Canon Card Reader-C1 Bedienungsanleitung
REVISION 0
FY8-13H2-000
COPYRIGHT
©
2001 CANON INC. 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Card Reader-C1
Card Reader-D1
JAN. 2001
COPYRIGHT
©
2001 CANON INC. 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical
theory, installation, maintenance, and repair of products. This manual covers all localities
where the products are sold. For this reason, there may be information in this manual
that does not apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to
improvements or changes in products. When changes occur in applicable products or in
the contents of this manual, Canon will release technical information as the need arises.
In the event of major changes in the contents of this manual over a long or short period,
Canon will issue a new edition of this manual.
The following paragraph does not apply to any countries where such provisions are
inconsistent with local law.
Trademarks
The product names and company names used in this manual are the registered
trademarks of the individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this
manual may not be copied, reproduced or translated into another language, in whole or in
part, without the written consent of Canon Inc.
Caution
Use of this manual should be strictly supervised to avoid disclosure of confidential information.
COPYRIGHT © 2001 CANON INC.
Printed in Japan
Imprimé au Japon
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001
i
INTRODUCTION
1 Symbols Used
This documentation uses the following symbols to indicate special information:
Symbol Description
Indicates an item requiring care to avoid combustion (fire).
Indicates an item prohibiting disassembly to avoid electric shocks or problems.
Indicates an item requiring disconnection of the power plug from the electric
outlet.
Indicates an item intended to provide notes assisting the understanding of the
topic in question.
Memo
Indicates an item of reference assisting the understanding of the topic in ques-
tion.
REF.
Provides a description of a service mode.
Provides a description of the nature of an error indication.
Refers to the Copier Basics Series for a better understanding of the contents.
Indicates an item of a non-specific nature, possibly classified as Note, Caution,
or Warning.
Indicates an item requiring care to avoid electric shocks.
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001
ii
INTRODUCTION
2 Outline of the Manual
This Service Manual provides basic facts and figures need to service the Card Reader-C1/
D1 in the field, and consists of the following:
Chapter 1 Introduction outline, specifications, types of cards
Chapter 2 Electrical System outline of card detection
Chapter 3 Installation site requirements and installation procedure
Appendix general circuit diagram
The following rules apply throughout this Service Manual:
1. Each chapter contains sections explaining the purpose of specific functions and the
relationship between electrical and mechanical systems with reference to the timing
of operation.
In the diagrams, represents the path of mechanical drive; where a signal name
accompanies the symbol , the arrow indicates the direction of the electric sig-
nal.
The expression “turn on the power” means flipping on the power switch, closing the
front door, and closing the delivery unit door, which results in supplying the machine
with power.
2. In the digital circuits, ‘1’ is used to indicate that the voltage level of a given signal is
“High,” while ‘0’ is used to indicate “Low.” (The voltage value, however, differs from
circuit to circuit.) In addition, the asterisk (*) as in “DRMD*” indicates that the
DRMD signal goes on when ‘0’.
In practically all cases, the internal mechanisms of a microprocessor cannot be
checked in the field. Therefore, the operations of the microprocessors used in the ma-
chines are not discussed: they are explained in terms of from sensors to the input of
the DC controller PCB and from the output of the DC controller PCB to the loads.
The descriptions in this Service Manual are subject to change without notice for
product improvement or other purposes, and major changes will be communicated in
the form of Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this
Service Manual and all relevant Service Information bulletins and be able to identify
and isolate faults in the machine.
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001
iii
CONTENTS
1 Installation Procedure ......................... 3-1 2 Product Composition .......................... 3-1
CHAPTER 3 INSTALLATION
Contents
CHAPTER 1 INTRODUCTION
1 Outline ................................................ 2-1 2 Card Detention Circuit........................ 2-2
1 Outline ................................................ 1-1
2 Specifications ...................................... 1-2
2.1 Card Reader Unit ....................... 1-2
3 Names of Parts .................................... 1-3
3.1 Card Reader ............................... 1-3
4 Types of Cards .................................... 1-4
4.1 Group Card ................................ 1-4
4.2 Maintenance Card ...................... 1-5
CHAPTER 2 ELECTRICAL SYSTEM
1 General Circuit Diagram ................... A-1
APPENDIX
COPYRIGHT
©
2001 CANON INC. CANON CARD READER-C1/D1 REV.0 JAN. 2001
CHAPTER 1
INTRODUCTION
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001
CHAPTER 1 INTRODUCTION
1-1
1 Outline
A card reader is designed to read data stored on a plastic card (coded group No.) by an
optical or magnetic means to enable control of prints made by its host machine according to
group.
The PDL output may be controlled by setting IDs and ID Nos. (Each card is given a
unique ID, and ID Nos. are registered in user mode.)
A card reader may be either of the following two depending on how it may be installed:
• Card Reader-C1 (external installation type)
• Card Reader-D1 (built-in type)
Features
1. The output (number of prints) may be monitored in terms of individual groups and all
groups. In addition, setting a unit price will enable monitoring of expenses on an indi-
vidual or total basis.
2. A limit may be imposed on the number of prints that may be made by each group.
3. A specific group may be denied access.
4. A group whose output count is ‘0’ is skipped when statistics are collected, reducing the
work.
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001
CHAPTER 1 INTRODUCTION
1-2
2 Specifications
2.1 Card Reader Unit
Item Description
Reading method By moving optical or magnetic mechanism
Maximum number of groups 200 groups (optical), 300 groups (magnetic)
The number of groups depends on the specifications of the host ma-
chine.
Upper limit by group Depends on host machine.
Unit price range 0.01 to 60.0
• If between 0.01 and 9.99, in increments of 0.01.
• If between 10.0 and 60.0, in increments of 0.1.
Minimum reading speed 3 cm/sec
Operating environment Temperature: +15 to +30°C
Humidity: 5% to 80%
Power supply 5 VDC (supplied by host machine)
Power consumption 0.5 W max.
Dimensions Card Reader-C1: 88 (W) ×100 (D) ×32 (H) mm
Card Reader-D1: 77 (D) ×85 (D) ×22 (H) mm
Weight Card Reader C1: 130 g
Card Reader-D1: 70 g
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Canon Druckerzubehör Handbücher
Canon
Canon FAX-L350 Bedienungsanleitung
Canon
Canon BW PCL PRINTER KIT-J1 Bedienungs- und Wartungshandbuch
Canon
Canon imagePROGRAF RU-63 Bedienungsanleitung
Canon
Canon Duplex Unit-A1 Bedienungs- und Wartungshandbuch
Canon
Canon UFRII LT PRINTER KIT-J2 Bedienungs- und Wartungshandbuch
Canon
Canon DADF-AV1 Bedienungsanleitung
Canon
Canon Finisher-R1 Service-Handbuch
Canon
Canon Color Send Kit-Y1 Bedienungsanleitung
Canon
Canon imagePROGRAF SD-33 Bedienungsanleitung
Canon
Canon BW PCL PRINTER KIT-J1 Bedienungs- und Wartungshandbuch
Canon
Canon DADF-N1 Bedienungsanleitung
Canon
Canon imagePROGRAF RU-61 Bedienungsanleitung
Canon
Canon imagePROGRAF iPF830 Bedienungsanleitung
Canon
Canon FINISJER-E1 Bedienungsanleitung
Canon
Canon Finisher-R1 Service-Handbuch
Canon
Canon TonerRobot EP-27 Bedienungsanleitung
Canon
Canon Paper Deck-V1 Bedienungsanleitung
Canon
Canon imagePROGRAF RU-42 Bedienungsanleitung
Canon
Canon Finisher-T1 Bedienungsanleitung
Canon
Canon Finisher-T1 Bedienungsanleitung
