Canon IXUS 265 HS Bedienungsanleitung
ENGLISH
Getting Started
CEL-SV3JA210
2
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera Battery Pack
NB-11LH
Battery Charger
CB-2LFE
Wrist Strap* Getting Started
(this guide)
Warranty System
Booklet
* For attachment instructions, refer to the Camera User Guide. See below for
download instructions.
•A memory card is not included.
Compatible Memory Cards
No memory card is included. Purchase one of the following kinds of card
as needed. These memory cards can be used, regardless of capacity. For
details on the number of shots and recording time per memory card, see
“Specications” in the downloadable Camera User Guide.
• SD memory cards*
• SDHC memory cards*
• SDXC memory cards*
* Cards conforming to SD standards. However, not all memory cards have been veried
to work with the camera.
Manuals and Software
You can download manuals and software from the following URL.
http://www.canon.com/icpd/
With a computer connected to the Internet, access the above
URL.
Access the site for your country or region.
For instructions on how to install the software, refer to the
Camera User Guide available for download.
Adobe Reader is required to view the manuals.
3
Initial Preparations
Camera User Guide
This manual covers the following topics:
Basic instructions, from initial preparations to shooting and playback
Instructions on sending images and using Web services via Wi-Fi
Instructions on installing the software and importing images
Other instructions, about all camera features
Software Instruction Manual
This manual describes how to use the software.
Initial Preparations
Charging the Battery Pack
1Insert the battery pack.
After aligning the pmarks on the battery
pack and charger, insert the battery pack
by pushing it in ( ) and down ( ).
2Charge the battery pack.
Plug the power cord into the charger, then
plug the other end into a power outlet.
The charging lamp turns orange, and
charging begins.
When charging is nished, the lamp turns
green. Remove the battery pack.
For details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to “Specications” in the
downloadable Camera User Guide.
4
Initial Preparations
Inserting the Battery Pack and Memory Card
1Open the cover.
Slide the cover ( ) and open it ( ).
2Insert the battery pack.
While pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
To remove the battery pack, press the
battery lock in the direction of the arrow.
3Check the card’s write-protect
tab and insert the memory card.
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
Insert the memory card facing as shown
until it clicks into the locked position.
To remove the memory card, push it in
until you feel a click, and then slowly
release it.
4Close the cover.
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
If the cover will not close, make sure you
inserted the battery pack facing the right
way in step 2.
Terminals Battery
Lock
Terminals
5
Initial Preparations
Setting the Date and Time
1Turn the camera on.
Press the ON/OFF button.
The [Date/Time] screen is displayed.
2Set the date and time.
Press the <q><r> buttons to choose an
option.
Press the <o><p> buttons to specify
the date and time.
When nished, press the <m> button.
3Set the home time zone.
Press the <q><r> buttons to choose
your home time zone.
Press the <m> button when nished.
After a conrmation message, the setting
screen is no longer displayed.
To turn off the camera, press the ON/OFF
button.
6
Initial Preparations
Changing the Date and Time
To adjust the date and time once you have set it, do the following.
1Press the <n> button.
2Move the zoom lever to choose the [3] tab.
3Press the <o><p> buttons to choose [Date/Time], and then press the
<m> button.
4 Follow step 2 in “Setting the Date and Time” to adjust the settings.
5Press the <n> button.
Display Language
Change the display language as needed.
1Enter Playback mode.
Press the <1> button.
2Access the setting screen.
Press and hold the <m> button, and
then immediately press the <n>
button.
Press the <o><p><q><r> buttons to
choose a language, and then press the
<m> button.
7
Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specic scenes,
simply let the camera determine the subject and shooting conditions.
1Turn the camera on and enter
[] mode.
Press the ON/OFF button.
Set the mode switch to [4].
Press the <m> button, press the
<o><p> buttons to choose [ ], and
then press the <m> button again.
Press the <o><p> buttons to choose
[], and then press the <m> button.
2Compose the shot.
To zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto)
as you watch the screen, and to zoom
away from the subject, move it toward
<j> (wide angle).
3Shoot.
Shooting Still Images
Press the shutter button lightly ( ).
The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus. Press the shutter
button all the way down ( ).
Shooting Movies
Press the movie button to start shooting,
and press it again to stop.
8
Trying the Camera Out
Viewing
1Enter Playback mode.
Press the <1> button.
2Browse through your images.
To view the previous or next image, press
the <q><r> buttons.
Movies are identied by a [ ] icon.
To play movies, go to step 3.
3Play movies.
Press the <m> button, press the
<o><p> buttons to choose [ ], and
then press the <m> button again.
Playback now begins, and after the movie
is nished, [ ] is displayed.
To adjust the volume, press the <o><p>
buttons.
Erasing Images
To erase the image you chose in step 2, do the following. Note that erased
images cannot be recovered.
1Press the <m> button, press the <o><p> buttons to choose [a], and
then press the <m> button again.
2After [Erase?] is displayed, press the <q><r> buttons to choose
[Erase], and then press the <m> button.
9
© CANON INC. 2014
Andere Handbücher für IXUS 265 HS
1
Inhaltsverzeichnis
Andere Canon Digitalkamera Handbücher
Canon
Canon EOS-1D Mark II Digial Bedienungsanleitung
Canon
Canon EOS 5D Mark II Installations- und Betriebshandbuch
Canon
Canon EOS Rebel T3 Installationsanleitung
Canon
Canon PowerShot S3 IS Digital Camera Montageanleitung
Canon
Canon PowerShot A3200 IS Bedienungsanleitung
Canon
Canon EOS C100 Gebrauchsanweisung
Canon
Canon 8120A001 - PowerShot G3 Digital Camera Bedienungsanleitung
Canon
Canon PowerShot SD750 Digital ELPH Bedienungsanleitung
Canon
Canon Power Shot G7X Bedienungsanleitung
Canon
Canon EOS 850 Bedienungsanleitung
Canon
Canon PowerShot A410 Benutzerhandbuch
Canon
Canon PowerShot G12 Bedienungsanleitung
Canon
Canon WP-DC31 Bedienungsanleitung
Canon
Canon POWERSHOT A1300 Bedienungsanleitung
Canon
Canon PowerShot SX410 IS Bedienungsanleitung
Canon
Canon EOS Rebel SL1 18-55mm IS STM Kit Bedienungsanleitung
Canon
Canon PowerShot S200 Bedienungsanleitung
Canon
Canon PowerShot ELPH 180 Bedienungsanleitung
Canon
Canon RebelT3i EOS 600D Bedienungsanleitung
Canon
Canon EOS-1D Mark II Digial Bedienungsanleitung
