Canon RF 16mm F2.8 STM Bedienungsanleitung

ENG

Instructions

ENG-1

Thank you for purchasing a Canon product.

Canon RF16mm F2.8 STM is a ultra-wide lens

for use with EOS R series cameras.

z“STM” stands for Stepping Motor.

Conventions used in these instructions

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

Camera Firmware and

Camera Applications

Please use the latest versions of firmware and

applications with the camera in use. For details on

whether the firmware and applications in use are the

latest version or not, and for details on updating them,

please check the Canon website.

If the camera’s* firmware is not a compatible

version, the following limitations will apply.

zMagnified view functionality is not available.

zIn some cases, the camera malfunction may

occur.

* Applies to the following camera models:

EOS R and EOS RP

ENG-2

Precautions to ensure that the camera is used

safely. Read these precautions thoroughly. Make

sure all details are observed in order to prevent

risks and injury to the user and other people.

Warning

Details pertaining to risks that may

result in death or serious injury.

zDo not look directly at the sun or other strong

light sources through a lens. This may result in

loss of sight.

zDo not leave a lens in the sun without the lens

cap attached. The lens may concentrate entering

sunlight and cause a malfunction or fire.

Caution

Details pertaining to risks that may

result in injury or damage to other

objects.

zDo not leave the product in places exposed to

extremely high or low temperatures. The product

may cause burns or injury when touched.

Safety Precautions

ENG-3

Handling Precautions

zDo not leave the product in excessive heat such as

in a car in direct sunlight. High temperatures can

cause the product to malfunction.

zIf the lens is taken from a cold environment into a

warm one, condensation may develop on the lens

surface and internal parts. To prevent condensation

in this case, first put the lens into an airtight

plastic bag before taking it from a cold to warm

environment. Then take out the lens after it has

warmed gradually. Do the same when taking the

lens from a warm environment into a cold one.

zPlease also read any lens related handling

precautions listed in your camera’s instruction

manual.

General Precautions

Shooting Precautions

When the camera recovers from the auto power off

status to the shooting-ready status, the front end of

the lens moves in both AF/MF mode and an initial

reset is performed on the focus lens.

zDo not shoot until the initial reset is completed.

zFocus again after recovering from the auto power

off status.

zTo maintain the focus position in the shooting-ready

status, set [Auto power off] to [Disable] on the

camera.

ENG-4

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such

changes or modifications should be made, you could be

required to stop operation of the equipment.

This equipment has been tested and found to comply with

the limits for a class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

CAN ICES-3 (B) / NMB-3 (B)

ENG-5

Hood mount (→ 9)

Filter mounting

thread (→ 10)

Focusing/control selector

switch (→ 7)

Lens mount index (→ 6)

Focusing/control ring (→ 7)

Contacts (→ 6)

Lens mount (→ 6)

z For detailed information, reference page numbers are provided in parentheses (→ **).

Nomenclature

ENG-6

Lens mount index

Lens release button Dust cap

Attaching the Lens

Align the lens mount indexes of the lens and

camera, and turn the lens clockwise until you

hear a click.

Detaching the Lens

Turn the lens counterclockwise while pressing

the camera’s lens release button. Detach the

lens once it has stopped turning.

Please refer to the camera’s instructions for

details.

zSet the camera’s power switch to OFF when

attaching or detaching the lens.

zAttach the lens cap before detaching the lens

from the camera.

zWhen the power switch of the camera is set

to OFF, the focus lens pushed forward is

automatically stored.* Do not detach the lens

until the lens is completely stored.

zAfter detaching the lens, place the lens with the

rear end up and attach the dust cap to prevent

the lens surface and contacts from getting

scratched. Make sure the lens and dust cap

mount indexes are aligned when attaching the

dust cap.

zContacts that are scratched, soiled, or have

fingerprints on them may result in faulty

connections or corrosion, which may lead to

malfunctions. If the contacts get soiled, clean

them with a soft cloth.

* When the lens storage is set to ON on the camera.

1. Attaching and Detaching the Lens

ENG-7

2. Focusing/control ring

The focusing/control ring can be used as either a

focusing ring or a control ring.

Focusing/control ring

Focusing/control selector switch

Use as a Focusing Ring

Set the focusing/control selector switch to

FOCUS. Set the focus mode (AF/MF) using the

camera’s menu.

To shoot in autofocus (AF) mode, set the

camera’s focus mode to AF.

To use only manual focusing (MF), set the

camera’s focus mode to MF, and focus by turning

the focusing ring (focusing/control ring).

zThis lens does not have a focus mode switch.

zDelayed focus may occur if the focusing ring

(focusing/control ring) is quickly turned.

zDo not touch the operating part in the front of

the lens while the focus lens is operating. If

external pressure is applied to the moving part,

the lens initialization may be performed to return

the focus lens to the correct position for control

purposes.

zThe lens’ focusing ring (focusing/control ring) is

electronic.

zIt is possible to set cameras that support

electronic fulltime manual focusing to constant

manual focusing when the camera is in the

operational mode. However, the camera settings

need to be changed.

zWhen AF operation is set to [ONE SHOT],

manual focus is possible after autofocusing

has been completed by continuing to press the

shutter button halfway. However, the camera

settings need to be changed.

Please refer to the camera's instructions for

details.

ENG-8

Focusing/control ring

The focusing/control ring can be used as either a

focusing ring or a control ring.

Focusing/control ring

Focusing/control selector switch

Use as a Control Ring

Set the focusing/control selector switch to

CONTROL. Set the control ring function using

the camera’s menu. The control ring can be

assigned the functions that are commonly

used with cameras, such as shutter speed and

aperture settings.

Please refer to the camera’s instructions for

details on how to use the control ring.

ENG-9

The custom lens hood reduces unwanted light that causes flare and ghosting and protects the front

of the lens from rain, snow, and dust.

3. Hood (Sold separately)

Attachment position mark

Stop position mark

Attachment position mark

Red dot

Red dotRed dot

Attaching the Hood

Align the red attachment position mark on the

hood with the red dot on the front of the lens,

and then turn the hood in the direction of the

arrow until you hear a click.

Button

Detaching the Hood

Keep your finger pressed down on the button

located on the side of the hood, and then turn

the hood in the direction of the arrow until the

attachment position mark on the hood is aligned

with the red dot on the front of the lens to detach

it.

The hood can be reverse-mounted on the lens

for storage.

zIf the hood is not attached properly, vignetting (darkening of the perimeter of the picture) may occur.

zGrasp and turn the base of the hood when attaching and detaching it. There are cases in which it may

become deformed if the hood is turned with it grasped near to the rim.

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon Digital Camera Solution Disk Version 8 Bedienungsanleitung

Canon

Canon EF-S24mm f/2.8 STM Bedienungsanleitung

Canon

Canon RF-S 18-45mm F4.5-6.3 IS STM Bedienungsanleitung

Canon

Canon EF 24mm f/2.8 IS USM Bedienungsanleitung

Canon

Canon EF 70-300mm f/4.5-5.6 IS USM Bedienungsanleitung

Canon

Canon TL-30.5 Bedienungsanleitung

Canon

Canon EF 800mm f/5.6L IS USM Bedienungsanleitung

Canon

Canon CN-E14mm T3.1 L F Bedienungsanleitung

Canon

Canon HJ21ex7.5B Bedienungsanleitung

Canon

Canon EF35mm f/1.4L II USM Bedienungsanleitung

Canon

Canon KJ17ex7.7B Bedienungsanleitung

Canon

Canon EF 35~350 mm f/3,5-5,6 L Bedienungsanleitung

Canon

Canon FK14.5-60 Bedienungsanleitung

Canon

Canon EF 28-300mm f/3.5-5.6L IS USM Bedienungsanleitung

Canon

Canon EF-S18 Bedienungsanleitung

Canon

Canon EF 100-400mm f/4.5-5.6L IS USM Bedienungsanleitung

Canon

Canon EF LENS TS-E24MM F/3.5L Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon CN-E30-300mm T2.95-3.7 LS Bedienungsanleitung

Canon

Canon EF 400mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF 200mm 1:2.8 L Bedienungsanleitung

Canon

Canon EF 35mm 1:2.0 Bedienungsanleitung

Canon

Canon FDJ-S31 Bedienungsanleitung

Canon

Canon CN-E24mm T1.5 L F Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung