DigitaltoAnalogConverter
ZeroUNO
DAC–OPERATINGINSTRUCTIONS
ZeroUNO
DACpage6
INFRARED REMOTE CONTROLLER
Key Value
Balance left to right in steps of 0.5dB each. Range is 0-5dB
Volume Up and Down steps of 1.0dB. Range is -60dB to 0dB
Phase Absolute Polarity < toggle > Inverse Absolute Polarity
Mute Mute < toggle > Play
Setup See SETUP KEY on the front panel description
The remote controller (RC) coming with each ZeroUno DAC has been
paired already with the DAC in the factory by selecting one of 256 possible
pairing codes.
In case of interference with the RC´s of other electronics in the household
the preselected RC code can be changed at any time.
To change the code, first move the RC close to the ZeroUno DAC (about
1 meter). Then press the SETUP and POLARITY buttons at the RC
simultaneously for at least 5 seconds.
In a second step the RC must be paired with the DAC again.
To pair the RC, press the SETUP button at the front of the ZeroUno DAC for at least 2 seconds to enter in
SETUP mode, release the button and finally press simultaneously the SETUP and the INPUT buttons.
If there is still interference with other RC´s in the household, please restart the above described process to
generate another code.
The procedure is the same if you have a compatible RC.
To have an immediate feedback of the ZeroUno DAC status, every time a key is pressed at the RC, the display
shows in big digits and for 5 seconds the value set.
````!!~`|!~``````!~
````|’!`````|’```’`
`````""`”"“`”"```"“
LOCK.DSD.11.2.MHz
Volume.:.-20dB
Balance:.>><<.PHASE+
INPUT..:.USB
When the VOLUME keys are pressed, the attenuation changes with
steps of 1.0dB. Range is -60dB to 0dB.
If the key is kept pressed the attenuation changes quickly.
If no key is pressed within 10 seconds the ZeroUno DAC automatically
stores the values shown at the display and switches back to the
PLAY/MUTE mode.
````!!~`|!`!!````!~
````````!!~`|!`!!``
`````````’````!’‘’`
`````""`""“`""”"“"`
`````````II`````````
``!~`|!~````|!~```!~
``|!`````|````````’`
```"`”"“`""`”"“```"“
````!!~`|!`!!````!~
`````!~`|!~`|!`!!`~
`````"“```````!’‘’`
`````"~`”"“`""”"“"“
LOCK.DSD.11.2.MHz
Volume.:.-20dB
Balance:.R0.5.PHASE+
INPUT..:.USB
When the BALANCE keys are pressed, the balance changes in 0.5dB
steps. Range is LEFT -5.0dB to RIGHT +5.0dB.
To help the user the 1st row of the display reports a bar showing the
position of the balance value in the range -5.0dB to 5.0dB.
When the balance is set to 0.0dB the display shows clearly the
condition.
If no key is pressed within 10 seconds the ZeroUno DAC automatically
stores the values shown at the display and switches back to the
PLAY/MUTE mode.
