Canon EOS REBEL K2 3000V DATE Bedienungsanleitung

INSTRUCTIONS

English

Thank you for purchasing a Canon product.

The EOS REBEL K2 (DATE) / 3000V (DATE) is a very compact

autofocus, single-lens reflex camera. It can be used for a wide

variety of subjects and situations with fully automatic and user-

controlled shooting modes.

Read this Instructions and familiarize yourself with your new camera

before taking pictures.

Also read “Handling Cautions” on page 4 to prevent camera

malfunction and damage.

Keep this instruction booklet handy for easy reference.

Before Using Your Camera

•Before shooting an important event, be sure to take test shots

to make sure the camera operates properly.

•EOS cameras have a lens mount for dedicated operation

(autofocusing, exposure control, etc.) with Canon EF lenses.

Using a non-Canon EF lens with an EOS camera may not

result in proper camera or lens operation. Note that the

warranty does not cover any camera malfunction or damage

occurring with the use of non-Canon products.

Conventions Used in this Instructions

•The <l> icon indicates the Main Dial.

•All operation procedures described in this booklet assume that

the Mode Dial is set to a mode except <:>. Before

proceeding with any operation, be sure that the Mode Dial is

set to a shooting mode.

•Reference page numbers are indicated by (p.∗∗).

•The camera control icons and markings used in this booklet

correspond to the actual icons and markings found on the

camera.

•The (˜) and (∫) icons indicate that the respective function

remains in effect for 4 and 6 sec. respectively after the button

is released.

Contents

Symbols

The Caution symbol alerts you to actions to prevent

shooting problems.

The Note symbol gives supplemental information.

Conventions Used in this Instructions ................................2

Handling Cautions ..............................................................4

Nomenclature .....................................................................6

Before You Start...................................................11

Installing the Batteries......................................................11

Checking the Battery Level...............................................12

Mounting and Detaching a Lens.......................................13

How the Shutter Button Works .........................................14

=Loading and Unloading Film ........................................15

¢Midroll Rewind ......................................................16

Fully Automatic Shooting...................................17

Since everything is automatic, all you do is press the

shutter button.

User-Controlled Shooting...................................27

You can set the desired shutter speed or aperture value to

obtain the exposure you want. You take control of the

camera.

Reference .............................................................44

Handling Cautions

Camera Care and Storage

•The camera is a precision instrument. Do not drop it or subject it to

physical shock.

•The camera is not waterproof and should not be used in wet

conditions or underwater. If the camera gets wet, take it to your

nearest Canon dealer as soon as possible. If small amounts of

water splash onto the camera, wipe it with a clean dry cloth. If the

camera is exposed to salty air, wipe it thoroughly with a slightly

damp cloth.

•Do not leave the camera in places prone to excessive heat such as

in a car on a sunny day. Excessive heat can cause the camera to

malfunction.

•The camera contains precision electronic circuitry. Never attempt to

disassemble the camera.

•Use only a blower brush to blow away any dust on the lens,

eyepiece, mirror, focusing screen, film compartment, etc. Do not

clean the camera body or lens with any cleaner containing an

organic solvent. For stubborn dirt, consult your nearest Canon

dealer.

•The shutter curtains are extremely thin. Use only a blower to clean

them. Be careful not to blow air too forcefully on the shutter

curtains. The shutter curtains can be easily deformed or damaged.

Also, when loading and unloading film, be careful not to touch the

shutter curtains.

•Do not touch the electrical contacts with your fingers. Otherwise

corrosion may develop on the contacts, resulting in improper

camera operation.

•If the camera is not to be used for an extended period, remove the

battery. Store the camera in a well-ventilated, cool, dry place.

During the storage period, press the shutter button to release the

shutter a few times once in a while.

•Avoid storing the camera in a laboratory, cabinet, etc., where

corrosive chemicals are present.

•If you have not used the camera for some time or are planning to

take shots you will not want to lose (overseas vacation, etc.), have

the camera checked by your Canon dealer beforehand, or check

for yourself that the camera components are working properly.

LCD Displays

By their nature, LCD displays react more slowly at low

temperatures, and may appear dark at high temperatures. The

display will return to normal at room temperature.

Batteries

•Before installing the batteries, wipe the battery contacts to remove

any fingerprints and smudges. This is to prevent faulty connections

and corrosion.

•Never disassemble or recharge the batteries. Also, never store a

battery in high-temperature places or short circuit the battery

contacts or toss a battery into a fire.

•Although the batteries work well even at low temperatures, battery

performance may decline slightly at freezing temperatures. In such

a case, keep spare batteries warm in a pocket, etc., and use and

warm the batteries alternately.

How Low Battery Levels Affect Camera Operation

On the LCD panel, if the <π> icon blinks or it is not displayed, a

proper exposure can still be obtained as long as the shutter

releases. However, when the battery level is low, film advance and

auto rewind might stop midway or not work at all and <π> icon

may blink on the LCD panel. After the batteries are replaced with

new ones, film advance will be possible and film rewind can resume

by pressing the <¢> button.

Lens Electrical Contacts

After detaching the lens from the camera, put

on the lens caps or put down the lens with

the rear end up to avoid scratching the lens

surface and electrical contacts.

Contacts

Nomenclature

Mode Dial (p.10)

<l> Main Dial

Shutter button (p.14)

Grip / Battery

compartment

(p.11)

*Remote control

sensor / Self-timer/

*Remote control

lamp (p.24/23/24)

Built-in flash /

AF-assist beam

(p.43/19)

Red-eye reduction lamp

(p.22)

Flash-sync contact

Hot shoe

Strap

mount

(p.7)

<M> Flash button

(p.43)

Focusing ring (p.30)

Zooming ring

Lens release

button (p.13)

Focus mode switch

(p.13)

<£>

Film plane

mark

Body cap (p.13)

•Reference page numbers are indicated by (p.∗∗).

*DATE Model only

**With an EX-series Speedlite.

<\>

Function button

(p.22, 25, 26,

39, 41, 42)

LCD

panel

(p.8)

<3> AF point

selection button

(p.28)

Eyecup (p.24)

Back cover

<j> AE lock (p.40) /

**FE lock button

<∑> Aperture value setting /

Exposure compensation /

*SET button (p.36/38/26)

Battery compartment

cover release lever (p.11)

Guide hole

Viewfinder eyepiece

<¢> Midroll rewind button

(p.16)

Film check

window

Tr ipod socket

Back

cover

release

lever

(p.15)

Battery compartment

cover (p.11)

<^> Film advance mode /

Self-timer/*Remote control button

(p.31/23/24)

Attaching the Strap

Pass the end of the strap through the

camera’s strap mount from the bottom. Then

pass it through the strap’s buckle as shown

in the illustration. Pull the strap to make sure

it does not slip out of the buckle.

•The eyepiece cover is also attached to the

strap. (p.24)

Eyepiece cover

Nomenclature

LCD Panel

Film advance

mode

<J> Single frame

<H> Continuous

shooting

<´> Self-timer/

Remote control

<?> Manual focus

<>> Function pointer

AF point mark

<=> Film mark Exposure level indicator

Exposure compensation amount

AEB level

Red-eye reduction lamp-on indicator

Film transport indicator

Battery level mark

<;> Date

<D>

ISO film speed

<F>

Red-eye reduction

<<> Multiple

exposures

<L> AEB

DATE Model

Frame counter

Multiple-exposure setting

Self-timer operation

Remote control operation

Non-DATE Model

Aperture value

Red-eye reduction setting

AEB amount

Date

Shutter speed

ISO film speed

Date

**FE lock

**With an EX-series Speedlite.

•The actual display will show only the

applicable items.

Viewfinder Information

AF points (7)

<n>

Focus

confirmation light

<j> AE lock /

**FE lock

AEB in progress

<M> Flash-ready

**Improper FE lock

warning

Shutter speed

**FE lock

Focusing screen

Exposure level indicator

Exposure compensation

amount

Red-eye reduction

lamp-on indicator

<|>

**High-speed sync

(FP flash)

AF point mark

Aperture value

AEB level

OFF

Full Auto

Nomenclature

Mode Dial

The dial is divided into two zones.

1Basic Zone

Fully automatic mode where

the camera takes care of

everything.

Y:Full Auto (p.18)

Basically, all you do is point

and shoot.

Image Zone (p.20)

Fully automatic modes for a

particular subject.

U:Portrait

I:Landscape

O:Close-up

P:Sports

A:Night Portrait

S:Flash off

2Creative Zone

Semi-automatic and manual

modes enable you to take

control of the camera to

obtain the desired result.

T:Program AE (p.32)

R:Shutter-priority AE

(p.34)

E:Aperture-priority AE

(p.35)

W:Manual exposure

(p.36)

Q:Automatic Depth-of-

field AE (p.37)

3:: OFF

Andere Handbücher für EOS REBEL K2 3000V DATE

Inhaltsverzeichnis

Andere Canon Digitalkamera Handbücher

Canon

Canon CR-S700R Bedienungsanleitung

Canon

Canon PowerShot SD100 Bedienungsanleitung

Canon

Canon PowerShot G10 - Digital Camera - Compact Bedienungsanleitung

Canon

Canon PowerShot ELPH 180 Bedienungsanleitung

Canon

Canon WP-DC39 Bedienungsanleitung

Canon

Canon CR-N500 Service-Handbuch

Canon

Canon S50 - PowerShot S50 5MP Digital Camera Bedienungsanleitung

Canon

Canon EOS RP Montageanleitung

Canon

Canon Sure Shot AF-10 Date Bedienungsanleitung

Canon

Canon PowerShot G7X Mark III Bedienungsanleitung

Canon

Canon AE-1 Bedienungsanleitung

Canon

Canon 2663B001 Bedienungsanleitung

Canon

Canon PowerShot SD1200 IS Digital ELPH Bedienungsanleitung

Canon

Canon FTb Bedienungsanleitung

Canon

Canon PowerShot G1 Bedienungsanleitung

Canon

Canon PowerShot SX420 IS Bedienungsanleitung

Canon

Canon PowerShot A520 Bedienungsanleitung

Canon

Canon 40D Installationsanleitung

Canon

Canon EOS Rebel SL1 18-55mm IS STM Kit Bedienungsanleitung

Canon

Canon PowerShot A300 Bedienungsanleitung

Canon

Canon EOS R10 Bedienungsanleitung

Canon

Canon DIGITAL IXUS vEOS D30 Montageanleitung

Canon

Canon Powershot SX520 HS Bedienungsanleitung

Canon

Canon PowerShot D10 Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Samsung

Samsung SCC-C4253 Bedienungsanleitung