Canvas Office Landscape Private Office Hutch Montageanleitung

® Y, Zand Canvas Office Landscape are among the registered trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication.

The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.

Part no. 1b54fp rev G.

Parts Included:

Tools Needed:

Canvas Office Landscape®Private Office Hutch Installation

and Disassembly for Recycling Instructions

Minix Housing (4) Connecting Bolt (4) Trim Cap

Hutch Cabinet

Thin Door (1 or 2) Bin Door (1 or 2)

Hardware Pack

D E F

B C

Power Driver Phillips Bit 13/64 Drill Bit

(.196 Dia)

Phillips

Screwdriver

Tape Rule

Safety Glass

® Y, Zand Canvas Office Landscape are among the registered trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication.

The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.

Part no. 1b54fp rev G.

1. Drill 2 holes at each end of Work Surface

Using the dimensions given.

2. Install Connecting Bolt (E) into each hole.

11.50

1.50

.196 Dia

(13/64 Dia Drill)

Work Surface

.38 1

® Y, Zand Canvas Office Landscape are among the registered trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication.

The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.

Part no. 1b54fp rev G.

1. Insert 2 Minix Housings (D) into each End Panel on Hutch Cabinet (A).

2. Set Hutch Cabinet End Panels onto Connection Bolts in Work Surface.

3. Turn Housings a 1/4 turn to lock onto Connection Bolts.

4. Install Trim Caps (F) where visible.

Spreading Bolt

Housing

Spreading Bolt

® Y, Zand Canvas Office Landscape are among the registered trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication.

The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.

Part no. 1b54fp rev G.

1. Insert of Thin Door (B) into back groove of Upper Channel. Lower bottom of door into

back groove of Lower Channel.

2. Insert top clips on back of Bin Door (C) into Front Groove of Upper Channel. Snap

bottom clips on back of Bin Door into Front Groove of Lower Channel.

3. Install Tackboard onto Hutch. See instructions for Tackboard (1B57CW) for details.

Upper Channel

Lower Channel

Tackboard

Front Groove

Back Groove

® Y, Zand Canvas Office Landscape are among the registered trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication.

The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.

Part no. 1b54fp rev G.

Disassembly and Recycling:

Materials Identication and Segregation:

Where possible, plastic components are marked with ASTM recycling codes. Use

these codes to identify material type for recycling. Non marked components should

be treated as mixed plastic. Ferrous metals can be identied using a small magnet

for recycling. Non-ferrous metals should be separated and recycled separately.

To disassemble product, reverse the above installation steps:

1. Remove screws from track.

2. Remove track from storage assembly.

Storage Cabinet

Screws

Track

® Y, Zand Canvas Office Landscape are among the registered trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication.

The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.

Part no. 1b54fp rev G.

1. Remove screws from door guide.

2. Remove door guides from door.

1. Metal Lock Plug Removal: Insert Universal key into Lock Plug, rotate to unlocked

position. Insert Plug Removal Key into lock. Gently wiggle with light outward pressure.

2. Black Plastic Plug Removal: With Hex Wrench, rotate plug to unlocked position.

Gently pull outward. Be careful not to catch plug on wood surface around lock hole.

3. On units with no lock plug installed, use a athead screwdriver to rotate the adaptor to

the unlock position.

Metal Lock

Plug

Plug Removal

Key

Hex Wrench

Plastic

Plug

Keyed Alike Lock Plug Installation

Door Guide

Bin Door

Screws

® Y, Zand Canvas Office Landscape are among the registered trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication.

The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.

Part no. 1b54fp rev G.

1. Pull hard to remove the panels.

Panel

Inhaltsverzeichnis

Andere Canvas Inneneinrichtung Handbücher

Canvas

Canvas ROBSON 168-0048-0 Bedienungsanleitung

Canvas

Canvas ARROWHEAD RECYCLED MUSKOKA CHAIR 088-2172 Bedienungsanleitung

Canvas

Canvas MONACO 088-1787-4 Bedienungsanleitung

Canvas

Canvas RENFREW 088-2041-2 Bedienungsanleitung

Canvas

Canvas 168-0097-2 Bedienungsanleitung

Canvas

Canvas Manhattan 068-7669-8 Bedienungsanleitung

Canvas

Canvas ELLIS 168-0011-6 Bedienungsanleitung

Canvas

Canvas SERENE SHELF 068-7671-0 Bedienungsanleitung

Canvas

Canvas 088-2276-4 Bedienungsanleitung

Canvas

Canvas NELSON 168-0098-0 Bedienungsanleitung

Canvas

Canvas WELLINGTON 063-6340-4 Bedienungsanleitung

Canvas

Canvas 088-2060-6 Bedienungsanleitung

Canvas

Canvas 068-7642-0 Bedienungsanleitung

Canvas

Canvas HAVANA GAZEBO Bedienungsanleitung

Canvas

Canvas 088-1790-4 Bedienungsanleitung

Canvas

Canvas SEABROOKE 088-0746-8 Bedienungsanleitung

Canvas

Canvas 088-1711-4 Bedienungsanleitung

Canvas

Canvas MERCIER 088-1393-0 Bedienungsanleitung

Canvas

Canvas ANNEX KVS890H Bedienungsanleitung

Canvas

Canvas Bala Corner Chair KVS948D Bedienungsanleitung

Canvas

Canvas JORDAN 168-0105-4 Bedienungsanleitung

Canvas

Canvas JASPER 188-0273-4 Bedienungsanleitung

Canvas

Canvas Concordia 168-0037-6 Bedienungsanleitung

Canvas

Canvas GALIANO 188-0399-6 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung