Canon EF-S 17-85mm f/4-5.6 IS USM Bedienungsanleitung

EF-S17-85mm f/4-5.6 IS USM

Instruction

ENG

COPY

ENG-1

Thank you for purchasing a Canon product.

The Canon EF-S17-85mm f/4-5.6 IS USM lens

is a compact and lightweight standard zoom

lens equipped with an Image Stabilizer. It has

been developed for EOS cameras*

compatible with EF-S lenses.

¡“IS” stands for Image Stabilizer.

¡“USM” stands for Ultrasonic Motor.

Features

1. The Image Stabilizer gives the equivalent

effect of a shutter speed three stops faster*.

2. Aspheric lens element for excellent imaging

performance.

3. Ultrasonic motor (USM) for quick and quiet

autofocusing.

4. Manual focusing is available after the subject

comes into focus in autofocus mode (ONE

SHOT AF).

5. A truly round aperture hole results in a nicer

background blur.

*Based on [1/(focal length x 1.6)] second. Generally,

it requires a shutter speed [1/focal length] second or

faster to prevent camera shake (in 35mm format.

With an EF-S lens, it would be [1/(focal length x

1.6)] second).

Conventions used in this instruction

Warning to prevent lens or camera

malfunction or damage.

Supplementary notes on using the lens

and taking pictures.

As of February 2010, only the EOS 7D, EOS 50D,

EOS 40D, EOS 30D, EOS 20D, EOS 20Da, EOS

REBEL T2i/550D, EOS REBEL T1i/500D, EOS

REBEL XSi/450D, EOS REBEL XS/1000D, EOS

DIGITAL REBEL XTi/400D DIGITAL, EOS

DIGITAL REBEL XT/350D DIGITAL, and EOS

DIGITAL REBEL/300D DIGITAL are compatible

with EF-S lenses.

COPY

ENG-2

aSafety Precautions

•Do not look at the sun or a bright light source

through the lens or camera. Doing so could

result in loss of vision. Looking at the sun directly

through the lens is especially hazardous.

•Whether it is attached to the camera or not, do

not leave the lens under the sun without the

lens cap attached. This is to prevent the lens from

concentrating the sun’s rays, which could cause a

fire.

Handling Cautions

•If the lens is taken from a cold environment into

a warm one, condensation may develop on the

lens surface and internal parts. To prevent

condensation in this case, first put the lens into an

airtight plastic bag before taking it from a cold to

warm environment. Then take out the lens after it

has warmed gradually. Do the same when taking

the lens from a warm environment into a cold one.

•Do not leave the lens in excessive heat such as in

a car in direct sunlight. High temperatures can

cause the lens to malfunction.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such changes or

modifications should be made, you could be required to stop

operation of the equipment.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Consult the dealer or an experienced radio/TV technician for

help.

This Class B digital apparatus complies with Canadian ICES-003.

COPY

ENG-3

Nomenclature

Distance scale (→5)

Contacts (→4)

Focus mode switch

(→4)

Image stabilizer switch (→6)

Hood mount

(→9)

Lens mount index (→4)

Filter mounting

thread (→8)

Zoom ring (→5)

Focusing ring (→4)

Zoom position index (→5)

For detailed information, reference page numbers are provided in parentheses (→ **).

COPY

ENG-4

Mounting and Detaching the Lens

See your camera’s instructions for details on

mounting and detaching the lens.

¡After detaching the lens, place the lens with the

rear end up to prevent the lens surface and

electrical contacts from getting scratched.

¡If the contacts get soiled, scratched, or have

fingerprints on them, corrosion or faulty

connections can result. The camera and lens

may not operate properly.

¡If the contacts get soiled or have fingerprints on

them, clean them with a soft cloth.

¡If you remove the lens, cover it with the dust

cap. To attach it properly, align the lens mount

index and the ¢index of the dust cap as shown

in the diagram, and turn clockwise. To remove

it, reverse the order.

2Setting the Focus Mode

After autofocusing in ONE SHOT AF mode, focus

manually by pressing the shutter button halfway

and turning the focusing ring. (Full-time manual

focus)

To shoot in autofocus (AF) mode, set the focus

mode switch to AF.

To use only manual focusing (MF), set the focus

mode switch to MF, and focus by turning the

focusing ring. The focusing ring always works,

regardless of the focus mode.

COPY

ENG-5

3Zooming

To zoom, turn the lens’ zoom ring.

Be sure to finish zooming before focusing.

Changing the zoom ring after focusing can affect

the focus.

Infinity compensation mark

Distance index

Infinity Compensation Mark

To compensate for shifting of the infinity focus

point that results from changes in temperature.

The infinity position at normal temperature is the

point at which the vertical line of the L mark is

aligned with the distance indicator on the

distance scale.

For accurate manual focusing on subjects at

infinity distance, look through the viewfinder while

rotating the focusing ring.

COPY

ENG-6

5Image Stabilizer

You can use the image stabilizer in AF or MF mode.

1Set the STABILIZER

switch to .

¡If you are not going to

use the image stabilizer

function, set the switch to

2When you press the

shutter button

halfway, the Image

Stabilizer will start

operating.

¡Make sure the image in

the viewfinder is stable,

then press the shutter

button the rest of the

way down to take the

picture.

The image stabilizer in this lens

is effective for hand-held shots

under the following conditions.

In semi-darkened areas such

as indoors or outdoors at night.

In locations where flash

photography is prohibited, such as

art museums and theater stages.

¡In situations where your

footing is uncertain.

In situations where fast shutter

settings cannot be used.

COPY

ENG-7

Image Stabilizer

¡When you use a tripod, the Image Stabilizer

should be turned off to save battery power.

¡The stabilizer is equally effective for hand-held

photography and photography with a monopod.

¡The image stabilizer function also operates

when the lens is used with an Extension Tube

EF12 ll or EF25 ll.

¡Pictures may look distorted after being taken

depending on the camera, but this doesn't affect

shooting.

¡If you set the camera’s Custom Function to

change the assigned button to operate the AF,

the Image Stabilizer will operate when you press

the newly assigned AF button.

¡The Image Stabilizer cannot compensate for a

blurred shot caused by a subject that moved.

¡Set the STABILIZER switch to when you

are taking pictures using the Bulb setting (long

exposures). If the STABILIZER switch is set

to , the image stabilizer function may

introduce errors.

¡The Image Stabilizer might not be fully effective

in the following cases:

• You move the camera for a panned shot.

• You shoot while riding on a bumpy road.

¡The Image Stabilizer consumes more power

than normal shooting, so fewer shots can be

taken if you use the function.

¡The image stabilizer operates for about two

seconds even when your finger is off the shutter

button. Do not remove the lens while the

stabilizer is in operation. This will cause a

malfunction.

COPY

ENG-8

6Filters (Sold Separately)

You can attach filters to the filter mounting

thread on the front of the lens.

¡Only one filter may be attached.

¡If you need a polarizing filter, use the Canon

Circular Polarizing Filter (67mm).

¡To adjust the polarizing filter, first remove the

lens hood.

Extension Tubes (Sold Separately)

You can attach Extension Tube EF12 II or EF25

II for magnified shots. The shooting distance and

magnification are shown below.

Camera-to-Subject Magnification

Distance (mm)

Near Far Near Far

EF12 II 17mm Incompatible

85mm 222 656 0.43×0.14×

EF25 II 17mm Incompatible

85mm 189 368 0.72×0.33×

Manual focusing is recommended for accurate

focusing.

COPY

ENG-9

8Hood (Sold Separately)

The EW-73B hood can keep unwanted light out of the lens, and also protects the lens from rain,

snow, and dust.

To attach the hood, align the hood’s attachment position mark with the red dot on the front of the

lens, then turn the hood as shown by the arrow until the lens' red dot is aligned with the hood's stop

position mark.

The hood can be reverse-mounted on the lens for storage.

¡Part of the picture may be blocked if the hood is not attached properly.

¡When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent deformation, do not

grasp the rim of the hood to turn it.

¡When using the camera's built-in flash, remove the hood. Otherwise part of the flash may be obstructed.

COPY

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon EF 8-15mm f/4L Fisheye USM Bedienungsanleitung

Canon

Canon FISH-EYE EF15mm 1:2.8 Bedienungsanleitung

Canon

Canon EF 100mm f/2.8L MARCO IS USM Bedienungsanleitung

Canon

Canon Ultrasonic EF50mm f/1.2L USM Bedienungsanleitung

Canon

Canon EF-M 22mm f/2 STM Bedienungsanleitung

Canon

Canon EF 28-80mm 1:2.8-4.0L USM Bedienungsanleitung

Canon

Canon EF14mm f/2.8L II USM Bedienungsanleitung

Canon

Canon EF500mm f/4L IS II USM Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon YJ12x6.5B IRS-A Bedienungsanleitung

Canon

Canon EF-S 60mm f/2.8 Macro USM Bedienungsanleitung

Canon

Canon CN20x50 Series Bedienungsanleitung

Canon

Canon EF55-200mm f/4.5-5.6 II USM Bedienungsanleitung

Canon

Canon EF 200mm f/2L IS USM Bedienungsanleitung

Canon

Canon EF-M 55-200mm f/4.5-6.3 IS STM Bedienungsanleitung

Canon

Canon Digital Camera Lens Benutzerhandbuch

Canon

Canon RF-S 10-18mm F4.5-6.3 IS STM Bedienungsanleitung

Canon

Canon EF-S24mm f/2.8 STM Bedienungsanleitung

Canon

Canon 9519B008AA Bedienungsanleitung

Canon

Canon EF 17-35mm 1:2.8 L USM Bedienungsanleitung

Canon

Canon EF 75-300mm f/4-5.6 III USM Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF 28-70mm 1:2.8 L USM Bedienungsanleitung

Canon

Canon EF28-135mm f/3.5-5.6 IS USM Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung