Canon PowerShot G1 Gebrauchs- und Pflegehandbuch

PowerShot G1 Firmware Update Installation Instructions

Firmware version 1.0.0.3

Precautions

Use the dedicated AC power supply Compact Power

Adapter CA-560 for firmware update.

Do not shut off the power during the firmware writing

operation. A power failure during the firmware writing

operation will disable the camera.

Do not open the CF card slot cover or press any camera

buttons during the firmware writing operation.

Please read, understand and observe all precautions and instructions before attempting to update the

PowerShot G1's firmware. If you are not confident that you can install the firmware update by yourself,

then by all means allow the Canon Customer Support Center or the local Canon Distributor listed in the

Canon European Warranty System List (EWS) to assist you.

Files in the "DC97" folder

Verify that the files listed followings match those in your "DC97" folder.

The files should be contained in the "MISC" folder of the "DC97" folder.

File name Capacity

A.IMG 424960 byte

B.IMG 216448 byte

B1.IMG 28886 byte

B10.IMG 20960 byte

B11.IMG 13016 byte

B12.IMG 16510 byte

B13.IMG 20346 byte

B14.IMG 20636 byte

B15.IMG 22056 byte

B16.IMG 29710 byte

B17.IMG 31982 byte

B18.IMG 14830 byte

B19.IMG 7164 byte

B2.IMG 6506 byte

B20.IMG 11912 byte

B21.IMG 10084 byte

B22.IMG 13396 byte

B23.IMG 4500 byte

B24.IMG 4332 byte

B25.IMG 20674 byte

B26.IMG 2474 byte

B27.IMG 832 byte

B3.IMG 28986 byte

B4.IMG 17338 byte

B5.IMG 26682 byte

B6.IMG 27583 byte

B7.IMG 27583 byte

B8.IMG 15360 byte

B9.IMG 2038 byte

P.DAT 1599 byte

romupd.exe 19128 byte

romupd.ini 58 byte : Depends on your system this file size would differ a little.

X1.IMG 4528 byte

X2.IMG 546 byte

X3.IMG 546 byte

X4.IMG 7650 byte

X5.IMG 3244 byte

PowerShot G1 firmware update procedures

PROCEDURE 1 : Copy the "DC97" folder to the CF card

Two methods are provided for copying the "DC97" folder to the CF card.

Method (A): IF YOU HAVE A CF CARD READER, PC CARD READER* OR NOTEBOOK

TYPE PC* WITH A PC CARD SLOT

1. Insert the formatted CF card into the card reader.

2. Copy the "DC97" folder from the downloaded data to the CF card.

* If you use a PC card reader or a notebook type PC with a PC card slot, a CF-to-PC card adapter is

required.

Method (B): IF YOU DO NOT HAVE ANY OF THE ABOVE CARD READING DEVICES

1. Insert the CF card into the PowerShot G1, and connect it to the PC* with an USB cable or a

serial cable**.

2. Double-click the "UploadFirmware" in the "G1_FirmUpdate1003" folder, and follow the

instructions so that the "DC97" folder can be copied onto the CF card in the PowerShot G1***.

*See the PowerShot G1 Software Starter Guide for information on compatible personal

computers.

** Serial Interface Cable IFC-200PCS (optional) for IBM PC/AT compatible computer, or

Serial Interface Cable IFC-200MC (optional) for Macintosh is required for serial

connection.

PC Connector Kit (optional) may be required in some locations.

*** The Main Dial of the PowerShot G1 should be set to (PC) mode while the PC is

connected.

When you attempt to transfer the data to the CF card in the PowerShot G1 with the

"UploadFirmware", do not open the CF card slot cover, turn the Main Dial or turn the

power off until the data transfer is completed.

Any of the above operations during data transfer will disable the firmware update.

USB Connection

Serial Connection

PROCEDURE 2 : Start the camera with Replay mode

1. Ensure the camera is powered from the AC power supply.

2. Insert the CF card in the camera.

3. Then switch the Main Dial to (Replay)

PROCEDURE 3 : Select "Firm Update" from the menu

1. Press the "MENU" button to display the Play menu.

2. Select "Firm Update" from the menu.

If the "Firm Update" option is not available from the menu, then the "DC97" folder was not copied

correctly to the CF card. If this is the case then download firmware again and then return to

PROCEDURE 1.

PROCEDURE 4 : Press the "SET" button, and select "OK"

1. Press the "SET" button.

2. And select "OK".

* Figure will differ depending on the current firmware of your camera.

[Current version] -> 1.0.0.3

Note:

Some PowerShot G1 cameras have already been updated to firmware version 1.0.0.3 prior to

shipment. If you see the message "Updated already" in the LCD monitor, it means that firmware

version 1.0.0.3 is already installed in your camera.

Please verify the following before downloading the archived firmware file.

Please see the inner side of the battery cover.

If you can see a red stamp "2" there, firmware version 1.0.0.3 has already been installed in your

camera.

PROCEDURE 5 : Press the "SET" button

Press the "SET" button to start writing the firmware update.

Precautions :

If you wait more than 5 minutes between Procedures 4 and 5, the camera will cancel the menu

and turn off using its Auto Power Off function when you press the MENU button.

In this case the firmware is not updated. To update the firmware please return to PROCEDURE

Once the update starts, the indicator LED will cycle from to .ORANGE GREEN

The message shown here will be displayed on the LCD

monitor until the firmware update is complete.

The update will take approximately 90 seconds.

Do not turn the power off during the firmware writing

operation.

Do not open the CF card slot cover or press any camera

buttons during the firmware writing operation.

The indicator lamp goes off and the camera restarts automatically in Replay mode. This completes

firmware update.

You can select [Firm Update] from Play menu after updating.

Once you were successed the firmware update you can not do

again.

The message shown the right will be displayed on the LCD

monitor.

If you wish to use the CF card for taking pictures, initialize the card.

Verifying the firmware update

Please connect your PowerShot G1 to a compatible personal computer (as listed in the PowerShot G1

Software Starter Guide) in which at least one of the following programs has been properly installed:

Canon Digital Camera TWAIN driver version 3.4 or higher (for Windows®), together with a

TWAIN-compliant image editor such as Adobe® Photoshop® LE (supplied with the PowerShot G1).

ZoomBrowser EX 2.4 or higher (for Windows®)

Canon Digital Camera Photoshop® plug-in module version 3.4 or higher (for Mac OS), together with

a compatible image editor such as Adobe® Photoshop® LE (supplied with the PowerShot G1).

ImageBrowser 1.4 or higher (for Mac OS)

Each of these programs has a "Camera Settings" window that displays the version number of the connected

camera's firmware. Please refer to the PowerShot G1 Software Starter Guide for instructions on installing

these programs and locating the "Camera Settings" information.

If the PowerShot G1 Firmware Update has been installed correctly, the version number in the "Camera

Settings" window will be 1.0.0.3.

If you hear constant beeping

If you hear constant beeping from the camera while updating the firmware, there is a possibility that the

firmware updating procedure has failed.

Please disconnect the plug of Compact Power Adapter from household outlet to stop the beep. And then

remove the Battery Pack from the camera if it is mounted.

If you hear constant beeping, please consult :

The Canon Customer Support Center mentioned in the

Camera User Guide : For USA and all other

regions, except Europe

Local Canon Distributor listed in the Canon European

Warranty System List (EWS) : For Europe

Andere Handbücher für PowerShot G1

Inhaltsverzeichnis

Andere Canon Digitalkamera Handbücher

Canon

Canon Digital IXUS II s Bedienungsanleitung

Canon

Canon EOS 50D Bedienungsanleitung

Canon

Canon PowerShot SD20 Digital ELPH Bedienungsanleitung

Canon

Canon pmn Montageanleitung

Canon

Canon ivy REC Bedienungsanleitung

Canon

Canon DIGITAL IXUS vEOS D30 Bedienungsanleitung

Canon

Canon PowerShot A95 Bedienungsanleitung

Canon

Canon PowerShot A450 Montageanleitung

Canon

Canon imagePROGRAF iPF9400S Gebrauchsanweisung

Canon

Canon REBEL T1I EOS 500D Bedienungsanleitung

Canon

Canon EOS 10D Digital Bedienungsanleitung

Canon

Canon PowerShot A410 Montageanleitung

Canon

Canon EOS-1D C Bedienungsanleitung

Canon

Canon XA25 Handbuch

Canon

Canon EOS 7D Mark II (G) Bedienungsanleitung

Canon

Canon PowerShot SX10 IS Bedienungsanleitung

Canon

Canon POWERSHOT ELPH 520HS Bedienungsanleitung

Canon

Canon PowerShot ELPH 110 HS Bedienungsanleitung

Canon

Canon Powershot S80 Bedienungsanleitung

Canon

Canon EOS 7D Mark II (G) Bedienungsanleitung

Canon

Canon PowerShot SX500 IS Bedienungsanleitung

Canon

Canon Camera Bedienungsanleitung

Canon

Canon PowerShot ELPH 170 IS IXUS 170 Bedienungsanleitung

Canon

Canon PowerShot ELPH 120 IS Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Samsung

Samsung SCC-C4253 Bedienungsanleitung