Canon Perfect Binder D1 Bedienungsanleitung

654321

Color Image Reader Unit - D1/D2

SERVICE MANUAL Rev4

Product Outline

Technology

Periodic Servicing

Parts Replacement and Cleaning Procedure

Adjustment

Installation

Appendix

Application

This manual has been issued by Canon Inc. for qualied persons to learn technical theory,

installation, maintenance, and repair of products. This manual covers all localities where the

products are sold. For this reason, there may be information in this manual that does not

apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to improvements

or changes in products. When changes occur in applicable products or in the contents of this

manual, Canon will release technical information as the need arises. In the event of major

changes in the contents of this manual over a long or short period, Canon will issue a new

edition of this manual.

The following paragraph does not apply to any countries where such provisions are

inconsistent with local law.

Trademarks

The product names and company names used in this manual are the registered trademarks

of the individual companies.

not be copied, reproduced or translated into another language, in whole or in part, without the

written consent of Canon Inc.

Caution

Use of this manual should be strictly supervised to avoid disclosure of condential

information.

Explanation of Symbols

The following symbols are used throughout this Service Manual.

Symbols Explanation Symbols Explanation

Check. Remove the claw.

Check visually. Insert the claw.

Check the noise. Use the bundled part.

Disconnect the connector. Push the part.

Connect the connector. Plug the power cable.

Remove the cable/wire

from the cable guide or wire

saddle.

Turn on the power.

Set the cable/wire to the

cable guide or wire saddle.

Remove the screw.

Tighten the screw.

The following rules apply throughout this Service Manual:

1. Each chapter contains sections explaining the purpose of specic functions and the

relationship between electrical and mechanical systems with reference to the timing of

operation.

In the diagrams, represents the path of mechanical drive; where a signal name

accompanies the symbol, the arrow indicates the direction of the electric

signal.

The expression "turn on the power" means ipping on the power switch, closing the

front door, and closing the delivery unit door, which results in supplying the machine with

power.

2. In the digital circuits, '1' is used to indicate that the voltage level of a given signal is

"High", while '0' is used to indicate "Low". (The voltage value, however, differs from

circuit to circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the DRMD

signal goes on when '0'.

In practically all cases, the internal mechanisms of a microprocessor cannot be checked

in the eld. Therefore, the operations of the microprocessors used in the machines

are not discussed: they are explained in terms of from sensors to the input of the DC

controller PCB and from the output of the DC controller PCB to the loads.

The descriptions in this Service Manual are subject to change without notice for product

improvement or other purposes, and major changes will be communicated in the form of

Service Information bulletins.

All service persons are expected to have a good understanding of the contents of this Service

Manual and all relevant Service Information bulletins and be able to identify and isolate faults

in the machine.

Blank Page

Contents

0 Safety Precautions

Notes Before it Works Serving ---------------------------------------------0-2

1 Product Outline

Features (Reader) ------------------------------------------------------------1-2

Specications (Reader) ------------------------------------------------------1-2

Names of Parts (Reader) ---------------------------------------------------1-3

External View ----------------------------------------------------------------------- 1-3

Cross Section ----------------------------------------------------------------------- 1-3

Major Components ------------------------------------------------------------------------- 1-4

Reader Relay PCB ------------------------------------------------------------------------- 1-4

Features (DADF) --------------------------------------------------------------1-5

Specications (DADF) -------------------------------------------------------1-5

Names of Parts (DADF) -----------------------------------------------------1-6

External View ----------------------------------------------------------------------- 1-6

Cross Section ----------------------------------------------------------------------- 1-6

2 Technology

Technology (Reader) ---------------------------------------------------------2-2

Basic Sequence -------------------------------------------------------------------- 2-2

Basic Sequence at Power-On ----------------------------------------------------------- 2-2

Basic Sequence at Start Key ON (book mode/1 original) ------------------------ 2-2

Basic Sequence at Start Key ON (ADF mode/1 original) ------------------------- 2-2

Controls (Reader) -------------------------------------------------------------2-3

Controlling the Scanner Drive System ------------------------------------------------ 2-3

CCD -------------------------------------------------------------------------------------------- 2-4

Enlargement/Reduction ------------------------------------------------------------------- 2-6

Detecting the Size of Originals ---------------------------------------------------------- 2-6

Dirt Sensor Control ------------------------------------------------------------------------- 2-8

Image Processing -------------------------------------------------------------------------2-10

Reader Heater Control -------------------------------------------------------------------2-12

Basic Conguration (DADF) ---------------------------------------------- 2-13

Component Conguration ------------------------------------------------------2-13

Outline of Electric Circuits ---------------------------------------------------------------2-13

Sensor Layout ------------------------------------------------------------------------------2-14

Drive Conguration ---------------------------------------------------------------2-14

Outline of Operation Modes ----------------------------------------------------2-15

Outline ----------------------------------------------------------------------------------------2-15

Forward Pickup/Delivery Operation ---------------------------------------------------2-15

Forward Pickup/Reverse Delivery Operation ---------------------------------------2-16

Controls (DADF) ------------------------------------------------------------- 2-18

Document Detection -------------------------------------------------------------2-18

Outline ----------------------------------------------------------------------------------------2-18

Initial Document Size Detection --------------------------------------------------------2-19

Detecting Jams -----------------------------------------------------------------------------2-19

Power Supply ----------------------------------------------------------------------2-20

Fan -----------------------------------------------------------------------------------2-20

3 Periodic Servicing

Work of Service (Reader) ---------------------------------------------------3-2

List of Work for Scheduled Servicing -------------------------------------------------- 3-2

Action to take when replacing parts ---------------------------------------------------- 3-2

Consumables -------------------------------------------------------------------------------- 3-2

Service precautions ------------------------------------------------------------------------ 3-2

Work of service (DADF) -----------------------------------------------------3-3

When replacing the parts -------------------------------------------------------- 3-3

Periodic Servicing ------------------------------------------------------------------ 3-3

List of Work for Scheduled Servicing (DADF) -------------------------3-4

4 Parts Replacement and Cleaning Procedure

List of Parts(Reader) ---------------------------------------------------------4-2

External Covers -------------------------------------------------------------------- 4-2

Main Units --------------------------------------------------------------------------- 4-2

List of Clutchs, Solenoids, Motors, Fans, PCBs --------------------------- 4-2

List of Sensors ---------------------------------------------------------------------- 4-2

Consumable Parts Requiring Periodic Replacement and Cleaning

Points --------------------------------------------------------------------------------- 4-2

External Covers(Reader) ----------------------------------------------------4-3

Removing the Reader Left Cover ---------------------------------------------- 4-3

Removing the Reader Front Cover -------------------------------------------- 4-3

Removing the Reader Right Cover -------------------------------------------- 4-3

Removing the Reader Rear Cover -------------------------------------------- 4-4

Main Units/Parts (Reader) --------------------------------------------------4-5

Removing the CCD Unit ---------------------------------------------------------- 4-5

Action to Take after Replacing the CCD Unit ---------------------------------------- 4-7

Removing the Platen Glass ----------------------------------------------------- 4-8

Action to Take after Replacing the Platen Glass ------------------------------------ 4-8

Removing the ADF Scan Glass ------------------------------------------------ 4-9

Action to Take after Replacing the ADF Scan Glass ------------------------------- 4-9

List of Parts(DADF) --------------------------------------------------------- 4-11

External Covers ------------------------------------------------------------------- 4-11

Consumable Parts Requiring Periodic Replacement and Cleaning

Points -------------------------------------------------------------------------------- 4-11

List of Clutchs, Solenoids, Motors, Fans, PCBs --------------------------4-12

List of Sensors ---------------------------------------------------------------------4-12

External Covers (DADF) -------------------------------------------------- 4-13

Removing the Front Cover -----------------------------------------------------4-13

Removing the Rear Cover ------------------------------------------------------4-13

Removing the Feeder Cover ---------------------------------------------------4-14

Main Units (DADF) ---------------------------------------------------------- 4-15

Removing the Feed Unit --------------------------------------------------------4-15

Consumable Parts Requiring Periodic Replacement and Cleaning

Points (DADF) --------------------------------------------------------------- 4-16

Removing the Pickup Roller Unit ---------------------------------------------4-16

Removing the Separation Pad -------------------------------------------------4-17

Replacing the Stamp -------------------------------------------------------------4-17

Exchanging the Feed Roller Guide -------------------------------------------4-18

Clutch Solenoid Motor Fan PCB (DADF) ----------------------------- 4-19

Removing the ADF Motor(M1) -------------------------------------------------4-19

Removing the Release Motor(M2) --------------------------------------------4-19

Removing the Pressurization Solenoid(SL1) ------------------------------4-20

Pickup Clutch/Registration Clutch(CL1/CL2) -----------------------------4-20

Removing the ADF Driver PCB ------------------------------------------------4-21

Removing the LED PCB --------------------------------------------------------4-22

Removing the Fan ----------------------------------------------------------------4-22

Removing the Sensor(SR1,SR2,SR3) ---------------------------------------4-23

Removing the Timing Sensor(SR4) ------------------------------------------4-27

Removing the Document Set Sensor(SR5) --------------------------------4-27

Removing the Cover Open/Closed Sensor(SR6) -------------------------4-27

Removing the Last Document Detection Sensor(SR7) -----------------4-27

Removing the Document Length Sensor(SR8,SR9) ---------------------4-28

Removing the Release Motor HP Sensor(SR11) -------------------------4-28

5 Adjustment

Image position adjustment(Reader) --------------------------------------5-2

Leading Edge Non-Image Width ----------------------------------------------- 5-2

Left Non-Image Width ------------------------------------------------------------ 5-2

Overview (DADF) -------------------------------------------------------------5-3

Adjustment Method (DADF) ------------------------------------------------5-3

Adjusting the Height --------------------------------------------------------------- 5-3

Pre-check ------------------------------------------------------------------------------------- 5-3

Checking the left hinge height ----------------------------------------------------------- 5-4

Adjustment Procedure --------------------------------------------------------------------- 5-5

Adjust the height of the left hinge ------------------------------------------------------- 5-5

Check the height of the right hinge ----------------------------------------------------- 5-5

Adjust the height of the right hinge ----------------------------------------------------- 5-5

Adjusting the Perpendicularity -------------------------------------------------- 5-6

Adjusting the Read Position ----------------------------------------------------- 5-7

Adjusting the Horizontal Registration ----------------------------------------- 5-7

Adjusting the Trailing Edge Registration ------------------------------------- 5-7

Adjusting the Magnication ------------------------------------------------------ 5-7

Adjusting the White Level -------------------------------------------------------- 5-8

6 Installation

How to Utilize This Installation Procedure ------------------------------6-2

Illustrations Used in This Procedure ------------------------------------------ 6-2

Descriptions Used in This Procedure ----------------------------------------- 6-2

When Using the Contained Parts (Bundled Components in the Shipping

Carton) -------------------------------------------------------------------------------- 6-2

Symbols in the Illustration ------------------------------------------------------- 6-2

Caution During Installation --------------------------------------------------6-3

Turning OFF the Host Machine Power ----------------------------------6-3

Checking the Contents ------------------------------------------------------6-4

Installation Procedure --------------------------------------------------------6-5

Operation Check ------------------------------------------------------------ 6-16

Appendix

Service Tools ----------------------------------------------------------------------ii

Solvents and Oils ------------------------------------------------------------------------------ ii

Special Tools ------------------------------------------------------------------------------------ ii

General Circuit Diagram(DADF) -------------------------------------------- iii

General Circuit Diagram ---------------------------------------------------------------------iii

General Circuit Diagram(Reader) -------------------------------------------iv

General Circuit Diagram ------------------------------------------------------------iv

Signal Name List(Reader) -----------------------------------------------------v

Signal Name List(DADF) ------------------------------------------------------vi

Signal Name List -------------------------------------------------------------------------------vi

Safety Precautions

■Notes Before it Works Serving

0-2

Safety Precautions > Notes Before it Works Serving

Notes Before it Works Serving

Caution:

At servicing, be sure to turn off the power source according to the specied steps and

disconnect the power plug.

Caution:

Do not turn off the power switch when downloading is under way.Turning off the main

power switch while downloading is under way can disable the machine.

1Product Outline

Product Outline

■Features (Reader)

■Specications (Reader)

■Names of Parts (Reader)

■Features (DADF)

■Specications (DADF)

■Names of Parts (DADF)

Andere Handbücher für Perfect Binder D1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Kartenleser Handbücher

Canon

Canon H1 Bedienungsanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch