CAMSO 30/36D23MC Bedienungsanleitung
CPB-436(2017)
2P-0067
Models 30/36D23MC, 30/36D22MC, 24D17C and 24D18C for Tractors
Serial Numbers TRE1116007 & later
OPERATION AND
MAINTENANCE MANUAL
CONVERSION TRACK SYSTEM
CBP-436(2017) Operation and Maintenance Manual-CTS Tractors Camso | 12-17 | 2
PAGE INTENTIONALLY BLANK
CBP-436(2017) Operation and Maintenance Manual-CTS Tractors Camso | 12-17 | 3
Table of Contents
1.0 INTRODUCTION ...................................................................................................................5
1.1 LAW REFERENCES .........................................................................................................5
1.2 MANUFACTURER IDENTIFICATION................................................................................5
1.3 "EC" CERTIFICATE...........................................................................................................6
2.0 SAFETY ................................................................................................................................7
2.1 Important Safety Information..............................................................................................7
2.2 Safety Signs ......................................................................................................................8
2.3 Safety Sign Locations ........................................................................................................9
3.0 GENERAL INFORMATION.................................................................................................. 10
3.1 Technical Description ......................................................................................................10
3.2 Track System Components..............................................................................................11
Suspended Frame (30/36D23MC & 30/36D22MC)............................................................. 11
Fixed Frame (24D17C and 24D18C) ..................................................................................11
Sprocket/Drive Wheel.........................................................................................................11
Axles ..................................................................................................................................11
Idlers and Midrollers ...........................................................................................................11
Tensioning system .............................................................................................................12
Rubber track.......................................................................................................................12
Oscillation Limiter Brackets ................................................................................................12
3.3 30/36D23MC and 30/36D22MC Specifications and Dimensions...................................... 12
3.4 24D17C and 24D18C Specification and Dimensions ....................................................... 13
3.5 Approved Applications .....................................................................................................13
3.6 Weight Limitations ...........................................................................................................14
3.7 Maximum Speeds ............................................................................................................14
3.8 Transport Limitations .......................................................................................................14
3.9 Operational Guidelines .................................................................................................... 15
3.10 Track Break-in Procedures ............................................................................................16
4.0 TRACK SYSTEM INSTALLATION.......................................................................................17
4.1 Handling of the Track System..........................................................................................17
4.2 Tractor Preparation..........................................................................................................17
4.3 Track System Installation onto the Machine..................................................................... 17
5.0 SCHEDULED MAINTENANCE............................................................................................ 19
5.1 General information .........................................................................................................19
CBP-436(2017) Operation and Maintenance Manual-CTS Tractors Camso | 12-17 | 4
5.2 Operating instructions before starting the machine .......................................................... 19
5.3 Maintenance table ...........................................................................................................20
5.4 Daily maintenance or every 10 working hours.................................................................. 21
5.5 Weekly maintenance or every 50 working hours.............................................................. 22
5.6 Yearly maintenance or every 400 working hours.............................................................. 23
5.7 After-season long term storage........................................................................................24
5.8 Installation after long term storage...................................................................................24
6.0 ROUTINE MAINTENANCE..................................................................................................25
6.1 Track tension adjustment.................................................................................................25
6.2 Tensioning circuit discharge/purge .................................................................................. 28
6.3 Track alignment adjustment.............................................................................................30
6.4 Track system inspection .................................................................................................. 30
6.5 Front and Rear idler Axle and Midroller Axle oil level check............................................. 32
6.6 Front and Rear idler Axle and Midroller Axle oil replacement........................................... 32
6.7 Main support oil replacement...........................................................................................34
6.8 Track Removal ................................................................................................................36
6.9 Track Installation.............................................................................................................38
6.10 Lubricant Table..............................................................................................................42
7.0 TROUBLESHOOTING.........................................................................................................43
8.0 Other Information.................................................................................................................44
9.0 Warranty..............................................................................................................................45
CBP-436(2017) Operation and Maintenance Manual-CTS Tractors Camso | 12-17 | 5
1.0 INTRODUCTION
This manual provides important installation and maintenance instructions to maximize the
benefits of the 30/36D22MC, 30/36D23MC, 24D17C and 24D18C track systems and to ensure
performance in the field for many years.
This manual was prepared with the latest information available at the time of publication. Read
this manual carefully before operating or servicing the undercarriage(s).
The photos, illustrations, and data used in this manual were current at the time of printing, but
due to possible production changes, your undercarriage may vary slightly. Camso reserves the
right make changes to new production undercarriages as necessary without notification.
This document must be considered as an integral part of the rubber track system, it must always
be available for reference near the machine, even in the case of sale, and until end of life.
Should the operations and maintenance manual supplied with the machine be damaged or
missing, please see your dealer to request another copy and/or contact Camso immediately.
1.1 LAW REFERENCES
This handbook is written according to the prescriptions of the Machine Directive 2006/42/EC.
The design and the manufacturing of this machine have been performed in accordance with the
in force rules concerning work safety and health requirements. The following regulations have
been specially taken into consideration:
xUNI EN ISO 12100:2010 " Safety of machinery - General principles for design - Risk
assessment and risk reduction“
xUNI EN ISO 13857:2008 " Safety of machinery - Safety distances ".
1.2 MANUFACTURER IDENTIFICATION
The Camso company declares to be the manufacturer of the machine described in this
handbook and, to prove it, supplies the following documents.
xEC- Declaration of conformity;
x“EC” certificate
xOperating and maintenance manual
The Camso company declares that the machine has been manufactured at the following factory:
Camso Manufacturing Italy Srl
Via Rossi, 37 - 25010 Remedello (BS) - ITALY
Tel. (+39) 030/9953106 - Fax (+39) 030/9579661
e-mail: Ag.productsupport@camso.co
CBP-436(2017) Operation and Maintenance Manual-CTS Tractors Camso | 12-17 | 6
1.3 "EC" CERTIFICATE
The information about “EC” certificate are written in an indelible way on a special metal label
fixed on the machine. A written copy of the DECLARATION OF CONFORMITY referring to the
data on the label is enclosed to this handbook.
WARNING: Do not remove the “EC” label or change it with another one referring to
another similar machine available at the customer’s factory.
WARNING: The customer must immediately inform the Camso company in case of
damage to the “EC” label or in case of the manufacturer’s seal removal
DATA ON THE “EC” (CE) LABEL
MODEL CTS
TYPE 3XD22MC
SERIAL NUMBER TREXXXX
YEAR 20XX
CBP-436(2017) Operation and Maintenance Manual-CTS Tractors Camso | 12-17 | 7
2.0 SAFETY
2.1 Important Safety Information
Read and understand this manual, the operation manual for the equipment the undercarriage is
mounted to, and the manual for all attachments before operating, servicing or repairing an
undercarriage.
Most personal injuries occurring during equipment operation, maintenance, or repair are caused
by failure to observe basic safety rules and precautions. In most cases, an injury can be avoided
by recognizing hazardous situations before an injury occurs.
A person must be alert to potential hazards. This person should also have the necessary
training, skills and tools to perform these functions properly.
Improper operation and maintenance of this product can be hazardous and may result in injury
or death.
Do not perform any lubrication, maintenance or repair on this product, until you have read and
understood this Operators manual.
Safety precautions and warnings are provided in this manual and on the product. If these hazard
warnings are not heeded, bodily injury or death could occur to you or to other persons.
Not every possible circumstance that might involve a potential hazard can be anticipated. The
warnings in this publication and on the product are, therefore, not all inclusive. If a tool,
procedure, work method or operating technique that is not specifically recommended by Camso
is used, you must satisfy yourself that it is safe for you and for others.
You must also make sure that the product will not be damaged or be made unsafe by the
operation, lubrication, maintenance or repair procedures that you choose. The information,
specifications, and illustrations in this publication are on the basis of information that was
available at time of printing.
Always ensure that the equipment unto which you have installed our product is compliant with all
applicable safety regulations, including road regulations, after installation and before use.
CBP-436(2017) Operation and Maintenance Manual-CTS Tractors Camso | 12-17 | 8
2.2 Safety Signs
WARNING: DO NOT remove or obscure safety signs. Replace any safety signs that
are not readable or are missing. Replacement signs are available from your dealer in
the event of loss or damage. The actual location of the safety signs is illustrated at the
end of this section.
If a used undercarriage system has been purchased, make sure all safety signs are in the
correct location and can be read. See Safety Sign Location of this section for illustrations.
Replace any safety signs that cannot be read or are missing. Replacement safety signs are
available from your dealer.
Specifications, torques, pressures, measurements, adjustments, illustrations, and other items
can change at any time. These changes can affect the service given to machine. Obtain
complete and most current information before starting any job. Dealers have the most current
information available.
CBP-436(2017) Operation and Maintenance Manual-CTS Tractors Camso | 12-17 | 9
2.3 Safety Sign Locations
Safety signs are applied on the track frame to alert on not eliminable residual risk.
It is important that the operator, for his safety, respect and memorize the content of these signs.
Replace them if damaged.
Sign description
Sign 1
Read carefully the handbook before operating the machine.
Sign 2
Disconnect the transmission, stop the engine, set on the emergency brake, remove the
key and allow machine to stop and cool before starting any kind of service on the
machine.
Sign 3
Keep a safe distance from the combine harvester with engine on. Danger of object(s)
being thrown from track system.
Sign 4
CTS installation bolts tightening torque check .
Safety Sign Locations
CBP-436(2017) Operation and Maintenance Manual-CTS Tractors Camso | 12-17 | 10
3.0 GENERAL INFORMATION
3.1 Technical Description
The Camso CTS allows machines to move on muddy and soft soils which have limited carrying
capacity. The wide supporting surface of the track system also reduces soil compaction.
The Camso CTS can be mounted on the tractor with no modifications to the tractor, ensuring
quick and easy changes from tracks to wheels and vice versa.
The Camso CTS application on tractors does not alter the distribution of the weight on the tractor
axles so there is little to no difference in driving a tractor with CTS installed or wheels installed.
The Camso track systems have been designed to minimize the stresses on the tractor when on
firm soil, without compromising the flotation characteristics in the worst working conditions.
The 30/36D23MC and 30/36D22MC models feature a suspension system to improve driver
comfort in terms of shock and vibration reduction and improved roading and field ride.
Besides the above listed characteristics, the Camso rubber track system introduces other
advantages.
xReduced power absorption on soft soils
xAlmost no possibility of rubber track de-tracking from the undercarriage
xAdequate roading speed
xLimited damages on the soil even during end of field maneuvers
xReduced risk of self-sinking in the mud in case of slipping
xGreat self-cleaning capacity of the rubber track and consequently good traction in all
working conditions
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
