Cannon 1904030 Bedienungsanleitung

PEDESTAL MOUNTS

CAUTION:

READ THIS MANUAL CAREFULLY

BEFORE OPERATING YOUR

NEW CANNON ACCESSORY.

RETAIN FOR FUTURE REFERENCE.

NOTE: Do not return your CANNON accessory to your

retailer. Your retailer is not authorized to repair or re-

place this unit. You may obtain service by:

• calling CANNON at 1-800-227-6433;

• returning your accessory to the Factory Service Center;

121 Power Drive, Mankato, MN 56001

Please include proof of purchase and purchase date for

warranty service with any of the above options.

Owner’s Manual

4” Fixed Pedestal mount

6” Fixed Pedestal mount

4” Swivel Pedestal mount

6” Swivel Pedestal mount

1904030

1904031

1904032

1904033

Pedestal Mount Models & Features

1904030 Fixed Base Downrigger Pedestal 4”

1904031 Fixed Base Downrigger Pedestal 6”

Cannon’s fixed base downrigger pedestals can be surface mounted or track mounted for a variety of

mounting positions and easy removal. The 3/4” thick aluminum top plate is pre-drilled and tapped for mounting Can-

non downriggers as well as most Scotty®, Big Jon®, Penn®, Vector, Proos, Fishlander and Walker downriggers.

Components are made from clear anodized aluminum and stainless steel for strength and corrosion resistance. The

fixed base downrigger pedestals are compatible with Cannon, Bert’s, and Traxstech track systems. Available in 4”

and 6” heights.

1904032 Swivel Base Downrigger Pedestal 4”

1904033 Swivel Base Downrigger Pedestal 6”

Cannon’s swivel base downrigger pedestals can be surface mounted or track mounted for a variety of

mounting positions and easy removal. With 16 locking points, these downrigger pedestals allow for 360° downrigger

rotation with locking points every 22.5°. The 3/4” thick aluminum top plate is pre-drilled and tapped for mounting

Cannon downriggers as well as most Scotty®, Big Jon®, Penn®, Vector, Proos, Fishlander and Walker downrig-

gers. Bearing system ensures smooth swivel action even while a downrigger weight is attached. Components are

made from clear anodized aluminum and stainless steel for

strength and corrosion resistance. The swivel base downrigger

pedestals are compatible with Cannon, Bert’s, and Traxstech track

systems. Available in 4” and 6” heights.

How to use the Swivel Pedestal

Cannon’s swivel base downrigger pedestals allow you to rotate the mounting plate for optimal positioning.

To rotate the mounting plate, disengage the lock pin by pulling the lock pin handle down. Turn the plate to the de-

sired angle and release the spring loaded lock pin making sure that it reengages. Check to make sure the swivel is

in a fixed position.

Swivel Base Break Away Reset

The Cannon Swivel bases feature a unique break away system which allows the top plate to rotate while in

the locked position. The break away feature will help prevent damage to the downrigger and boat in the event that

the downrigger boom or ball would strike an object. If this should occur, the mounting plate of the swivel pedestal

will turn, giving way to the unexpected load. The mounting plate can be reset back to any position by following

these steps:

1) Locate the 3/8” bolts on the bottom of the top plate (See Figure 1).

2) With the pedestal locked in any position, loosen the bolts

3) Rotate the mounting plate back to the desired position.

4) Tighten the 3/8” bolts to 25 ft-lb.

Note: The downrigger weight must be stowed before resetting the swivel pedestal mount.

Figure 1

3/8” Tension Bolts

25 ft-lb torque

35 ft-lb torque max Lock Pin Handle

Mounting to Cannon Track Mount

For versatility and lightening quick mounting, the Cannon Mounting

Track system is ideal for utilizing your pedestal mount on your boat. Slide the

base of the pedestal into the track and tighten the thumb screws to fix the pedes-

tal in position. You may use a 3/16” Allen wrench for additional tightening.

Note: For the Swivel Pedestal Mount, rotate the release handle to access the top of

the thumb screw with the Allen wrench.

1904025 Aluminum Mounting Track 6”

1904026 Aluminum Mounting Track 12”

1904027 Aluminum Mounting Track 18”

1904028 Aluminum Mounting Track 24”

1904029 Aluminum Mounting Track 36”

Cannon tracks allow for flexible mounting positions and easy

removal of Cannon’s track system accessories. Locking grooves allow

thumb screws to index with track and prevent accessories from twisting.

The system is compatible with Cannon, Bert’s, and Traxtech track system

products. Components are made from clear anodized aluminum and

stainless steel for strength and corrosion resistance. All mounting hard-

ware included. Available in 6, 12, 18, 24, and 36 inch lengths.

Mounting to Cannon Deck Mount

The Cannon Deck Mount works great for adding stability and easy removal of your pedestal mount. With

your Cannon Deck Mount installed on your boat, attach your pedestal mount by removing the thumb screws and

fastening the pedestal base to the plate with four 1/4”-20 x 3/8” long flat head screws.

1904000 Deck Mount

The Cannon Deck Mount plate is a four inch by three inch

clear anodized aluminum plate which allows the hard mounting of

Cannon Dual Axis Rod Holders. The plate comes with a black pro-

tective mounting boot and all mounting hardware.

Mounting the Pedestal to Your Boat

Mounting Directly to Deck or Gunnel

Carefully choose an ideal position where you may best utilize your pedestal mount. Use the base of the

pedestal as a template to mark hole locations and drill four 9/32" diameter through holes. Fix the pedestal to the

deck or gunnel using four 1/4”-20 flat head screws with four flat washers, lock washers, and nuts (not included). To

determine the length of screw needed, measure the thickness of deck that you are mounting to and add at least

3/4”.

CAUTION:

The Cannon Pedestal

Mount is intended for use

with a Track that is

mounted directly to the

deck of the boat ONLY.

Pedestal Mount \ Accessory Compatibility

Replacement Parts

Mounts

Pedestal

○○●

6" Swivel Mount

●○○

●

- Compatible

○

- Not Compatible

4" Swivel Mount

Track Mount Gimbal Track Mount Pedestal Track Mount

●○○

4" Fixed Mount

6" Fixed Mount

Rail Mount Clamp Mount Deck Mount

●○○○○●

○○●

●○○○○●

Part Part Number Description USED ON

3393413 THUMB SCREW 1904030, 1904031, 1904032, 1904033

Troubleshooting - Swivel Pedestal

Problem: Pedestal will not rotate when the lock pin is disengaged.

Make sure the downrigger line is all the way up. Any load on the downrigger or pedestal may prevent the pin from

disengaging. Spray a lubricant into the slot which the lock pin slides. Make sure lock pin moves freely up / down.

Problem: Pedestal rotates while in locked position under normal use.

The break away bolts are not tight enough. Re-torque bolts to 25 ft-lb.

NOTE: Bolts may have to be tightened higher than 25 ft. lbs under some conditions. Do not exceed 35 ft-lb as this may

damage the top plate.

Problem: Pedestal did not breakaway while locked when the boom struck an object.

The break away bolts are over-tightened. Loosen bolts and re-torque to 25 ft. lbs.

Mounting Your Downrigger to the Pedestal Mount

The Cannon Pedestal Mount provides 1/4”-20 tapped mounting holes for attaching most downrigger

mounting bases. To attach a mounting base you will need four 1/4”-20 screws (not included). To determine the

length of screws needed, measure the thickness of the downrigger mounting base and add 1/2”. See below for

screw lengths for the Cannon Downrigger mounting bases.

Magnum / Digi-Troll Tall Mounting Base — 2” Long Truss Head screw

Uni-Troll Low-profile Mounting Base — 1” Long Truss Head screw

Easi-Troll / Lake-Troll Tab-Lock Base — 3/4” Long Truss Head screw

WARNING: This product contains chemical(s) known to the state of California to cause cancer and/or reproductive toxicity.

Form No. 3397127 Rev D

Johnson Outdoors, Inc. / Cannon Division

121 Power Drive, Mankato, MN 56001

1-800-227-6433

CANNON®LIMITED WARRANTY

Johnson Outdoors Inc. warrants to the original purchaser that the accompanying product (see exclusions below) is free from

defects in material or workmanship for a period of one (1) year from the date of purchase. Within the warranty period, Johnson

Outdoors Inc. will, at its option, either repair or replace same without charge (but no cash refunds will be made). The unit must be

returned, prepaid and with proof of the date of purchase to the following:

●Johnson Outdoors, Inc Cannon Division, 121 Power Drive, Mankato, MN 56001

This limited warranty may be enforced only by the original purchaser; all subsequent purchasers acquire the product "as is" with-

out any benefit of this limited warranty. Repair or replacement of the product as set forth in this limited warranty shall be the origi-

nal purchaser’s sole and exclusive remedy and Johnson Outdoors Inc.’s sole and exclusive liability for breach of this warranty.

EXCLUSIONS

This warranty does not apply in the following circumstances:

• When the product has been connected, installed, combined, altered, adjusted, serviced, repaired, or handled in a manner other than according

to the instructions furnished with the product

• When a serial number has been defaced, altered, or removed

• When any defect, problem, loss, or damage has resulted from any accident, misuse, negligence, carelessness, or abnormal use, or from any

failure to provide reasonable and necessary maintenance in accordance with the instructions of the owner's manual

LIMITATION AND EXCLUSION OF IMPLIED WARRANTIES AND CERTAIN DAMAGES

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THESE LIMITED WARRANTIES. JOHNSON OUTDOORS INC.

DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES, AND IN NO EVENT SHALL ANY IMPLIED WAR-

RANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, EX-

TEND BEYOND ONE YEAR FROM THE DATE OF PURCHASE. THIS WRITING CONSTITUTES THE ENTIRE AGREEMENT

OF THE PARTIES WITH RESPECT TO THE SUBJECT MATTER HEREOF; NO WAIVER OR AMENDMENT SHALL BE VALID

UNLESS IN WRITING SIGNED BY JOHNSON OUTDOORS INC.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of consequential damages, so the above limitation or exclusion

may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

To download product manuals or purchase Cannon products from an authorized dealer, please visit our web page at www.cannondownriggers.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cannon Rack & Stand Handbücher

Cannon

Cannon 1907000 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung