Canon IR5570 Series Referenzhandbuch

(1/4)

Service Bulletin

Issued by Canon Europa N.V. COPIER B/W

HARDWARE

Location:

Transfer/ Separate Corona Assembly

Subject:

Image void at 22mm intervals in main scanning direction, caused by a leak in the Transfer/ Separate Corona

Assembly

Detail:

Image void occurs at approx. 22mm intervals and ALARM CODE "300002" is displayed.

Model:

iR5570

iR6570

Ref No.:

iR6570-004

(F1-T01-0M5-10019-01)

Date:

August, 2005

P-1 Image void at 22mm intervals

[1] 22mm

iR6570-004

(2/4)

<Cause>

Since the process speed was increased starting with the iR5000 series, the output level of high voltage was also

increased;however,amarginforhighvoltageleakagewasreduced.Thiscauseshighvoltageleakagedepending

on the position to which the Corona sheet 2 is affixed, resulting in image void at 22mm intervals.

Service Work:

When the above-mentioned symptom occurs, remove the Transfer/ Separate Corona Assembly from the Main

Unit and apply the Corona sheet 2, referring to "Service Manual > 7.Image Formation > 7.10.15 Transfer/

Separation Charging Assembly".

Work procedure

1. When a 22mm interval image occurs, check "COPIER > DISPLAY > ALARM-2" in Service Mode

(Level 1) and make sure that "300002" (transfer leak) is displayed in CODE.

P-2 Transfer/ Separate Corona Assembly

[2] Position where the Corona sheet2 is applied

iR6570-004

(3/4)

2. Make sure that there is no dirt or lint in the Transfer/ Separate Corona Assembly and clean it with an air-blow

tool, etc., if any.

3. As shown in the figure below, apply the Corona sheet 2 in the vertical direction to the Metal sheet which is

located on the backside of the Transfer/ Separate Corona Assembly and has a plastic sheet.

P-3 ALARM CODE screen

[3] ALARM CODE

P-4 Area where the Corona sheet2 is applied in the Transfer/ Separete Corona Assembly

[4] Corona sheet 2 (FB2-7968)

iR6570-004

(4/4)

Standard for applying the sheet

4. Set the Transfer/ Separate Corona Assembly to the Main Unit. Copy an image and make sure that a 22mm

interval image does not occur and that "3000002" is not displayed in alarm history.

Service parts:

P-5 Standard for applying the Corona sheet2

[5] Transfer/Separate Corona Assembly

[6] Insert the Corona sheet 2 until it contacts the Lower Sheet metal.

[7] Overhead view

[8] Sheet metal

[9] Position to apply the sheet

[10] The edge of the sheet should be off to the side of the sheet metal by 0.5mm or more.

[11] The sheet should not contact the block

Part number Description Q'ty P.C.

Old 580

New FB2-7968-000 Corona sheet 2 0->1

Andere Handbücher für iR5570 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Kopierer Handbücher

Canon

Canon IMAGERUNNER 2022i Bedienungsanleitung

Canon

Canon imageRUNNER C475iFZ III Bedienungsanleitung

Canon

Canon AK1 Bedienungsanleitung

Canon

Canon iR5055 Bedienungsanleitung

Canon

Canon imageRunner 1133 Bedienungsanleitung

Canon

Canon Image Runner iRC1028i Bedienungsanleitung

Canon

Canon NP-1015 Bedienungsanleitung

Canon

Canon SmartBase MPC200 Bedienungsanleitung

Canon

Canon GP215 Bedienungsanleitung

Canon

Canon GP605 Bedienungsanleitung

Canon

Canon DADF-B1 Bedienungsanleitung

Canon

Canon iR5570 Series Referenzhandbuch

Canon

Canon iR ADV C55 i Series Administratorhandbuch

Canon

Canon iR1210 Bedienungs- und Wartungshandbuch

Canon

Canon imageCLASS MF5770 Bedienungsanleitung

Canon

Canon iR6800C Referenzhandbuch

Canon

Canon GP160F Bedienungsanleitung

Canon

Canon iR2000 Series Bedienungsanleitung

Canon

Canon imageCLASS 2200 Bedienungsanleitung

Canon

Canon NP6317 Anleitung zur Verwendung

Canon

Canon imageRUNNER 2545i Bedienungsanleitung

Canon

Canon imageRunner iR2270 Bedienungsanleitung

Canon

Canon IMAGERUNNER 7105 Bedienungsanleitung

Canon

Canon IMAGERUNNER ADVANCE C5051 Bedienungsanleitung

Beliebte Kopierer Handbücher anderer Marken

Ricoh

Ricoh FW740 Bedienungsanleitung

Minolta

Minolta CF910 Bedienungsanleitung

Ricoh

Ricoh B003 Bedienungsanleitung

Xerox

Xerox EC70 Bedienungsanleitung

Oce

Oce 9800 Bedienungsanleitung

Olivetti

Olivetti d-Copia 1800 Bedienungsanleitung

Minolta

Minolta Di181 Bedienungsanleitung

Telecrane

Telecrane F25 Bedienungsanleitung

Xerox

Xerox WorkCentre Pro 40 Bedienungsanleitung

Sharp

Sharp AR-5015 N Bedienungsanleitung

Ricoh

Ricoh Di-C1 Bedienungsanleitung

Mita

Mita MIP-2400 Handbuch

Sharp

Sharp AL-2061 Bedienungsanleitung

Muratec

Muratec MFX-C2280 Bedienungsanleitung

Ricoh

Ricoh FT5034C Bedienungsanleitung

Minolta

Minolta EP4000 Bedienungsanleitung

Ricoh

Ricoh V-C3 Installationsanleitung

Triumph Adler

Triumph Adler DCC 2526 Handbuch