Canon EOS Series Bedienungsanleitung

Inhaltsverzeichnis

Andere Canon Digitalkamera Handbücher

Canon

Canon 1901B017 Bedienungsanleitung

Canon

Canon PowerShot A100 Bedienungsanleitung

Canon

Canon EOS 7D Mark II (G) Bedienungsanleitung

Canon

Canon EOS EOS 300D Kurzanleitung

Canon

Canon PowerShot SX620 HS Bedienungsanleitung

Canon

Canon EOS REBEL XS EOS REBEL XS Bedienungsanleitung

Canon

Canon EOS Digital Rebel Bedienungsanleitung

Canon

Canon 2807B005 Bedienungsanleitung

Canon

Canon EOS M10 Bedienungsanleitung

Canon

Canon 4460B003 Bedienungsanleitung

Canon

Canon II B Leitfaden

Canon

Canon EOS-1 Montageanleitung

Canon

Canon POWERSHOT IXUS100IS Bedienungsanleitung

Canon

Canon WP-DC49 Bedienungsanleitung

Canon

Canon EOS ELAN7E Bedienungsanleitung

Canon

Canon EOS M3 Bedienungsanleitung

Canon

Canon Digital IXUS 500HS Bedienungsanleitung

Canon

Canon PowerShot G15 Bedienungsanleitung

Canon

Canon POWERSHOT A2300 Bedienungsanleitung

Canon

Canon Powershot S60 Bedienungsanleitung

Canon

Canon EOS 20D Digital Bedienungsanleitung

Canon

Canon POWERSHOT S5IS Bedienungsanleitung

Canon

Canon WP-Dc22 Bedienungsanleitung

Canon

Canon PowerShot ELPH 100 HS IXUS 115 HS Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Nikon

Nikon Coolpix 100 Bedienungsanleitung

1

© 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited.

EOS

Step-by-Step Setup Guide

Wireless File TransmiTTer

linked shoT mode

2

EOS Wireless File Transmitter

Linked Shot Setup

Master Camera Initial Setup

Overview

In Linked Shot mode one EOS WFT-equipped

camera is set up as the master with the remaining

WFT-equipped cameras set up as slaves. You can

connect up to 10 slaves. The master can trigger the

slaves simultaneously or with intervals and/or de-

lays based on your preference and camera settings.

No other equipment or software is necessary.

1Turn on the camera with WFT unit attached.

Note that the WFT requires its own battery.

Press the MENU button on the camera, then

navigate to the Tool menu that lists WFT set-

tings. Select [WFT settings].

2Under WFT settings, elect [Connection wizard].

3Under Select communication method, select

[LinkedShot]. Select [OK].

3

4Under Linked Shooting settings, select [Mas-

ter]. Select [OK].

5You should see the [Busy...] screen at right.

Leave the master camera set to this screen

while you continue to set up the slaves as

described below.

Slave Camera Setup

1Turn on the camera with the WFT unit attached.

(The WFT requires its own battery.) Navigate to

the Tool menu that contains the WFT settings

menu. Select [WFT Settings].

2Under WFT settings, select [Connection wiz-

ard].

4

4Under Linked Shooting settings, select [Slave].

Select [OK].

3Under Select communication method, select

[LinkedShot]. Select [OK].

1The Linked Shooting settings screen on the

master camera should look like the screen at

right. The number you see will depend on how

many slaves you have correctly set up.

Select [OK] to connect to the slave(s).

5You should see the screen at right.

Select [OK] to connect to the master camera.

Repeat this ve-step procedure for each

additional slave you wish to link.

Master Camera Final Setup

5

2Each of the cameras will conrm their

connection. Masters will conrm that they are

connected to the slave(s).

Select [OK] to conrm and exit the menu.

Slaves will conrm that they are

connected to the master camera.

Select [OK] to conrm and exit the menu.

When you have nished using Linked Shot

mode, return to the WFT settings menu to select

[Disconnect.]

How to Disconnect

To reconnect:

1. Begin with the same cameras you originally

set-up.

2. Set the master camera from [Disconnect] to

[LinkedShot].

3. Set all slaved cameras from [Disconnect] to

[LinkedShot].

How to Reconnect

© 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited.