trigger.

Personal injury may result.

6. Remove nailer

from work

surface. The

Work Contact

Element (WCE)

must return to

its original

down position. Pull the trigger. The

nailer MUST NOT OPERATE. Do not

use the tool if it operates while lifted

from the work surface. Personal

injury may result.

7. Pull the

trigger and

depress the

Work

Contact

Element

(WCE) against the work surface. The

nailer MUST NOT OPERATE.

8. Depress

the Work

Contact

Element

(WCE)

against

work surface. Pull the trigger. The

nailer MUST OPERATE.

LOADING/UNLOADING THE NAILER

1. Always connect

the tool to the

air supply

before loading

fasteners.

2. Press down on

latch and pull

back on the

magazine

cover.

Operating The Nailer

(Continued)

Sequential Trip Safety

Mechanism

The tool is equipped with a sequential

trip safety mechanism. When the

operator depresses the Work Contact

Element (WCE) against the work

surface and then pulls the trigger, a

fastener will be driven.

OPERATING A SEQUENTIAL TRIP

TOOL

1. Release

trigger and

place nose of

tool against

work surface.

2. Depress the

Work contact

element (WCE)

against the

work surface

and pull the

trigger to

drive a fastener.

3. Release the

trigger and

lift the tool

from the work

surface after

each fastener

is driven.

CHECKING THE WORK CONTACT

ELEMENT (WCE)

Check the

opertion

of the Work Contact Element (WCE) trip

mechanism before each use. The WCE

must move freely without binding

through its entire travel distance. The

WCE spring must return the WCE to its

fully extended position after being

depressed. Do not operate the nailer if

the WCE trip mechanism is not operating

properly. Personal injury may occur.

1. Disconnect the

air supply from

the nailer.

2. Remove all nails from the magazine

(see Loading/ Unloading The

Nailer).

Make sure the

trigger and work

contact element

(WCE) move freely

up and down

without sticking or

binding.

Model NB004200

Operating Instructions

www.chpower.com

(C)

Operating The Nailer

(Continued)

ADJUSTING THE DIRECTION OF THE

EXHAUST

The NB004200 is

equipped with an

adjustable

direction exhaust

deflector. This is

intended to allow

the user to change the direction of the

exhaust. Simply twist the deflector to

any direction desired.

CLEARING A JAM FROM THE NAILER

1. Disconnect the

air supply from

the nailer.

2. Remove all

nails from the

magazine (see

"Loading/

Unloading

The Nailer").

Failure to do so

will cause the nails to eject from the

front of the nailer.

3. Undo latch by

pulling out

and down.

The wire latch

will disengage

from the

hooks on the

nose.

4. The door can

now be

rotated

exposing the

jammed

fastener.

5. Remove the

jammed

fastener, using

pliers or a

screwdriver if

required.

6. Rotate door back

into the closed

position.

7. Extend the wire

latch and place

over the hooks

on the nose.

8. Close the latch

by pushing the

latch up and in

until the latch

snaps into place.

9. Make sure the

trigger and work

contact element

(WCE) move

freely up and

down without

sticking or binding.

Maintenance

TECHNICAL SUPPORT

Please call our Nailer hotline at

1-800-543-6400 with any questions

regarding the operation or repair of this

nailer.

Fasteners and Replacement

Parts

Use

genuine

Campbell Hausfeld 18 gauge fasteners (or

equivalent - See "Fastener Interchange

Information"). Use only genuine

Campbell Hausfeld replacement parts.

Never substitute parts. Do not use

modified parts or parts which will not

provide equivalent performance to the

original equipment. Tool performance,

safety, and durability could be reduced.

When ordering parts or fasteners, specify

by part number.

Tool Repair

Only qualified personnel should repair

the tool, and they should use genuine

Campbell Hausfeld replacement parts

and accessories, or parts and accessories

which perform equivalently.

Assembly Procedure For Seals

When repairing a nailer, the internal

parts must be cleaned and lubricated.

Parker O-lube or equivalent must be used

on all o-rings. Each o-ring must be

coated with O-lube before assembling.

A small amount of oil must be used on all

moving surfaces and pivots. After

reassembling, a few drops of 30W non-

detergent oil or equivalent, must be

added through the air line before

testing.

Rotate

Model NB004200

Operating Instructions

5www.chpower.com

Shank Nails Per Nails Per

Model # Length Gauge Finish Head Collation Stick Box

FB180016AV 5/8 inch 18 Gauge Galvanized Brad /Brown Adhesive 100 1000

FB180025AV 1 inch 18 Gauge Galvanized Brad /Brown Adhesive 100 1000

FB180030AV 1-1/4 inch 18 Gauge Galvanized Brad /Brown Adhesive 100 1000

FB180040AV 1-1/2 inch 18 Gauge Galvanized Brad /Brown Adhesive 100 1000

FB180050AV 2 inch 18 Gauge Galvanized Brad /Brown Adhesive 100 1000

Fasteners

The following Campbell Hausfeld brad nails are available at local retail stores. For help locating any item, call customer ser-

vice at 1-800-543-6400. Campbell Hausfeld nails meet or exceed ASTM Standard F1667.

Interchange Information

Nails used in the NB004200 Brad Nailer will also work in: Bostitch T31-1, T29-30, BT-35, BT50, Duofast BB4440, Hitachi NT45A,

Paslode 2138-F40 , Porter Cable BN125, BN200, Sears 18409, 18424, and Senco SLP20, LS2, LS5.

Troubleshooting Guide

Stop using nailer immediately if any of the following problems occur. Serious personal injury

could result. Any repairs or replacements must be done by a Qualified Service Person or

Authorized Service Center.

Symptom Possible Cause(s) Corrective Action

Air leaking at trigger valve area O-Rings in trigger valve housing are damaged Replace O-Rings. Check operation of Work Contact

Element (WCE)

Air leaking between housing Loose screws in housing Tighten screws

and nose Damaged O-Rings Replace and lubricate O-rings

Damage to bumper Replace bumper

Air leaking between housing Loose screws Tighten screws

and cap

Nailer skips driving nail Worn bumper Replace bumper

Dirt in nose piece Clean drive channel

Dirt or damage prevent nails or pusher from Clean and check magazine

moving freely in magazine

Damaged pusher spring Replace spring

Inadequate air flow to nailer Check fitting, hose or compressor

Worn O-Ring on piston etc. Replace and lubricate O-rings

Damaged O-Ring on trigger valve Replace and lubricate O-rings

Air leaks Tighten screws and fittings

Cap gasket leaking Replace gasket

Nailer runs slow or has loss of power Nailer not lubricated sufficiently Lubricate nailer

Broken spring in cylinder cap Replace Spring

Exhaust port in cap is blocked Replace any damaged internal parts

Nails are jammed in nailer Guide on driver is worn Replace guide

Nails are not correct size Use only recommended nails

Nails are bent Replace with undamaged nails

Magazine or nose screws are loose Tighten screws

Driver is damaged Replace driver

Nails loaded incorrectly Review Loading/Unloading section in this manual

Air leaking at trigger valve stem O-Rings or seals are damaged Replace O-Rings or seals

Model NB004200

Operating Instructions

www.chpower.com

Model NB004200

Operating Instructions

7www.chpower.com

Notes

Limited Warranty

1. DURATION: From the date of purchase by the original purchaser as follows: – One (1) Year.

2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive,

Harrison, Ohio, 45030, Telephone: (800) 543-6400

3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the

Campbell Hausfeld product.

4. WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: Any Campbell Hausfeld nailer, stapler, air tool, spray gun,

inflator or air accessory supplied or manufactured by Warrantor.

5. WHAT IS COVERED UNDER THIS WARRANTY: Substantial defects in material and workmanship which occur within the

duration of the warranty period.

6. WHAT IS NOT COVERED UNDER THIS WARRANTY:

A. Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED

FROM THE DATE OF ORIGINAL PURCHASE AS STATED IN THE DURATION. If this product is used for commercial,

industrial or rental purposes, the warranty will apply for ninety (90) days from the date of purchase. Some States

do not allow limitation on how long an implied warranty lasts, so the above limitations may not apply to you.

B. ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY

DEFECT, FAILURE, OR MALFUNCTION OF THE CAMPBELL HAUSFELD PRODUCT. Some States do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply

to you.

C. Any failure that results from an accident, purchaser’s abuse, neglect or failure to operate products in accordance

with instructions provided in the owner’s manual(s) supplied with product. Accident, purchaser's abuse, neglect or

failure to operate products in accordance with instructions shall also include the removal or alteration of any safety

devices. If such safety devices are removed or altered, this warranty is void.

D. Normal adjustments which are explained in the owner’s manual(s) provided with the product.

E. Items or service that are normally required to maintain the product, i.e. o-rings, springs, bumpers, debris shields,

driver blades, fuses, batteries, gaskets, packings or seals, fluid nozzles, needles, sandblast nozzles, lubricants,

material hoses, filter elements, motor vanes, abrasives, blades, cut-off wheels, chisels, chisel retainers, cutters,

collets, chucks, rivet jaws, screw driver bits, sanding pads, back-up pads, impact mechanism, or any other

expendable part not specifically listed. These items will only be covered for ninety (90) days from date of original

purchase. Underlined items are warranted for defects in material and workmanship only.

F. Cosmetic defects that do not interfere with the product’s function.

7. RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: Repair or replace, at Warrantor’s option, products or

components which are defective, have malfunctioned and/or failed to conform within duration of the warranty period.

8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:

A. Provide dated proof of purchase and maintenance records.

B. Call Campbell Hausfeld (800-543-6400) to obtain your warranty service options. Freight costs must be borne by the

purchaser.

C. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).

9. WHEN WARRANTOR WILL PERFORM REPAIR OR REPLACEMENT UNDER THIS WARRANTY: Repair or replacement will be

scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability

of replacement parts.

This Limited Warranty applies in the United States, Canada and Mexico only and gives you specific legal rights. You may

also have other rights which vary from state to state or country to country.

Model NB004200

Operating Instructions

www.chpower.com

RESPONSABILITÉ DE L’EMPLOYEUR

• Choisir un système d'activation de

l'outil approprié en tenant compte

de l'application de travail prévue

pour l'outil.

• S'assurer que ce manuel soit

disponible pour les opérateurs et le

personnel responsable de

l'entretien.

• L'utilisation sécuritaire de l'outil.

• S'assurer que l'outil

est utilisé seulement

lorsque l'opérateur

et tout autre

personnel dans l'aire

de travail portent un équipement

de protection oculaire ANSI Z87 et,

s'il y a lieu, d'autre équipement de

protection appropriée tel que de

l'équipement de protection pour la

tête, les oreilles et les pieds.

Toute

exposition excessive aux vibrations, tout

travail dans des positions incommodes et

tous déplacements à répétition peuvent

causer des blessures aux mains et aux

bras. Cesser d’utiliser tout outil s’il y a

malaise, engourdissement,

fourmillement ou douleur et consulter un

médecin.

Ce manuel contient des informations

concernant la sécurité, le

fonctionnement et l’entretien.

Contacter votre représentant Campbell

Hausfeld si vous avez des questions.

RESPONSABILITÉ DE L’UTILISATEUR

L'opérateur de l'outil est responsable de :

• Lire et comprendre les étiquettes et

le manuel sur les outils.

• Choisir un système d'activation de

l'outil approprié en tenant compte

de l'application de travail prévue

pour l'outil.

• L'utilisation sécuritaire de l'outil.

• S'assurer que l'outil

est utilisé seulement

lorsque l'opérateur

et tout autre

personnel dans l'aire

de travail portent un équipement

de protection oculaire ANSI Z87 et,

s'il y a lieu, d'autre équipement de

protection appropriée tel que de

l'équipement de protection pour la

tête, les oreilles et les pieds. Il

pourrait y avoir de graves lésions

oculaires ou perte auditive.

• S'assurer que l'outil soit conservé en

bon état tel que décrit dans ce

manuel.

Description

Cette cloueuse est conçue pour les

boiseries decoratives, moulures,

encadre-ments de fenêtres, moulures

de meubles et cadres. Les

caractéristiques comprennent:

chargeur de bord pratique avec

capacité de 100 clous, échappement

réglable avec silencieux, gâchette

déclenchement par contact, et une

buse à dégagement rapide.

Généralités sur la

Sécurité

PROPOSITION 65 CALIFORNIE

Vous pouvez créer de la

poussière en coupant,

ponçant, perçant ou meulant

les matériaux tels que le bois, la

peinture, le métal, le béton, le ciment

ou autre maçonnerie. Cette poussière

contient souvent des produits

chimiques reconnus pour causer le

cancer, les déformations congénitales

ou autres problèmes de la reproduction.

Portez de l’équipement de protection.

Cloueuse Á

Clous Sans Tête

Instructions D’Utilisation Modèle NB004200

S’il vous plaît lire et conserver ces instructions. Lire attentivement avant de monter, installer, utiliser ou de procéder à l’entretien du produit

décrit. Se protéger ainsi que les autres en observant toutes les instructions de sécurité, sinon, il y a risque de blessure et/ou dégâts matériels!

Conserver ces instructions comme référence.

Voir la Garantie à la page 16 pour de l’information importante sur l’utilisation commercial de ce produit.

IN725500AV 2/08

Les Cloueuses Campbell Hausfeld conforment aux/ou dépassent les standards de l’American National

Standard/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2004.

MÉMENTO: Gardez votre preuve datée d'achat à fin de la garantie!

Joignez-la à ce manuel ou classez-la dans un dossier pour plus de sécurité.

9Fr

Modèle NB004200

Inscrire ci-dessous le numéro de modèle

et le numéro de série se trouvant sur

l’appareil:

Nº du Modèle _____________________

Nº de Série ________________________

Conserver ces numéros

comme référence.

Table Des Matières

Généralités Sur La Sécurité . . 9 -11

Spécifications . . . . . . . . . . . . . . . . . 10

Utilisation De la Cloueuse . . 11- 13

Mecanisme de Surete a

d’Clenchement par Contact . . . . 12

Attaches . . . . . . . . . . . . . . . . . . . . . 14

Guide de Dépannage . . . . . . . . . . 15

Garantie . . . . . . . . . . . . . . . . . . . . . 16

Ne toucher à la

gâchette qu’au

moment de poser

des attaches. Ne

jamais actionner la

gâchette durant le

transport de l’outil ou durant le

raccordement de celle-ci au tuyau

d’air comprimé. L’éjection

accidentelle d’une attache peut

causer des blessures graves ou

mortelles.

Avertissement indique une situation

hasardeuse potentielle qui PEUT

résulter en perte de vie ou blessures

graves.

Toujours

débrancher l'outil

de la source de

courant en votre

absence, en

effectuant des

réparations ou son entretien, en

débloquant l'appareil ou en le

déplaçant ailleurs. Le raccordement

du tuyau d’air comprimé doit

toujours s’effectuer AVANT le

chargement du magasin. Ne pas

charger l'outil d'attaches lorsque la

gâchette est enfoncée ou lorsque le

mécanisme de déclenchement par

contact (WCE) est engagé. L’éjection

accidentelle d’une attache peut

causer des blessures graves ou

mortelles.

Utiliser seulement

une source d'air

comprimé à pression

pour limiter la

pression d'air fournie

à l'outil. La pression

contrôlée ne doit pas dépasser 690

kPa. S'il y a une défaillance du

régulateur, la pression livrée à

l'outil ne doit pas dépasser 1379

kPa. L'outil pourrait exploser ce qui

pourrait mener à la mort ou à des

blessures graves.

Ne jamais utiliser de

l’essence ni les fluides

inflammables pour le

nettoyage de l’outil.

Ne jamais utiliser

l’outil près d’un liquide ou gaz

inflammable. Une étincelle peut

allumer les vapeurs et causer une

explosion qui peut résulter en perte

de vie ou blessures graves

personnelles.

Toujours bien

s’équilibrer

pendant la

manipulation ou

l’utilisation de

l’outil.

Ne pas retirer,

modifier ou faire

quoique ce soit

qui pourrait

rendre la gâchette

ou le mécanisme

de déclenchement par contact (WCE)

inutilisable. Ne pas faire fonctionner

d'outil qui a été modifié de cette

façon. Cela pourrait mener à la mort

ou à de graves blessures

Généralités sur la

Sécurité (Suite)

RESPONSABILITÉ DE L’EMPLOYEUR

(Suite)

Il pourrait y avoir de graves lésions

oculaires ou perte auditive.

• S'assurer que l'outil soit conservé en

bon état tel que décrit dans ce

manuel.

• S'assurer du bon entretien de tous

les outils de l'employeur.

• S'assurer que les outils qui doivent

être réparés ne soient plus utilisés

avant leur réparation. Les moyens

de contrôle sont les étiquettes et la

ségrégation physique.

Danger

indique

une situation hasardeuse imminente

qui RÉSULTERA en perte de vie ou

blessures graves.

Lire et comprendre les

étiquettes et le manuel

sur les outils. Ne pas

suivre les avertissements,

les dangers et les mises

en garde pourrait causer

la MORT ou de GRAVES BLESSURES.

Ne pas utiliser comme

source d'alimentation

tout type de gaz

réactif, y compris,

mais sans s'y limiter,

de l'oxygène et des

gaz combustibles. Utiliser seulement

de l’air comprimé filtré, lubrifié et

réglé. Utiliser un gaz réactif au lieu

d'air comprimé pourrait faire

exploser l’outil ce qui pourrait

provoquer des blessures graves

voire la mort.

690 kPa

CAMPBELL

PROFESSIONAL

HAUSFELD

OCO2

10 Fr

Modèle NB004200

Instructions D’Utilisation

Chargeur

Gâchette

Pièces Détachées et Spécifications

de la Cloueuse

Mécanisme De

Déclenchement Par Contact

Endroit de chargement

de clous

Échappement

réglable

Endroit

d’expulsion

des clous

Indicateur de recharge

• EXIGE: 0.04 m3/min avec 10 clous par

minute à 621 kPa

• PRISE D’AIR: 1/4 po NPT

• TAILLES DE CLOUS: 3/8 po à 2 po

• CAPACITÉ DU CHARGEUR: 100 clous

par charge, calibre 18

• POIDS: 1,56 kg

• LONGUEUR: 25,72 cm

• HAUTEUR: 24,13 cm

• PRESSION MAXIMALE: 690 kPa

• GAMME DE PRESSION: 414 - 690 kPa

Nez à

dégagement

rapide

Contrôle de

profondeur

ajustable

(CPA)

Bouton de

verrou de

Chargeur

Inhaltsverzeichnis

Sprachen:

Andere Campbell Hausfeld Nagelpistole Handbücher

Campbell Hausfeld

Campbell Hausfeld NB0050 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld CHN70800 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld SB504000 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld NS2190 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld IRON FORCE IFN03000 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld NS219001 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld NB006401 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld IN180300AV Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld NB006750 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld SB3232 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld CHN90498 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld CHN10199 Installationshandbuch

Campbell Hausfeld

Campbell Hausfeld AT802000 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld IN715703AV Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld NB004100 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld IN734600AV Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld CHN10510 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld IN704700AV Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld RN164500 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld NB003006 Anwendungshandbuch

Campbell Hausfeld

Campbell Hausfeld Brad Nailer CHN70200 Kurzanleitung

Campbell Hausfeld

Campbell Hausfeld IN715501AV Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld SB504010 Bedienungsanleitung

Campbell Hausfeld

Campbell Hausfeld SB323200 Bedienungsanleitung

Beliebte Nagelpistole Handbücher anderer Marken

Performance Tool

Performance Tool M643 Bedienungsanleitung

Hitachi

Hitachi VH650 - Fencing Nailer, Full Head Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco Fusion Technology F-35XP Bedienungsanleitung

Grizzly

Grizzly G1847 Bedienungsanleitung

Ryobi

Ryobi R18N18G Bedienungsanleitung

Black & Decker

Black & Decker 492848-00 Bedienungsanleitung

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN TN90 Bedienungsanleitung

Metabo HPT

Metabo HPT NR 3690DC Bedienungsanleitung

Surtek

Surtek CN650 Abmessungen und Installationsanleitung

Makita

Makita GF600 Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco AirFree 25 Bedienungsanleitung

Freeman

Freeman P50LSLW Bedienungsanleitung

Aicon PRO

Aicon PRO DAC4507 Bedienungsanleitung

Makita

Makita AN923 Bedienungsanleitung

Grizzly

Grizzly T20644 Bedienungsanleitung

Black & Decker

Black & Decker 90514937 Bedienungsanleitung