Canon ImageRUNNER C3120 Bedienungsanleitung

Getting Started

FT6-2522 (000) XXXXXXXXXX Copyright CANON INC. 2019 PRINTED IN THAILAND

Quick Operation P.7

Quick Setup NEXT PAGE

Please read "Important Safety Instructions" (aP.15) before operating this product.

After you finish reading this guide, store it in a safe place for future reference.

The information in this document is subject to change without notice.

https://oip.manual.canon/

Conguring the Method of

Connecting to a Computer

About Application Library

Application Library is an application

that allows you to use useful functions

for routine jobs or other convenient

functions in a one-touch operation

without necessity of making functional

settings every time. You can access each

registered function by simply pressing

the appropriate button displayed in

the Home screen. For the respective

function, see the description displayed in

the Setup Guide.

2. Configure the initial settings, according to the

screen.

• Set the language

• Set the country and region

• Set the time zone

• Set the date and time

• Configure the Remote UI Access

• Perform color correction

IMPORTANT

To prevent unauthorized access by third parties,

you need a PIN for login to the remote UI that

has been set on the machine.

Before starting the configuration

• The machine cannot be connected to

both wired and wireless LANs at the

same time.

• If the machine is connected to an

unsecured network, your personal

information might be leaked to a third

party. Please be aware and careful of this.

• The machine does not come with a

router. Please have one ready, if necessary.

• Even in an environment without wireless

LAN router, you can use Access Point

Mode to make a wireless connection to

the machine directly from your mobile

device (Direct Connection).

User's Guide

Specifying the connection method

• To connect via wireless LAN : <Yes>

• To connect via wired LAN or USB : <No>

To connect via wireless LAN

1. Make sure that the computer is connected to a

router properly.

2. Check the network settings on the computer.

Conguring the Machine

Conguring the Initial Settings of

the Machine

Configure the settings in the following order.

Quick Setup

For details

"Setting Up Using the Setup Guide" in the User's Guide

3. Take note of the SSID and network key.

• Check the label on the router. User's Guide

• The setting operation is easier if the router is

provided with a WPS mark. User's Guide

4. Set the access point and network key

according to the screen below.

1. Select <OK>.

2. Select <SSID Settings>.

3. Select <Select Access Point>.

4. Select the access point (SSID), and select

<Next>.

5. Enter a network key, and select <Apply>.

6. Select <Yes>.

• Wait until message <Connected.> is

displayed.

7. Select <Close>.

• The IP address will be automatically

configured in a few minutes.

5. Install the driver and software.

P.4 "IInstalling the software"

To connect via wired LAN

The machine does not come with a LAN cable.

Please have one ready, if necessary.

1. Make sure that the computer is connected to a

router properly.

2. Check the network settings on the computer.

3. Connect the LAN cable.

• After connecting the cable, wait a few minutes

(until the IP address is set automatically).

• If a static IP address has been set on the

computer, set the machine's IP address

manually.

4. Install the driver and software.

P.4 "IInstalling the software"

Now you are finished with the

configuration of the initial settings.

If your machine is provided with the fax

function, proceed to configuring

the fax settings. P. 5

Now you are finished with the

configuration of the initial settings.

If your machine is provided with the fax

function, proceed to configuring

the fax settings. P. 5

Quick Setup

To connect via USB

• The machine does not come with a USB cable.

Please have one ready, if necessary.

• Make sure that the USB cable you

use has the following mark.

• Do not connect the USB cable before installing

the driver. If you did, disconnect the USB cable

from the computer, close the dialog box, and then

perform the following procedure from step 1.

1. Install the driver and software.

P.4 "IInstalling the software"

Now you are finished with the

configuration of the initial settings.

If your machine is provided with the fax

function, proceed to configuring

the fax settings. P. 5

IInstalling the software

• The procedure described here is only applicable

when your computer runs on the Windows OS.

For more details on the software installation

procedure, see the driver's manual.

• For the installation when your computer runs on

the macOS, see the driver's manual.

• Your machine may not come with the driver for

the macOS, depending on the time of purchase.

New drivers are uploaded to the Canon website,

and you can download and use the latest one.

If the screen is not displayed properly, re-

insert the CD-ROM/DVD-ROM or search for

"D:\MInst.exe" on the Windows platform (This

description assumes that "D:" is the CD-ROM/

DVD-ROM drive name).

Conguring the Machine

Quick Setup

Before starting the configuration

If your machine does not come with

a telephone cable, have one ready, as

necessary.

Configure the fax settings, according to the screen

below.

1. Select <Fax>.

2. Select <Set Up Now>.

3. Register the machine's telephone number (fax

number) and abbreviated user name.

• The information below will be printed at

the top part of the paper output from the

destination machine as sender information.

02/02 2017 10:00AM CANON123XXXXXXXFAX 0001

Sent Time Unit Name Page Number

Number's Type

Fax Number

4. Set the reception mode.

• Make the setting by answering the questions

on your purposes of using the fax function.

5. Connect to a telephone line.

Telephone line jack

Telephone

6. Select <End>.

7. Select <Yes>.

Now you are finished

with the configuration.

For details

"Configuring Initial Settings for Fax Functions" in the User's Guide

Conguring Fax Settings

Quick Setup

Quick

Operation

Remember before

You Start Operation

Place your originals into the feeder*

* This operation is available only on models that have a feeder

attached.

Place the originals

with the scan side

face up.

Adjust

the slide

guides.

Suitable for continuously

scanning many pages of

literature, quotation, etc.

Place your original on the platen glass

Place the original

with the scan side

face down.

Place to fit

inside the

corner.

Suitable for scanning book

pages, magazine pages and

newspaper clips.

Place the Original Properly

Start the Operation from the Operation Panel

Scanning

Machine

1. Place the original.

2. Press , and select <Scan>.

3. Select the type of scan, and enter the necessary information.

4. Select <Start>, <B&W Start> or <Color Start>.

Types of scan

■Store in computer

■Store in USB memory device

■Send e-mail/I-Fax

■Send to file server

To scan from a computer

■Use the scanner driver

supplied with the machine For details

"Scanning" in the User's Guide

Quick Operation

Operation Panel

Display (screen)

([Energy Saver] key)

([Home] key)

1. Place the original.

2. Press , and then select <Copy>.

3. Specify the copy settings, as necessary.

4. Enter the desired number of copies.

5. Select <Start>.

Useful copy functions

■N on 1

■2-Sided or 1-Sided

■Enlarging or reducing

■Copying ID cards

1. Place the original.

2. Press , and select <Fax>.

3. Enter the destination information.

4. Specify the fax settings, as necessary.

5. Select <Start>.

Useful fax functions

■Sequential Broadcast

■Memory Reception

■PC Fax

1. Open the document to print, and select the print function of the

application.

2. Select the printer driver for the machine, and select [Preferences] or

[Properties].

3. Specify the paper size.

4. Specify the paper source and paper type.

5. Specify the print settings, as necessary.

6. Select [OK].

7. Select [Print] or [OK].

Useful print settings

■2-sided

■N on 1

■Booklet Printing

For details

"Copying" in the User's Guide

Faxing* * This function is available only if the FAX Board is installed.

For details

"Faxing" in the User's Guide

Printing

For details

"Help" on the printer driver

Quick Operation

Copying

In the following, the operations that are common

to paper drawers 1 and 2 are described by taking

drawer 2 as example.

Slide the light blue knobs to adjust the

positions of the paper guides.

Align the protrusion to the

appropriate paper size marking.

First fan the paper stack well and then load

it.

Make sure that

this line is not

exceeded.

Paper

Envelope

The print side face up

Place the paper drawer back into the

machine.

CAUTION!

Be careful not to get your fingers caught

between the paper drawer and the

machine.

NOTE

If you have changed the paper size,

replace the label with one corresponding

to the paper size as necessary.

If you have changed the paper type, be

sure to change the paper settings.

Press , and then select <Paper Settings>.

Specify the size and type of paper, according

to the screen.

Loading in the Paper Drawer

Loading Paper

Quick Operation

Inhaltsverzeichnis

Andere Canon Multifunktionsdrucker Handbücher

Canon

Canon MultiPASS F50 Sicherheitsleitfaden

Canon

Canon PIXMA MX350 Bedienungsanleitung

Canon

Canon PIXMA TS8300 Series Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE C2030 Bedienungsanleitung

Canon

Canon imageCLASS 1100 Bedienungsanleitung

Canon

Canon MF7280 - ImageCLASS B/W Laser Bedienungsanleitung

Canon

Canon imageCLASS LBP151dw Bedienungsanleitung

Canon

Canon PIXMA MX892 Bedienungsanleitung

Canon

Canon imageclass mf810cdn Bedienungsanleitung

Canon

Canon PIXMA MG5420 Bedienungsanleitung

Canon

Canon SmartBase PC1200s Bedienungsanleitung

Canon

Canon imageRunner 2022 Bedienungsanleitung

Canon

Canon imageRUNNER 1023if Bedienungsanleitung

Canon

Canon IMAGECLASS MF4150 Benutzerhandbuch

Canon

Canon PIXMA MP190 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Canon

Canon PIXMA MP140 Series Bedienungsanleitung

Canon

Canon Color imageCLASS MF8170c Benutzerhandbuch

Canon

Canon PIXMA MX727 Referenzhandbuch

Canon

Canon E 400 Einrichtungshandbuch

Canon

Canon Oce VarioPrint DP Line Bedienungsanleitung

Canon

Canon PIXMA MG6450 Bedienungsanleitung

Canon

Canon imageRunner 400 Bedienungsanleitung

Canon

Canon IMAGECLASS MF3200 Benutzerhandbuch

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Canon imageRUNNER C3120 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken