Canon PowerShot SX60 HS Bedienungsanleitung
CEL-SV5RA210
ENGLISH
Getting Started
2
Package Contents
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera Battery Pack
NB-10L
(with terminal cover)
Battery Charger
CB-2LCE
Neck Strap* Lens Cap*
(with cord)
* For attachment instructions, refer to the Camera User Guide that can be downloaded
from the Canon website.
• Printed matter is also included.
• A memory card is not included.
Compatible Memory Cards
No memory card is included. Purchase one of the following kinds of card
as needed. These memory cards can be used, regardless of capacity. For
details on the number of shots and recording time per memory card, see
“Specifications” in the downloadable Camera User Guide.
• SD memory cards*1
• SDHC memory cards*1*2
• SDXC memory cards*1*2
*1 Cards conforming to SD standards. However, not all memory cards have been
verified to work with the camera.
*2 UHS-I memory cards are also supported.
3
Manuals and Software
Manuals and Software
You can download manuals and software from the following
URL:
http://www.canon.com/icpd/
With a computer connected to the Internet, access the above URL.
Access the site for your country or region.
Adobe Reader is required to view the manuals.
You can also download software from the website. For instructions on
downloading and installing the software, refer to the Camera User Guide
available for download.
Initial Preparations
Initial Preparations
Charging the Battery Pack
1Insert the battery pack.
Remove the cover from the battery pack,
align the Smarks on the battery pack
and charger, and insert the battery pack
by pushing it in (1) and down (2).
2Charge the battery pack.
Plug the power cord into the charger,
then plug the other end into a power
outlet.
The charging lamp turns orange, and
charging begins.
When charging is finished, the lamp turns
green. Remove the battery pack.
For details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to “Specifications” in the
downloadable Camera User Guide.
(1)
(2)
4
Initial Preparations
Inserting the Battery Pack and Memory Card
1Open the cover.
Slide the switch (1) and open the cover (2).
2Insert the battery pack.
Holding the battery pack with the
terminals (1) facing as shown, press the
battery lock (2) in the direction of the
arrow and insert the battery pack until the
lock clicks shut.
If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
locks when inserted.
To remove the battery pack, press the
battery lock in the direction of the arrow.
3Check the card’s write-protect
tab and insert the memory card.
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
Insert the memory card with the label (1)
facing as shown until it clicks into place.
To remove the memory card, push it in
until you feel a click, and then slowly
release it.
(2)
(1)
(1)
(2)
(1)
5
Initial Preparations
4Close the cover.
Lower the cover in the direction of the
arrow and press it until it clicks into the
closed position.
If the cover will not close, make sure you
inserted the battery pack facing the right
way in step 2.
Using the Screen
Open the screen (1) and rotate it toward
the lens 180° (2).
Close the screen in this orientation (3).
Setting the Date and Time
1Turn the camera on.
Press the ON/OFF button.
The [Date/Time] screen is displayed.
2Set the date and time.
Press the [q][r] buttons to choose an
option.
Press the [o][p] buttons to specify the
date and time.
When finished, press the [m] button.
(1)
(2)
(3)
6
Initial Preparations
3Specify your home time zone.
Press the [q][r] buttons to choose your
home time zone.
Press the [m] button when finished.
After a confirmation message, the setting
screen is no longer displayed.
To turn off the camera, press the ON/OFF
button.
Changing the Date and Time
To adjust the date and time once you have set it, do the following.
1Press the [n] button.
2Move the zoom lever to choose the [3] tab.
3Press the [o][p] buttons to choose [Date/Time], and then press the
[m] button.
4Follow step 2 in “Setting the Date and Time” to adjust the settings.
5Press the [n] button.
Display Language
Change the display language as needed.
1Enter Playback mode.
Press the [1] button.
2Access the setting screen.
Press and hold the [m] button, and then
immediately press the [n] button.
Press the [
o
][
p
][
q
][
r
] buttons to choose
a language, and then press the [
m
] button.
7
Trying the Camera Out
Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1Turn the camera on and enter
[] mode.
Press the ON/OFF button.
Set the mode dial to [ ].
2Compose the shot.
To zoom in and enlarge the subject, move
the zoom lever toward [i] (telephoto) as
you watch the screen, and to zoom away
from the subject, move it toward [j]
(wide angle).
3Shoot.
Shooting Still Images
Press the shutter button lightly (1).
The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus. Press the shutter
button all the way down (2).
If [Raise the flash] is displayed, lift the
flash with your finger to prepare it for use.
If you prefer not to use the flash, push it
down with your finger, into the camera.
Shooting Movies
Press the movie button to start shooting,
and press it again to stop.
(1) (2)
8
Trying the Camera Out
Viewing
1Enter Playback mode.
Press the [1] button.
2Browse through your images.
To view the previous or next image, press
the [q][r] buttons.
Movies are identified by a [ ] icon.
To play movies, go to step 3.
3Play movies.
Press the [m] button to access the
movie control panel, press the [q][r]
buttons to choose [ ], and then press
the [m] button again.
Playback now begins, and after the movie
is finished, [ ] is displayed.
To adjust the volume, press the [o][p]
buttons.
Erasing Images
To erase the image you chose in step 2, do the following. Note that erased
images cannot be recovered.
1Press the [a] button.
2After [Erase?] is displayed, press the [q][r] buttons to choose [Erase],
and then press the [m] button.
To ensure proper operation of this product, use of genuine Canon
accessories is recommended.
- Interface Cable IFC-400PCU
- Stereo AV Cable AVC-DC400ST
- HDMI Cable HTC-100
9
© CANON INC. 2014
Andere Handbücher für PowerShot SX60 HS
9
Inhaltsverzeichnis
Andere Canon Digitalkamera Handbücher
Canon
Canon EOS 600D Bedienungsanleitung
Canon
Canon IXUS 115 HS Bedienungsanleitung
Canon
Canon EOS 6D Installationsanleitung
Canon
Canon Powershot SD40 Bedienungsanleitung
Canon
Canon PowerShot A720 IS Bedienungsanleitung
Canon
Canon POWERSHOT A80 - Digital Camera - 4.0... Kurzanleitung
Canon
Canon EOS-1D Bedienungsanleitung
Canon
Canon CDI-M186-010 Bedienungsanleitung
Canon
Canon Sure Shot WP-1 Bedienungsanleitung
Canon
Canon XC15 Bedienungsanleitung
Canon
Canon EOS C500 PL Bedienungsanleitung
Canon
Canon PowerShot A530 Montageanleitung
Canon
Canon EF Bedienungsanleitung
Canon
Canon Powershot Pro70 Montageanleitung
Canon
Canon Powershot SX520 HS Bedienungsanleitung
Canon
Canon PowerShot A1000 IS Bedienungsanleitung
Canon
Canon EOS 20D Digital Bedienungsanleitung
Canon
Canon EOS REBEL T5I EOS 700D Bedienungsanleitung
Canon
Canon GL-2 Bedienungsanleitung
Canon
Canon Legira HFM52 Bedienungsanleitung
