Canon PIXMA MG3220 series Handbuch

Getting Your Multifunction

Back On Your Network

After A Router Or Network Change

PIXMA MG3220

Windows OS

If any of the following situations exist

•You have replaced your Router or Access Point

•You want to use a different wireless network

•Router settings have been changed.

Please complete the following steps to apply the new configuration settings to your

multifunction.

Connecting to the Network

Preparing to Connect My Multifunction

To My Network << Previous Next >>

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is

complete, and that the computer is connected to the network.

Preparing to Connect My Multifunction

To My Network << Previous Next >>

Notes on Network Connection

•The configuration, router functions, setup procedures and security settings of

the network device vary depending on your system environment. For details,

refer to your device's instruction manual or contact its manufacturer.

•In an office setup, consult your network administrator

•If you connect to a network that is not protected with security measures, there

is a risk of disclosing data such as your personal information to a third party.

•Place the machine and computer on the same network segment.

An "Ad-hoc connection," which establishes a direct wireless connection between

the computer and printer without using an access point, is not supported.

A router or access point is required for your printer to be used on a wireless

network.

Software Installation

To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The

installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application

software to be installed.)

Installing the Drivers & Software

IMPORTANT

•Log on as the administrator (or a member of the Administrators group).

•Quit all running applications before installation.

•Do not switch users during the installation process.

•Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.

•It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the

Setup CD-ROM during restarting. The installation resumes once your computer has restarted.

•If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access

the network. If such a warning message appears, set the security software to always allow access.

<< Previous Next >>

Reconfigure the PIXMA MG3220 to Your Wireless Network

To re-establish communication on the network after changing the router / Access Point or when connecting to a different network, the settings

on the Multifunction need to be changed. You will be following the same procedure as a first time setup

*Insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions.

*If you don’t have or cannot use the Setup CD-ROM, you can still install the printer using a downloaded file. Click here for information.

If the following screen appears after starting the setup file or the Mini Master setup, select “Start Setup Again”

Connecting to the Network

<< Previous Next >>

Reconfigure the PIXMA MG3220 to Your Wireless Network

Be sure to select Wireless Connection on the Connection Method Selection screen (1-2).

Connecting to the Network

<< Previous Next >>

Continue carefully following the Printer Setup instructions (Steps 2-1 through 2-3) until the Setup Procedure Selection screen (3-1)

appears. This is shown on the next page.

Connecting to the Network

<< Previous Next >>

On the Setup Procedure Selection screen (3-1) screen, select Wireless Setup Using the USB Cable. This is the recommended setup method.

You will need to use the supplied USB cable

Continue to follow any on-screen instructions until the Software Installation List appears. This screen is shown on the next page

Select the Drivers & Software

<< Previous Next >>

On the Software Installation List select any additional* software to install and click Next.

*MP Drivers is required for installation and cannot be deselected. In addition, we recommend installing My Image Garden and Quick

Menu in order to take full advantage of your printer’s features. It is not necessary to reinstall these applications if they were installed

previously.

*If you are using the downloaded ‘Mini

Master setup’ file to install the printer,

only the MP Drivers will be installed.

Additional software can be downloaded

separately.

The software can be found in the

Software section of Drivers & Software

(the same page where you downloaded

the Mini Master setup file)

It is not necessary to reinstall these

application programs if they were

installed previously.

Connecting to the Network

<< Previous Next >>

The drivers and software will install. Continue to follow the on-screen instructions.

Connect the supplied USB cable to the printer and computer when the Connect Cable screen appears

The Connect Cable screen closes automatically after the printer is detected

Andere Handbücher für PIXMA MG3220 series

Inhaltsverzeichnis

Andere Canon Multifunktionsdrucker Handbücher

Canon

Canon imageRUNNER ADVANCE C2230 Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE C2230 Montageanleitung

Canon

Canon PIXMA MP287 Bedienungsanleitung

Canon

Canon MF7280 - ImageCLASS B/W Laser Bedienungsanleitung

Canon

Canon PIXMA MX860 series Bedienungsanleitung

Canon

Canon PIXMA MP520 Bedienungsanleitung

Canon

Canon IMAGERUNNER C2220i Bedienungsanleitung

Canon

Canon LaserBase MF3200 Series Benutzerhandbuch

Canon

Canon imageCLASS MF4100 Series Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE DX 717iZ Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE DX Bedienungsanleitung

Canon

Canon Image Runner 2000 Series Bedienungsanleitung

Canon

Canon MultiPASSTM C50 Bedienungsanleitung

Canon

Canon PIXMA MP830 Bedienungsanleitung

Canon

Canon imageRUNNER C4080 SERIES Bedienungsanleitung

Canon

Canon PIXMA MX860 series Bedienungsanleitung

Canon

Canon PIXMA MG5320 Series Bedienungsanleitung

Canon

Canon PIXMA MX700 Series Handbuch

Canon

Canon MAXIFY MB5150 Einrichtungshandbuch

Canon

Canon MultiPASS F50 Handbuch

Canon

Canon IMAGECLASS MF247dw Bedienungsanleitung

Canon

Canon CFX-L4500 IF Bedienungsanleitung

Canon

Canon PIXMA MX882 Series Handbuch

Canon

Canon imageCLASS MF212w Service-Handbuch

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung