Canon NEW F-1 Bedienungsanleitung

Canon NEW F-1 Service manual

Page 1

CANON NEW F-1

SERVICE MANUAL

EXPLODED VIEWS

AND

PARTS LIST

CANON INC. JAPAN

Canon NEW F-1 Service manual

Page 2

Contents

1. SWITCH POSITION AND NOMENCLATURE............................................................................................... 4

2. COVERS ................................................................................................................................................................ 6

3. FRONT PANEL UNIT ATTACHMENT AND REMOVAL .......................................................................... 10

4. FRONT BODY .................................................................................................................................................... 12

5. UPPER BODY (WINDING SIDE)..................................................................................................................... 16

6. TUNGSTEN CABLE ADJUSTMENT .............................................................................................................. 19

7. SPOOL ................................................................................................................................................................. 20

8. SPROCKET ......................................................................................................................................................... 22

9. CHECKS AND ADJUSTMENTS...................................................................................................................... 23

10. UPPER BODY (REWIND SIDE)................................................................................................................... 31

11. LOWER BODY (I) .......................................................................................................................................... 34

12. LOWER BODY LUBRICATION.................................................................................................................. 38

13. LOWER BODY (II) ........................................................................................................................................ 39

14. ELECTRICAL ADJUSTMENTS .................................................................................................................. 42

15. FRONT PANEL UNIT ASSEMBLY AND DISASSEMBLY...................................................................... 50

16. EYE LEVEL FINDER .................................................................................................................................... 61

17. MOISTURE RESISTANT TREATMENT ................................................................................................... 66

18. WATER RESISTANT TREATMENT.......................................................................................................... 68

19. SHUTTER SPEED VARIATIONS................................................................................................................ 70

20. SERVICE TOOLS LIST................................................................................................................................. 71

21. TROUBLESHOOTING CHARTS ................................................................................................................ 74

22. PARTS LISTS.................................................................................................................................................. 89

Canon NEW F-1 Service manual

Page 3

Introdu tion

The NEW F-1 is the base of a completel new Integrated Functional S stem. It is based on

the original F-1 but utilizing man advances in electronics, precision machining and precision

optics made since the original F-1 was developed ten ears ago.

The following considerations should be kept in mind when repairing the New F-1:

1. To maintain complete interchangeabilit between the camera bod and the s stem

accessories, repair personnel must understand the interfaces (mechanical

and electronic) between the bod and accessories. The must also be familiar with

repair standards, checking, adjustment and tools maintenance procedures.

2. Preventive maintenance (lubrication, adjustment and parts replacement) are

necessar to insure the reliabilit of the NEW F-1.

Spe ial Repair Instru tions

1. Man of the electrical contacts in the camera are molded into plastic insulators.

When making solder connections, the soldering time should be kept as short as

possible.

2. 3% silver solder should be used to solder the IC's.

3. Man bearing balls are used in the winding mechanism. Be careful during assembl

and disassembl to insure that no balls get lost in surrounding mechanisms.

4. When the rewind crank is not installed, if the rewind shaft is pushed down past a

certain point it becomes impossible to open the back cover without removing

certain parts that normall need not be removed. This results in lost time.

5. Be sure that the elastic connectors used to connect the flexible and rigid circuit

boards are kept clean and free of contamination.

6. The water and moisture proofing complicates man repair procedures. Take care

that the are correctl performed

7. If the tungsten cable is kinked or fra ed, repair is difficult and time-consuming. It is

much more cost efficient to be careful to not damage the cable than to repair or

replace it.

8. The correct adjustment of the AV AE shutter speed indicator output resistor (RM

TV2) and the TV AE aperture determination resistor (RAE) are basic to maintaining

s stem interchangeabilit .

Canon NEW F-1 Service manual

Page 4

1. Swit h position and nomen lature

Name Operation

SW1 Metering Switch ON: Metering activated

SW2 Release Switch ON: Starts Release sequence

SW4 Count Switch OFF: Shutter exposure timing starts

SW5 Winding Complete Switch OFF: Winding complete

SW6 Stop-down (S.D.) Switch ON: Stopped-down (ganged with SWll1)

SW7 Self Timer Switch ON: Self timer activated

SW8 Batter Check Switch ON: Batter Check

SWll Lens A-M Switch. ON: Lens set to "a" mark

SW1l' Stop-down switch OFF: Lens stopped down

SW12 Bulb switch OFF: "Bulb" shutter speed

SW14 Timer Switch ON: Timer Activated

SW15 Lamp Switch ON: Viewfinder illumination on

SW16 X S nc Switch ON: 1st curtain open; OFF: Winding complete

SW16' Safet Switch ON: Mirror up; OFF: Mirror down

SW17 Film End Switch ON: No film on take-up spool

SW18 2nd Curtain Switch OFF: When 2nd curtain starts

Canon NEW F-1 Service manual

Page 5

1) SW12 and SW18 Relationship

2) SW16 and SW16' Relationship

1st curtain

X contact must turn off after the 2nd curtain

closes and before winding is complete.

3) SW11, SW6 and SW11’ Relationship

Lens "A"

Lens "M"

Max.

S.D.

Max.

S.D.

SW11

ON OFF

SW6,1

ON OFF ON OFF

Max: Open aperture S.D.:

Stopped down

Canon NEW F-1 Service manual

Page 6

2. Covers

Numbers 1-37

Canon NEW F-1 Service manual

Page 7

Disassembly Notes Assembly and Adjustment Notes

1. Remove the smooth face screw (3)

and shutter button (6) with tool

(CY9-6131-000).

2. Be careful not to lose detent

ball (7)-2 inside the camera.

3. The shutter dial cap (9) is glued in place.

4. Seals (8)(14)(29) and (30) are

available in more than one thick

ness to insure correct sealing.

5. When the rewind crank (22) is not

installed, don't push the rewind

shaft all the wa down into its

holder. (If it is, time will be

lost in unnecessar work, because

of the click spring.)

6. Press the opening safet stopper

while removing the left top cover

7. (35).

Assembly and Adjustment Notes

1. Put Diabond into the winding

lever shaft hole before final

installation of the screw (3).

2. Lubricate the shutter button

shaft (6) and the interior or

the release lock (7) with GE-C9

[See Water-resistant treatment

(XIX)].

3. Put Lozoid in the detent groove

of the release lock (7).

4. Place teflon washer (8) under the lock lever

(7). Use a washer that is 0.3mm thicker than

the "A" dimension shown below. (Water

resistance)

A = l.l-(a-b) mm

Washer t = A +0.3mm

5. The teflon washer (14) used under the shutter

dial should be 0.1mm thicker than the "B"

dimension shown below. (Water resistance)

B .= 0.5-(a-b)

Washer t = B +0.1mm

6. When installing the shutter dial, align the notch

in (15) and the pin in the shutter dial ring (13)

with the hole in the top cover. The shutter

must be set to "A" before the dial is installed.

Note: Numbers in parentheses in the text correspond to circled

numbers one page 6. Disassemble in normal order and reassemble in

reverse order.

Canon NEW F-1 Service manual

Page 8

Assembly and Adjustment Notes

7. Adjust the rewind crank (22) slip torque b changing the friction washer (21).

Torque Limits: 35 to 55 gcm.

8. Lubricate both sides of friction spring (20) with PL-015.

9. Hold the rewind fork. Raise the rewind crank knob and turn in

the rewind direction. The clutch should engage within one half

turn,

10. To install the ASA Dial, set the SV wiper wiper pin as shown and align the "1/2"

on the exposure compensation dial with the index.

11. Check the difference in height between the rewind crank bushing and the "A"

and "B" surfaces. Install a slightl thinner washer as indicated below.

11.1. Washer (30) "A" Difference Check at four points.

Ex: Difference Washer "t"

0.15mm --- 0.1mm

0.2mm --- 0.2mm

0.1mm --- No washer

11.2. Washer (29) “B” Difference

Ex: Difference Wacher “t”

0.55mm --- 0.5mm

0.4mm --- 0.4mm

0.35mm --- No washer

Note: Numbers in parentheses in the text correspond to circled numbers

on page 6. Disassemble in normal order and reassemble in reverse

order.

Canon NEW F-1 Service manual

Page 9

Assembly and Adjustment Notes

12.

SV Brush Adjustment

12.1.

Set the SV (ASA.) dial to ASA 6400 -1/3.

12.2.

Set the exposure compensation dial at "1".

12.3.

Check the position of the brush through the P.C. terminal hole.

Note: Shining the light source (a penlight or the illuminator D or M) through the

loupe makes the brush position easier to see.

12.4. Look at the underside of the SV board to check if the brush

if the brush is positioned as shown on the ASA 6400 -1/3 pad.

Note: It must sta on the pad at both extremes of dial pla .

12.5. Set the dial to ASA 6400 and check that the meter doesn't

var suddenl either up or down.

12.6. If the adjustment is not correct adjust the SV board eccentric.

13. After installing the top cover (35), check the operation of the NORMAL-TIMER-LAMP

switch.

It should switch from one function to the next as shown.

Canon NEW F-1 Service manual

Page 10

3. Front panel unit atta hment and removal

Disassembly Notes

To remove the front panel unit, remove the

following parts.

1Remove the top covers, mount

apron and bottom cover.

2Bod coverings (front)

3Beeper plate

4Removing the Mg2 latch lever

makes the AE joint gear easier

to remove.

5AE Joint Gear

Position the main diaphragm lever so the

gear can be removed.

6Tripod Socket

7Diaphragm Stricker lever

8Batter Chamber Cover

9Pentaprism rails

10 Unsolder eleven leads to main

circuit board.

11 X s nc contact ellow cord

12 Batter Check contact

Assembly and Adjustment Notes

1AE Joint Gear and AE Coupler

Installation

1.1 Lubricate the joint gear and

coupler shafts with Astro-Oil-

MIL-G.

1.2 Align the raised portion of

the coupler gear with the

mounting screw as shown.

1.3 Align the mark on the joint

gear with the positioning

hole as shown.

2Front Panel Unit Installation

2.1 Lubricate the marked parts of the

mirror charge and signal levers (in the

bod ) with Lozoid.

2.2 Wind until the curtain edge is

approximatel in the center of

the frame.

2.3 In this semi-wound condition,

do not move the signal lever

(Fig. 1) or Intermediate signal

lever (Fig. 4, next page).

Note: Numbers in parentheses in the text correspond to circled

numbers on page 6. Disassemble in normal order and reassemble in

reverse order.

Andere Handbücher für NEW F-1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Digitalkamera Handbücher

Canon

Canon PowerShot S95 Bedienungsanleitung

Canon

Canon EOS 100D Installationsanleitung

Canon

Canon ivy CLIQ 2 Bedienungsanleitung

Canon

Canon EOS 3 Bedienungsanleitung

Canon

Canon IXUS 145 Bedienungsanleitung

Canon

Canon EOS REBEL XS EOS REBEL XS Bedienungsanleitung

Canon

Canon IXUX 240 HS Bedienungsanleitung

Canon

Canon POWERSHOT A610 Benutzerhandbuch

Canon

Canon EOS-1D C Bedienungsanleitung

Canon

Canon Digital IXUS55 Bedienungsanleitung

Canon

Canon POWERSHOT ELPH 1301S Bedienungsanleitung

Canon

Canon A510 - PowerShot 3.2MP Digital Camera Bedienungsanleitung

Canon

Canon EOS R Bedienungsanleitung

Canon

Canon PowerShot SX10 IS Handbuch

Canon

Canon PowerShot 350 Bedienungsanleitung

Canon

Canon EOS 20Da Bedienungsanleitung

Canon

Canon EOS 5D Mark 2 s Betriebsanleitung

Canon

Canon EOS Rebel Ti Bedienungsanleitung

Canon

Canon PowerShot A560 Montageanleitung

Canon

Canon EOS 750D Installationsanleitung

Canon

Canon EOS 7D Mark II (G) Bedienungsanleitung

Canon

Canon RebelT3i EOS 600D Bedienungsanleitung

Canon

Canon PowerShot SX200 IS Bedienungsanleitung

Canon

Canon IXUS 145 Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Samsung

Samsung SCC-C4253 Bedienungsanleitung