Canon 7215 - LV XGA LCD Projector Bedienungsanleitung

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

LV-5210/7215/7210

EXPAND SERIAL COMMAND

FUNCTIONAL SPECIFICATION

Page1

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

CONTENTS

1. Overtview

2. Serial Interface Specification

2.1 Communication Specification

2.2 Connection

3. Note for communications

4. Name Definition

5. Functional Execution Command table

5.1 Image Command Table

5.2 PC Control Command Table

5.3 VIDEO Control Command Table

5.4 Input Control Command Table

5.5 Screen Command Table

5.6 Lamp Command Table

5.7 Sound Command Table

5.8 Setting Command Table

6. Status Read Command Table

6.1 IMAGE Status Read Command table

6.2 PC Status Read Command Table

6.3 VIDEO Status Read Command Table

6.4 Input Status Read Command Table

6.5 Screen Status Read Command Table

6.6 Lamp Status Read Command Table

6.7 Sound Status Read Command Table

6.8 Setting Status Read Command Table

6.9 Other Status Read Command Table

7. Error Code Table

8. Functional Execution Command

8.1 Format

8.2 Transfer Example

8.3 Operation Requirements

8.4 Image Command

8.4.1 CF_BRIGHT COMMAND

8.4.2 CF_CONT COMMAND

8.4.3 CF_COLOR COMMAND

8.4.4 CF_TINT COMMAND

8.4.5 CF_SHARP COMMAND

8.4.6 CAMMA COMMAND

Page2

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

8.4.7 WBAL COMMAND

8.4.8 COLTEMP COMMAND

8.4.9 PROGV COMMAND

8.4.10 IMGE COMMAND

8.4.11 CF IMAGE ADJ COMMAND

8.5 PC Control command

8.5.1 CF_FSYNC COMMAND

8.5.2 CF_TDOTS COMMAND

8.5.3 CF_CLAMP COMMAND

8.5.4 CF_H-POS COMMAND

8.5.5 CF_V-POS COMMAND

8.5.6 CF_DDOTS COMMAND

8.5.7 CF_DLINE COMMAND

8.5.8 CF_PC STORE COMMAND

8.5.9 CF_PC MODE FREE COMMAND

8.6 VIDEO Control Command

8.6.1 CF_AVDDOTS COMMAND

8.6.2 CF_AVDLINECOMMAND

8.6.3 CF_AVHPOS COMMAND

8.6.4 CF_AVVPOS COMMAND

8.6.5 CF_AVSERV COMMAND

8.7 Input Control Command

8.7.1 CF_INPUT COMMAND

8.7.2 CF_SOURCE COMMAND

8.7.3 CF_INPUT_%1_%2 COMMAND

8.7.4 CF_SYSTEM COMMAND

8.8 Screen Control Command

8.8.1 CF_SCREEN COMMAND

8.8.2 CF_FLSCREN COMMAND

8.8.3 CF_UE COMMAND

8.8.4 CF_CENT COMMAND

8.8.5 CF_KEYSTONE COMMAND

8.8.6 CF_KYSTNMODE COMMAND

8.9 Lamp Command

8.9.1 CF_LAMOPH COMMAND

8.9.2 CF_ALMP MODE COMMAND

8.10 Sound Command

8.10.1 CF_VOLUME COMMAND

8.10.2 CF_MUTE COMMAND

Page3

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

8.11 Setting Command

8.11.1 CF_BBACK COMMAND

8.11.2 CF_DISPCOMMAND

8.11.3 CF_LOGOCOMMAND

8.11.4 CF_CEILCOMMAND

8.11.5 CF_REARCOMMAND

8.11.6 CF_RCODE COMMAND

8.11.7 CF_LANGCOMMAND

8.11.8 CF_ON-STACOMMAND

8.11.9 CF_P-MANECOMMAND

8.11.10 CF_P-MANETIMECOMMAND

8.11.11 CF_FANSPEEDCOMMAND

8.11.12 KEYDISCOMMAND

8.11.13 TERMINALCOMMAND

8.11.14 STANDBYMODEOCOMMAND

8.11.15 POINTERCOMMAND

8.11.16 FDEFAULTCOMMAND

8.11.17 LOGOCAPTURECOMMAND

9. Status Read Command

9.1 Format

9.2 Transfer Example

9.3 Operation Requirement

9.4 IMAGE COMMAND

9.4.1 CR-BRIGHTCOMMAND

9.4.2 CR-CONTCOMMAND

9.4.3 CR-COLORCOMMAND

9.4.4 CR-TINTCOMMAND

9.4.5 CR-SHARPCOMMAND

9.4.6 CR-GAMMACOMMAND

9.4.7 CR-WBAL-RCOMMAND

9.4.8 CR-WBAL-GCOMMAND

9.4.9 CR-WBAL-BCOMMAND

9.4.10 CR-COLTEMPCOMMAND

9.4.11 CR-PROGVCOMMAND

9.4.12 CR-IMAGECOMMAND

9.4.13 CR-IMGGMD COMMAND

9.5 PC COMMAND

9.5.1 CR-FSYNC COMMAND

9.5.2 CR-TDOTS COMMAND

Page4

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

9.5.3 CR-CLAMP COMMAND

9.5.4 CR-H-POS COMMAND

9.5.5 CR-V-POS COMMAND

9.5.6 CR-DDOTS COMMAND

9.5.7 CR-DLINECOMMAND

9.5.8 CR-PC STORECOMMAND

9.5.9 CR-SET PC ADJ COMMAND

9.6 Video Command

9.6.1 CR_SERSYSCOMMAND

9.7 Input Command

9.7.1 CR-INPUTCOMMAND

9.7.2 CR-COURCECOMMAND

9.7.3 CR-INPUT_%1COMMAND

9.7.4 CR-SYSTEMCOMMAND

9.8 Screen Command

9.8.1 CR-SCREENCOMMAND

9.8.2 CR-FLSCRENCOMMAND

9.8.3 CR-TRUECOMMAND

9.8.4 CR-KYSTONMODECOMMAND

9.9 Lamp COMMAND

9.9.1 CR_LAMPREPLCOMMAND

9.9.2 CR-LAMPMODECOMMAND

9.9.3 CR-PROJECOMMAND

9.10 Sound Status COMMAND

9.10.1 CR-VOLUMECOMMAND

9.10.2 CR-MUTECOMMAND

9.11 Setting Status COMMAND

9.11.1 CR-BBACKCOMMAND

9.11.2 CR-DISPCOMMAND

9.11.3 CR-RCODECOMMAND

9.11.4 CR-LANGCOMMAND

9.11.5 CR-ON-STACOMMAND

9.11.6 CR-P-MANE COMMAND

9.11.7 CR-P-MANETIMECOMMAND

9.11.8 CR-FANSPEEDCOMMAND

9.11.9 CR-KEYDISCOMMAND

9.11.10 CR-TERMINALCOMMAND

9.11.11 CR-STANDBYMODECOMMAND

9.11.12 CR-POINTERCOMMAND

Page5

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

9.12 Other Status Read Command

9.12.1 CR-SIGNAL COMMAND

9.12.2 CR-VMUTECOMMAND

9.12.3 CR-FREEZECOMMAND

9.12.4 CR-PTIMERCOMMAND

9.12.5 CR-TEMPWARNCOMMAND

9.12.6 CR-TEMPFAILCOMMAND

Page6

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

1 Outview

1.1 This Functional Specification defines communication functions such as Wireless Imager for

LV-5210/7215/7210.

1.2 The Projector Firmware Ver.1.x-ready.

1.3 Commands are to communicate to such as Wireless Imager, but most commands control a

remote projector with PC installed RS232C. That’s why commands are defined as expand

serial commands

2 Serial Interface Specification

2.1 Communication Specification

Specification

Synchro System Asynchronou

Transmission

eed 9600 / 19200

Data Length 8 bit

Parity N/A

Stop Bit 1

Flow Control N/A

Note1) transfer rate: initial setting value is 19200

Note2) transfer rate can be changed by service MODE

2.2 Connection

Must use a dedicated serial cable that come with the projector for a connection to a

COMPUTER and a projector.

PC Projector

COM No.1 Control Port

RXD

TXD

DTR

DSR

RTS

CTS

RING

(D-Sub9Pin) (MiniDIN8Pin)

Page 7

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

3 Note for communications

3.1 The expand command is defined one Command/one line that starts ”C” and ends carriage

return (0x0D)

3.2 When a projector receives carriage return (0x0D), it starts decoding.

-Functional Execution

(Ex.) ”CF_BRIGHT_032” [CR]

-Status Read Command

(Ex.) “CR_RIGHT” [CR] Note) _means a space

3.3 When it takes more than one second to receive one Command, it does not execute the Command.

Since the projector has received the first data “C”, when it takes more than 1 second until the

projector receives a carriage return (0x0D), it clears information of buffer.

3.4 When a COMPUTER keeps sending some Command, it must wait sending next command after

100ms when the COMPUTER receives the return command.

More than 100ms

Command

PC Projector “CF_BRIGHT_032”CR Next Command

Projector PC “000” CR

Response

(A few ms -- 5s)

3.4.1 When a COMPUTER sends next command before receiving a return command, the

projector may not operate properly.

3.4.2 Except no response after 5 seconds

3.5 It takes about 5 seconds for internal initialization after plugging in AC. During this time it

cannot process command. Do not issue any commands.

4 Name Definition

4.1 Data from a controller to a projector is represented as COMMAND, and data from a projector to

a controller for the incoming command is represented as RESPONSE.

4.2 [CR]: Carriage Return Code

The Command ends carriage return code. Also response Command ends carriage return, too.

4.3 : Space Code

All space Code is indicated by (_).

4.4 %1: Parameter in Command

When there are some parameters, the parameters are defined as %2, %3…

4.5 %%%: Error Code from a projector

“000”: Normal Reception

See “ 7.Error Code Table “ for error number.

4.6 %a : Parameter for response from a projector

When there are a few parameters, the parameter defines as %b, %c…

Page8

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

5 Functional Execution Command Table

5.1 Image Command Table

Execute Command Item

CF_BRIGHT_%1 [CR] Set Brightness value

CF_CONT_%1 [CR] Set Contrast value

CF_COLOR_%1 [CR] Set Color value

CF_TINT_%1 [CR] Set Tint value

CF_SHARP_%1 [CR] Set Sharpness value

CF_GAMMA_%1 [CR] Set-GAMMA value

CF_WBAL-R_%1 [CR] Set White Balance Red value

CF_WBAL-G_%1 [CR] Set White Balance Green value

CF_WBAL-B_%1 [CR] Set White Balance Blue value

CF_COLTEMP_%1 [CR] Set Color Temp. value

CF_PROGV_%1 [CR] Set or Cancel for Progressive

CF_IMAGE_%1 [CR] Set Image MODE.

CF_IMAGEADJ_%1 [CR] Reset and store for Image Adjustment.

5.2 PC Control Command Table

Execute Command Item

CF_FSYNC_%1 [CR] Set Fine Sync value.

CF_TDOTS_%1 [CR] SetTotalDotsvalue.

CF_CLAMP_%1 [CR] Set Clamp value.

CF_H-POS_%1 [CR] SetHorizontalPositionvalue.

CF_V-POS_%1 [CR] SetVerticalPositionvalue.

CF_DDOTS_%1 [CR] SetDisplayDotsvalue.

CF_DLINE_%1 [CR] SetDisplayLinevalue.

CF_PCSTORE_%1 [CR] Store e current PC Adj. Status to MODE 1, 2, 3, 4, or 5.

CF_PCMODEFREE_%1 [CR] Reset MODE1, 2, 3, 4, and 5.

5.3 VIDEO Control Command Table

Execute Command Item

CF_AVDDOTS_%1 [CR] Set AV Horizontal Resolution Value

CF_AVDLINE_%1 [CR] Set AV Vertical Resolution Value

CF_AVHPOS_%1 [CR] Set AV Horizontal Position Value.

CF_AVVPOS_%1 [CR] Set AV Vertical Position Value.

CF_AVSERV_%1 [CR]

Reset AV Horizontal /Vertical Resolution that are set in

such as CF_AVDDOTS/CF_AVDLINE to default

setting.

5.4 Input Control Command Table

Execute Command Item

CF_INPUT_%1 [CR] Select Input.

CF_SOURCE_%1 [CR] Select Input Sauce.

CF_INPUT_%1_%2 [CR] Select Input and Source.

CF_SYSTEM_%1 [CR] Select System.

Page9

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

5.5 Screen Command Table

Execute Command Item

CF_SCREEN_%1 [CR] Select Screen size.

CF_FLSCREN_%1 [CR] Set and Cancel Full Screen.

CF_TRUE_%1 [CR] Set and Cancel True for Screen.

CF_DZCENT_%1 [CR] Cancel DIGITAL zooms.

CF_KEYSTONE_%1 [CR] Set Keystone

CF_KYSTNMODE_%1 [CR] Set Keystone store MODE

5.6 Lamp Command Table

Execute Command Item

CF_LAMPH_%1 [CR] Reset lamp total running time.

CF_LAMPMODE_%1 [CR] Select lamp MODE.

5.7 Sound Command Table

Execute Command Item

CF_VOLUME_%1 [CR] Set Volume value

CF_MUTE_%1 [CR] Control Sound Mute ON/OFF

5.8 Setting Command Table

Execute Command Item

CF_BBACK_%1 [CR] Set Blue Back function.

CF_DISP_%1 [CR] Set Display function.

CF_LOGO_%1 [CR] Set Logo function.

CF_CEIL_%1 [CR] Set Ceiling function.

CF_REAR_%1 [CR] Set Rear Function.

CF_RCODE_%1 [CR] Select Remote Control Reception Code.

CF_LANG_%1 [CR] Select OSD language.

CF_ON-STA_%1 [CR] Set Power ON Start Function.

CF_P-MANE_%1 [CR] Set Power management function.

CF_P-MANETIME_%1 [CR] Set Power management time

CF_FANSPEED_%1 [CR] Select Fan Speed.

CF_KEYDIS_%1 [CR] RC//ＫＥＹ inhibit

CF_TERMINAL_%1 [CR] Set TERMINAL.

CF_STANDBYMODE_%1 [CR] Set STANDBYMODE

CF_POINTER_%1_%2 [CR] Set POINTER

CF_FDEFAULT_%1 [CR] Set Factory Default

CF_LOGOCAPTURE_%1 [CR] Capture the current image on the screen.

Page 10

Andere Handbücher für 7215 - LV XGA LCD Projector

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Projektor Handbücher

Canon

Canon LV-7285 Bedienungsanleitung

Canon

Canon LV-5200 Bedienungsanleitung

Canon

Canon 7215 - LV XGA LCD Projector Bedienungsanleitung

Canon

Canon SX50 - REALiS SXGA+ LCOS Projector Bedienungsanleitung

Canon

Canon LV-7545 Bedienungsanleitung

Canon

Canon LV-7555 Bedienungsanleitung

Canon

Canon LX-MU700 Bedienungsanleitung

Canon

Canon REALiS X600 Bedienungsanleitung

Canon

Canon WUX6000 Bedienungsanleitung

Canon

Canon LV-S3E/D78-5423 Bedienungsanleitung

Canon

Canon 1318C002 Bedienungsanleitung

Canon

Canon LV 7490 Bedienungsanleitung

Canon

Canon LV-5220 - Multimedia Projector SVGA Bedienungsanleitung

Canon

Canon LV S3 - SVGA LCD Projector Bedienungsanleitung

Canon

Canon WX520 Bedienungsanleitung

Canon

Canon LV-7105 Bedienungsanleitung

Canon

Canon REALIS LV-7590 Bedienungsanleitung

Canon

Canon XEED SX6 Bedienungsanleitung

Canon

Canon REALiS WUX5000 Bedienungsanleitung

Canon

Canon LV-7355J Bedienungsanleitung

Canon

Canon 2105B002AA Bedienungsanleitung

Canon

Canon LV 7490 Bedienungsanleitung

Canon

Canon REALIS WUX10 MARK II D Bedienungsanleitung

Canon

Canon LV-7297A Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung

Epson

Epson PowerLite 810p Bedienungsanleitung