Canvas 088-1718-0 Bedienungsanleitung

PORTLAND COLLECTION ARMCHAIR

PRODUCT N0. 088-1718- 0

ASSEMBLY INSTRUCTIONS

Toll-free: 1-888-670-6684

IMPORTANT: Please read this manual carefully before beginning assembly of this product.

Keep this manual for future reference.

TABLE OF CONTENTSIMPORTANT SAFETY INSTRUCTIONS

MADE IN CHINA

IMPORTED BY TRILEAF DISTRIBUTION TRIFEUIL TORONTO, CANADA M4S 2B8

Table of Contents 3

Important Safety Instructions 3

Part List 4

Assembly 5-10

Cleaning and Maintenance 11

Technical Specications 11

Warranty 12

IMPORTANT: Retain the manual for future reference, and read the instructions

carefully.

• Always place the product on at, horizontal ground.

• Any assembly or maintenance of the product must be carried out by adults only.

• Make sure there is sucient manpower when assembling or moving the product.

• Some parts may contain sharp edges. Wear protective gloves if necessary.

• Check all screws and nuts periodically for tightness. When required, tighten them.

• Repairing and replacing parts should be done by a qualied technician.

• Do not use the product in heavy wind conditions, it could tip over and cause injuries to

the user or passersby.

• Do not use the product if it is in inverted position or if its legs do not rest on the ground.

Failure to follow could result in serious injury.

• Never stand on the product. Failure to follow could result in serious injury.

• The product can accommodate only one person at a time. Failure to follow could result

in serious injury.

• Do not exceed the maximum load (120 Kg) of the product.

• If the product is not be used for a long period (e.g. winter time), store it in a clean, dry

environment.

• Do not light re near the product.

• Retain the original packaging to store the product.

WARNING!

To reduce the risk of serious injury, read the following safety instructions

before assembling and using the product.

CAUTION!

Always keep children under close supervision while they are playing near

this product. Never leave children unattended. Keep pets away while

setting up the product.

4 5

PRODUCT NO. 088-1718-0

ASS E M B LY

PART LIST

Left Arm Frame

Right Arm Frame

- 1

Back Panel

- 1

Seat Panel

- 1

Back Cushion

- 1

Seat Cushion

- 1

Screw M6 x 26

- 10

Screw M8 x 53

- 2

Needed for assembly:

Hex key (included) Wrench (included) 2 people

Washer - 20

Screw cap - 10

Screw nut - 10

Screw nut cover - 10

Hex Key - 1

Wrench - 1

Let us help you!

DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US

FIRST! 1-888-670-6684

If you have questions regarding your product, require warranty

assistance, or have damaged or missing parts, please call our

customer service toll-free helpline. Contact us for assistance, we’re

here to help.

IMPORTANT: Please read and understand this manual before any assembly.

Before beginning assembly of the product, make sure there are no missing parts.

Compare the parts with packaging contents list. If any part is missing, or if you

have any questions, contact the service center at 1-888-670-6684 (toll free).

Take all parts from the packaging box and position them on a clean oor. Remove

all packing materials and place them back into the box. Do not dispose of the

packing materials until the assembly is complete. Read each step carefully before

beginning any assembly and make sure you understand each step. If any part is

missing, please call our toll-free number for assistance: 1-888-670-6684.

CAUTION!

• Check all screws and nuts periodically for tightness. If required tighten them.

• Keep children away during assembly.

This product contains small parts which can be swallowed by children.

• Keep ngers away from places where they can be pinched or trapped.

• Do not attempt to assemble the product if any part is missing.

76 7

PRODUCT NO. 088-1718-0

ASS E M B LY

Step 1

Requires B, G

Insert the shank of the screw (B) into the corresponding hole located on the left

side of the back panel (3). Tighten the screws using the hex key (G). Repeat the

same procedure on the right side of the back panel.

Step 3

Requires 1, 2, 3

Align holes located on the lower portion of the back panel (3) with the

corresponding holes of the right arm frame (2). Repeat the same procedure for

the left arm frame (1).

Step 2

Requires 1, 2

Lock the head of the screws (B) into the respective slots located on the left arm

frame (1) and the right arm frame (2).

Step 4

Requires A, C, E, G, H

Insert the screw (A) with one washer (C) into the aligned hole. Tighten the screw

using another washer and a screw nut (E). Use the hex key (G) to rmly tighten

the screw. Use the wrench (H) to secure the nut from moving. Follow the same

procedure for the second screw. Repeat the same procedure for the left arm

frame.

CA EGH

NOTE:

Do not tighten the screws completely until all four screws are installed.

8 9

PRODUCT NO. 088-1718-0

ASS E M B LY

Step 5

Requires 1, 2, 4

Tilt the assembled panel. Align holes located on the right arm frame (2) with the

corresponding holes on the front of the seat panel (4). Repeat the same procedure

for the left arm frame (1).

Step 7

Requires 3, 4

Align holes located at the rear portion of the seat panel (4) with the corresponding

holes of the back panel (3).

CA EGHCA EGH

NOTE:

Do not tighten the screws completely until all four screws are installed.

NOTE:

Do not tighten the screws completely until all four screws are installed.

Step 6

Requires A, C, E, G, H

Insert the screw (A) with one washer (C) into the aligned hole. Tighten the screw

using another washer and a screw nut (E). Use the hex key (G) to rmly tighten

the screw. Use the wrench (H) to secure the nut from moving. Follow the same

procedure for the second screw. Repeat the same procedure for the left arm

frame.

Step 8

Requires A, C, E, G, H

Insert the screw (A) with one washer (C) into the aligned hole. Tighten the screw

using another washer and a screw nut (E). Use the hex key (G) to rmly tighten

the screw. Use the wrench (H) to secure the nut from moving. Follow the same

procedure for the second screw. Repeat the same procedure for the left arm

frame.

10 11

PRODUCT NO. 088-1718-0

WARRANTY

MAINTENANCETECHNICAL DATA

10 11

PRODUCT NO. 088-1718-0

ASS E M B LY

Step 9

Requires D, F

After assembling all the chair parts, make sure all screws are fully tightened. Cover

all screws and screw nuts using the screw caps (D) and screw nut covers (F).

Step 10

Requires 5, 6

Turn the chair upright. Place the back cushion (5) and seat cushion (6) on the back

panel and seat panel, respectively. The chair is ready for use.

6b 6b

5a 6

Seat CushionBack Cushion

Dimensions (L x W x H) 83 x 77.5 x 85 cm

32 5/8 x 30 1/2 x 33 1/2"

Product weight 120 kg

265 lb

NOTE:

•When placing the back cushion, make sure that the zipper (5a) on the back

cushion is facing downward.

• When placing the seat cushion, make sure that the circular corners (6a) of the

seat cushion are facing outward and the square corners (6b) of the seat cushion

are facing inward.

CAUTION!

•Check all screws periodically for tightness. If required, tighten them.

•If required to disassemble the product, follow the assembly steps in the

reverse order.

•Fabric colour may fade after prolonged exposure to light. Keep the cushions

indoors when not in use.

• If surface oxidation (rusting) occurs and no measures are taken to correct

it, the oxidation may start dripping onto the assembly surface, which may

cause damaging stains that may be dicult to remove.

•To wash the cushions:

- Use a soft bristle brush to clean;

- Always use a mild solution of soap and water. Never use detergent;

- Rinse with clean water. The water should be cold to lukewarm, never more

than 25°C (77°F);

- Remove excess moisture from the cushions using a dry towel. Do not place in

washing machine nor hand squeeze.

•Do not use bleach, acid, or other abrasive cleaners on the product.

• Steel components of garden accessories and furniture are treated with rust

inhibiting paint. However, due to the nature of steel, surface oxidation (rusting)

will occur if this protective coating is scratched. This is a natural process. To

minimize this condition, it is recommended that care be taken when assembling

and handling the product, in order to prevent the paint from being scratched.

Surface rust can be removed easily by applying a little cooking oil.

12 PB

PRODUCT NO. 088-1718-0

WARRANTY

This CANVAS™product carries a one (1) year warranty against defects in

workmanship and materials. Trileaf Distribution agrees to replace the defective

product free of charge within the stated warranty period, when returned by

the original purchaser with proof of purchase. This product is not guaranteed

against wear or breakage due to misuse and/or abuse.

Andere Canvas Inneneinrichtung Handbücher

Canvas

Canvas CHELSEA SECTIONAL 088-1867-4 Bedienungsanleitung

Canvas

Canvas EVELYN BUFFET 068-7593-6 Bedienungsanleitung

Canvas

Canvas YORKVILLE 088-2231-0 Bedienungsanleitung

Canvas

Canvas MORAINE 088-0543-0 Bedienungsanleitung

Canvas

Canvas CONTEMPO 088-1861-6 Bedienungsanleitung

Canvas

Canvas 068-7826-4 Bedienungsanleitung

Canvas

Canvas Concordia 168-0036-8 Bedienungsanleitung

Canvas

Canvas SILVER SANDS 088-2295-8 Bedienungsanleitung

Canvas

Canvas TRIBECA 088-1681-4 Bedienungsanleitung

Canvas

Canvas 088-2247-4 Bedienungsanleitung

Canvas

Canvas SHERBROOKE 088-2086-6 Bedienungsanleitung

Canvas

Canvas CTI1513565 Bedienungsanleitung

Canvas

Canvas FAIRVIEW 088-2223-0 Bedienungsanleitung

Canvas

Canvas ANNEX KVS890H Bedienungsanleitung

Canvas

Canvas MODENA Bedienungsanleitung

Canvas

Canvas JENSEN 088-1928-0 Bedienungsanleitung

Canvas

Canvas Bala Corner Chair KVS948D Bedienungsanleitung

Canvas

Canvas JASPER 188-0273-4 Bedienungsanleitung

Canvas

Canvas PARKSVILLE 168-0096-4 Bedienungsanleitung

Canvas

Canvas MERCIER 088-2222-2 Bedienungsanleitung

Canvas

Canvas 068-7642-0 Bedienungsanleitung

Canvas

Canvas Holliston CTCSC-3 Bedienungsanleitung

Canvas

Canvas HALLWAY TREE 068-7867-6 Bedienungsanleitung

Canvas

Canvas BURNABY 168-0113-4 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung