Canon LM-V1 Bedienungsanleitung

SAFETY INSTRUCTIONS

2EN

Safety Instructions

Be sure to read these instructions in order to operate the product safely. Follow these instructions to

prevent injury or harm to the operator of the product or others.

WARNING

Denotes the risk of serious injury or death.

•Keep the product out of the reach of young children.

•Do not disassemble or modify the product.

•Do not expose the product to strong shocks or vibration.

•Do not touch any exposed internal parts.

•Stop using the product in any case of unusual circumstances such as the presence of smoke or a

strange smell.

•Do not get the product wet. Do not insert foreign objects or liquids into the product.

CAUTION

Denotes the risk of injury.

•Do not leave the product in places exposed to extremely high or low temperatures. The product may

become extremely hot/cold and cause burns or injury when touched.

For accessories with screens/viewfinders

CAUTION

Denotes the risk of injury.

•Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce

symptoms similar to motion sickness. In such a case, stop using the product immediately and rest for a

while before resuming use.

For accessories with an eyecup

CAUTIONS

Follow the cautions below. Otherwise physical injury or property damage may result.

•If any abnormal skin reaction or irritation occurs during or following the use of this product, refrain from

further use and get medical advice/attention.

For lens mount kits

WARNING

Denotes the risk of serious injury or death.

•Do not leave the lens exposed without the lens cap attached.

•Be careful not to drop the camera or accessories when attaching, removing or adjusting the

various accessories. Use a table or other stable surface.

•Do not connect/attach accessories to cameras and devices that are not compatible with them.

TABLE OF CONTENTS

3EN

2 Safety Instructions

4Introduction

5 Overview of Accessories and Compatible Cameras

6 Communications

6 GP-E1 GPS Receiver

7 GP-E2 GPS Receiver

9 WFT-E6 / WFT-E8 Wireless File Transmitter

10 Monitoring

10 LM-V1 / LM-V2 LCD Monitor

14 EVF-V50 OLED Electronic Viewfinder

17 EVF-V70 OLED Electronic Viewfinder

21 Added Functionality and Lens Compatibility

21 OU-700 Remote Operation Unit

25 EU-V1 Expansion Unit 1

28 EU-V2 Expansion Unit 2

35 MO-4E / MO-4P B4 Mount Adapter

38 CM-V1 EF Cinema Lock Mount Kit

38 PM-V1 PL Mount Kit

43 Shooting Styles and Configuration

43 GR-V1 Camera Grip

46 SU-15 Shoulder Support Unit

49 SG-1 Shoulder Style Grip Unit

Table of Contents

INTRODUCTION

4EN

Introduction

This user guide covers optional accessories compatible with CINEMA EOS series Canon cameras. It

provides information about how to use the accessories, their compatibility and specifications. Be sure to

read this information carefully to use the products correctly.

Before Using the Accessories

•Do not point monitors or viewfinders toward an intense light source, such as the sun on a sunny day or

an intense artificial light source. Doing so may damage the LCD screen/OLED screen or other internal

components. Change the accessory’s angle so that it is not pointing at the light source.

•LCD and OLED screens are produced using extremely high-precision manufacturing techniques, with

more than 99.99% of the pixels operating to specification. Very rarely, pixels may misfire or may light up

permanently. This has no effect on the recorded image and does not constitute a malfunction.

•Unless specified otherwise, power to the accessories is supplied by the camera.

•Your camera may not support all the camera features and functions described in this guide. Refer also to

the instruction manual of the camera being used.

•Some of the accessories and tools mentioned in the procedures in this guide may be supplied with

some camera models. Check the list of supplied accessories in the instruction manual of the camera

being used.

If an accessory/tool is not supplied with the camera or with the product being explained, please use an

optional accessory or commercially available product.

Conventions in this Document

•Important precautions related to the product’s operation.

•Additional information that complements the basic operation procedures.

•0Reference page number in this document.

•“Camera” refers to a compatible Canon camera or camcorder (05).

•This is a multilingual document. You can click on the language code on any page to return

to the beginning of the guide (Table of Contents) in that language.

OVERVIEW OF ACCESSORIES AND COMPATIBLE CAMERAS

5EN

Overview of Accessories and Compatible

Cameras

1Only the LM-V1 LCD Monitor is compatible.

2For details see the instruction manual of the camera being used and the RC-V100 instruction manual.

3The MO-4P B4 mount adapter can only be used after replacing the camera’s lens mount with a PL mount using the

optional PM-V1 PL Mount Kit (038).

4For details see the instruction manual of the camera being used.

The information in this document is verified as of November 2019. Subject to change without previous

notice.

Accessory EOS C100

Mark II

EOS C200

EOS C200B

EOS C500

Mark II

EOS C700

all models 0

Communications

GP-E1 GPS Receiver — — — N6

GP-E2 GPS Receiver NNN—7

WFT-E6 / WFT-E8 Wireless File Transmitter — — — N9

Monitoring

LM-V1 / LM-V2 LCD Monitor — N1N—10

EVF-V50 OLED Electronic Viewfinder — — N—14

EVF-V70 OLED Electronic Viewfinder — NNN17

Added Functionality and Lens Compatibility

RC-V100 Remote Operation Unit NNNN—2

OU-700 Remote Operation Unit — — — N21

EU-V1 Expansion Unit 1 — — N—25

EU-V2 Expansion Unit 2 — — N—28

MO-4E / MO-4P B4 Mount Adapter — — N3N35

CM-V1 EF Cinema Lock Mount Kit ——N—38

PM-V1 PL Mount Kit

CDX-36150 Codex Recorder for Canon EOS C700 — — — N—4

Shooting Styles and Configuration

GR-V1 Camera Grip — NN—43

SU-15 Shoulder Support Unit — NNN46

SG-1 Shoulder Style Grip Unit — — NN49

COMMUNICATIONS

6EN

Communications

GP-E1 GPS Receiver

Connect the GPS receiver to the camera’s system expansion terminal in CAMERA (shooting) mode to

have the GPS information (latitude, longitude, altitude) recorded with the metadata of XF-AVC clips. For

details about attaching and configuring the receiver, refer to the instruction manual of the camera being

used.

•In certain countries/regions, the use of GPS may be restricted. Be sure to use the GPS receiver

in accordance with local laws and regulations of the country/region where the receiver is used.

Be particularly careful when traveling outside of your home country.

•Be careful about using GPS functions where the operation of electronic devices is restricted.

•The GPS information recorded with clips may contain data that can lead others to locate or

identify you. Be careful when sharing geotagged recordings with others or when uploading

them to the Web.

•Do not leave the receiver near strong electromagnetic fields such as near powerful magnets

and motors.

•The GPS information recorded with clips corresponds to the location at the start of the

recording.

•Initial GPS signal reception will take longer after replacing the receiver’s battery or when first

turning on the receiver after a prolonged period of having been turned off.

•Do not place cables connected to the camera’s terminals near the receiver. Doing so may

negatively affect the GPS signal.

(attach directly)

System expansion terminal

COMMUNICATIONS

7EN

GP-E2 GPS Receiver

Connect the GPS receiver to the camera’s USB terminal in CAMERA (shooting) mode to have the GPS

information (latitude, longitude, altitude) recorded with the metadata of clips and photos. While recording, it

is recommended to place the receiver in the supplied carrying case and attach it to the camera’s grip belt

or carry it on your person.

For details about attaching and configuring the receiver, refer to the GP-E2’s instruction manual.

Recorded Information

* You can use the GPS information to search and organize clips using Canon XF Utility.

Connecting and Activating the GPS Receiver

1. Turn off the receiver.

2. Connect the receiver to the camera.

•Use the USB cable supplied with the GP-E2.

3. Turn on the receiver.

•The GPS function is activated. The icon appears on the screen and will flash as the receiver tries

to acquire satellite signals.

•When satellite signals are correctly acquired, the icon will stay continuously on. Clips and photos

recorded after that will be geotagged.

Recording format GPS information

(latitude, longitude, altitude)

Coordinated universal time

(UTC)

Clips

MP4 NN

AVCHD NN

XF-AVC* N—

RAW

(Cinema RAW Light) NN

Photos NN

USB cable (supplied with the GP-E2)

USB terminal

COMMUNICATIONS

8EN

•In certain countries/regions, the use of GPS may be restricted. Be sure to use the GPS receiver

in accordance with local laws and regulations of the country/region where the receiver is used.

Be particularly careful when traveling outside of your home country.

•Be careful about using GPS functions where the operation of electronic devices is restricted.

•The GPS information recorded with clips and photos may contain data that can lead others to

locate or identify you. Be careful when sharing geotagged recordings with others or when

uploading them to the Web.

•Do not leave the receiver near strong electromagnetic fields such as near powerful magnets

and motors.

•The GPS information recorded with clips corresponds to the location at the start of the

recording.

•You can have the camera’s date and time settings adjusted automatically according to the

information received from the GPS signal. See the [System Setup] menu settings’ table in the

instruction manual of the camera being used.

•Initial GPS signal reception will take longer after replacing the receiver’s battery or when first

turning on the receiver after a prolonged period of having been turned off.

•Do not place cables connected to the camera’s terminals near the receiver. Doing so may

negatively affect the GPS signal.

•Cameras with status screens only: You can check the GPS information being received and the

satellite’s signal strength on the status screens. For details see the instruction manual of the

camera being used.

•The camera is not compatible with the following receiver functions.

– The [Set now] option for the automatic date adjustment function

– Digital compass function

– Positioning interval function

COMMUNICATIONS

9EN

WFT-E6 / WFT-E8 Wireless File Transmitter

Connect the wireless transmitter to the camera’s system expansion terminal to be able to connect to a

wireless network or device via Wi-Fi and use the camera’s network functions. For details about attaching

and configuring the wireless transmitter, refer to the instruction manual of the camera being used.

•Do not place cables connected to the camera’s terminals near the receiver. Doing so may

negatively affect the wireless signal.

(attach directly)

System expansion terminal

MONITORING

10 EN

Monitoring

LM-V1 / LM-V2 LCD Monitor

Connect the LCD monitor to the camera to add a large monitoring screen with touch screen operations

(touch to focus), menu operation buttons and joystick and two assignable buttons.

For details on how to attach and use the LCD monitor, see the instruction manual of the camera being

used.

An optional attachment unit is also required to attach the monitor to the camera.

Names of Parts

1 LCD panel with touch screen

2 FUNC (main functions) button / Assignable

button LCD LM-V1/V2 1

3MENUbutton

4Joystick

5 MIRROR (invert the displayed image) button

6CANCELbutton

7 DISP (display) button / Assignable button LCD

LM-V1/V2 2

8 LCD monitor’s position alignment mark Í

9 Screw holes for 1/4"-20 screws (11.2 mm

(0.44 in.) deep, x2)

10 VIDEO terminal

VIDEO terminal

UN-5 / UN-10 Unit Cable (optional)

MONITORING

11 EN

Attaching the LCD Monitor

About the LCD Attachment Unit

Use the optional LA-V1 or LA-V2 LCD Attachment Unit to attach the LCD monitor to the handle unit or to

the camera’s body itself. For details see the instruction manual of the camera being used.

Attaching the LCD Monitor to the Handle Unit

1. Turn off the camera.

2. On the LCD attachment unit, rotate the LCD

monitor mount in the direction of the locking knob

to make the LCD monitor fixation bolt accessible.

3. Attach the LCD monitor to the LCD monitor mount.

•Align the Ímarks on the monitor and monitor

mount. If necessary, you can also mount the LCD

monitor facing the other way around.

•Tighten the LCD monitor fixation bolt using the hex

wrench for 0.64 cm, 1/4" screws.

4. Attach the LCD attachment unit to the handle unit.

•Align the attachment mount on the LCD attachment

unit to the handle unit’s front accessory mount.

•Tighten the locking knob firmly.

5. Rotate the LCD monitor 90 degrees toward the

handle unit.

6. Connect the LCD monitor to the camera’s VIDEO

terminal using the UN-5 Unit Cable.

•Align the Ímarks on the cable’s plugs and

terminals.

7. Put the cable though the LCD attachment unit’s

cable clamp.

•If necessary, adjust the position of the cable so that

it does not get in the picture or obstruct the view.

LCD Monitor

LM-V1 LM-V2

LCD Attachment Unit LA-V1 N—

LA-V2 —N

햴햳

햶

햵

햸

햷

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Kamerazubehör Handbücher

Canon

Canon Powershot S2 IS - Powershot S2 IS 5MP Digital... Montageanleitung

Canon

Canon Cine-Servo Bedienungsanleitung

Canon

Canon EF 600mm 1:4.0 L USM Bedienungsanleitung

Canon

Canon DU-82 Bedienungsanleitung

Canon

Canon TIMER REMOTE CONTROLLER TC-80N3 Bedienungsanleitung

Canon

Canon PowerShot SX1 IS Montageanleitung

Canon

Canon Macro ring lite MR-14EX II Bedienungsanleitung

Canon

Canon RC-IP100 Bedienungsanleitung

Canon

Canon Servo EE Finder Bedienungsanleitung

Canon

Canon Macro Twin Light MT-26EX-RT Montageanleitung

Canon

Canon XF705 Bedienungsanleitung

Canon

Canon EF Adapter XL Bedienungsanleitung

Canon

Canon BG-R10 Bedienungsanleitung

Canon

Canon FU-1000 Bedienungsanleitung

Canon

Canon Film Chamber 250 Bedienungsanleitung

Canon

Canon 540EZ - Speedlite - Hot-shoe clip-on Flash Bedienungsanleitung

Canon

Canon AE Motor Drive FN Bedienungsanleitung

Canon

Canon WFT-E7 Bedienungsanleitung

Canon

Canon VB-M40 Bedienungsanleitung

Canon

Canon LC-2 Bedienungsanleitung

Canon

Canon 540EZ - Speedlite - Hot-shoe clip-on Flash Bedienungsanleitung

Canon

Canon LIFE SIZE CONVERTER EF Bedienungsanleitung

Canon

Canon HG-100TBR Montageanleitung

Canon

Canon REMOTE SWITCH RS-80N3 Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung

Custom Brackets

Custom Brackets Digital PRO-M Bedienungsanleitung

Vivo

Vivo MOUNT-LT01C Bedienungsanleitung