Carrier Comfort TC-WHS01-BLK Bedienungsanleitung

TC-WHS01- BLK

Comfort™ Series Wi-FirThermostat

Installation Instructions

NOTE: Read the entire instruction manual before starting the installation.

TABLE OF CONTENTS

PAGE

INTRODUCTION 1..............................................

GETTING STARTED 2...........................................

Safety Considerations 2...........................................

Before You Begin 3..............................................

HVAC System Compatibility Information 4...........................

Specifications 5.................................................

Wiring Requirements 6...........................................

INSTALLATION 7...............................................

Step 1. Power Off HVAC Equipment 7...............................

Step 2. Remove Existing Thermostat 7...............................

Step 3. Install the Thermostat 8.....................................

Step 4. Connect the Wiring 9.......................................

Step 5. Power On the HVAC Equipment 19...........................

NAVIGATING THE MENUS 20....................................

CONFIGURING THE THERMOSTAT 22............................

Equipment 22..................................................

Thresholds 24..................................................

Test Equipment 27..............................................

Reset HVAC Equipment Settings 28.................................

Performing a Hardware Reset 28...................................

Rebooting the thermostat 28.......................................

Configuring Reminders and Alerts 29................................

Alerts 30......................................................

List of Alerts 31................................................

Approvals 32...................................................

FCC Compliance Statement 32.....................................

INTRODUCTION

Welcome and from all of us at Carrier, thank you for purchasing your

new Carrier Wi- Fithermostat. This thermostat is designed to be simple

to install but it’s best to review all of the instructions in this manual

before you start to help ensure there are no surprises during installation.

If any questions arise during your installation, we’re here to help:

SVisit www.carrier.com/homecomfort for how- to videos and answers

to frequently asked questions.

STechnical support is also available by phone or email at:

d1.800.CARRIER or 1.800.227.7437

dcontact.carrier@carrier.utc.com

- The thermostat is also supported by the world’s greatest network of

professional contractors. Find an Expert Carrier Contractor at

www.carrier.com/dealers.

Let’s get started!

GETTING STARTED

Safety Considerations

Improper installation, adjustment, alteration, service, maintenance, or use

can cause explosion, fire, electrical shock, or other conditions which may

cause death, personal injury or property damage.

Follow all safety codes. Wear safety glasses, protective clothing, and

work gloves. Have a fire extinguisher available. Read these instructions

thoroughly and follow all warnings and cautions included in literature

and attached to the unit. Consult local building codes and the current

edition of the National Electrical Code (NEC) NFPA 70. In Canada, refer

to the current editions of the Canadian Electrical Code CSA C22.1.

Recognize safety information. When you see this symbol on the unit

and in instructions or manuals, be alert to the potential for personal

injury. Understand the signal words DANGER,WARNING,and

CAUTION. These words are used with the safety- alert symbol.

DANGER identifies the most serious hazards, which will result in severe

personal injury or death. WARNING signifies hazards, which could

result in personal injury or death. CAUTION is used to identify unsafe

practices, which may result in minor personal injury or product and

property damage. NOTE is used to highlight suggestions which will

result in enhanced installation, reliability, or operation.

Before You Begin

This manual explains the procedures for installing the Carrier

ComforttSeries Wi- FiThermostat. Please read it carefully before

beginning the installation.

For information on how to operate the Comfort Series Wi- Fi Thermostat,

please see the Comfort Series Wi- Fi Thermostat Owner’s Manual.

The Comfort Series Wi- Fi Thermostat is designed to be mounted on the

your wall in a convenient location.

A13335

PERSONAL INJURY HAZARD

Disconnect electric power to the HVAC system before

installing this product. Failure to do so could result in electric

shock and/or equipment damage.

All wiring must conform to your local electrical code.

Mercury Notice: This product does not contain mercury. If

you are replacing a product that does contain mercury, contact

your local waste- management authority for disposal

instructions. Do not discard the old product in the regular

trash.

CAUTION

HVAC System Compatibility Information

The Comfort Series Wi- Fi Thermostat is designed to operate with

low- voltage heating and cooling systems. It is not designed for use with

line- voltage or millivolt heating and cooling systems.

The Comfort Series Wi- Fi Thermostat supports:

dUp to 2 heat and 2 cool stages on a conventional system.

dUp to 3 heat and 2 cool stages on a heat pump system.

The Comfort Series Wi- Fi Thermostat supports the following

equipment:

Equipment Supported?

Gas / Oil / Electric heating

(uptotwostages)

YES

Heat pump with auxiliary heat

(up to three stages)

YES

Geothermal Heat Pump YES

Dual fuel systems YES

Standard electric cooling

(uptotwostages)

YES

Boilers YES

Specifications

Temperature Ranges

Heat: 50to88°F (10 to 31°C) by default,

adjustable from 50 to 90°F (10 to 32°C)

Cool: 52to90°F(11to32°C) by default,

adjustable from 50 to 90°F (10 to 32°C)

Display: 40 to 100°F(5to37°C)

Sensitivity: +/- 1°F(0.5°C)

Operating 32 to 130°F(0to55°C)

Humidity Range

Display: 20 to 90% R.H.

Sensitivity: +/- 5% R.H.

Operating: 5 to 95% R.H. (non- condensing)

Dimensions

Thermostat: 5.5” W x 3.25” H x 1” D

(139.5mm W x 82.5mm H x 25mm D)

Power Consumption

24VAC (3VA maximum)

Wiring Requirements

The following table shows the maximum wire lengths allowed:

Thermostat to HVAC Equipment

18 AWG 20 AWG 22 AWG

128 ft (380m) 80 ft (240m) 50 ft (150m)

Terminal Description and Electrical Ratings

Terminal Description Voltage Current (Max)

N/C Unused N/A N/A

Y 1st Stage Compressor 24V AC 2A

W(O/B) 1st Stage Heating or

Reversing Valve

Changeover

24V AC 2A

GFan 24V AC 2A

CCommon 24V AC 2A

Y2 2nd Stage Compressor 24V AC 2A

W2 (AUX) 2nd Stage Heating or

1st Stage Aux Heat

24V AC 2A

NOTE: Factory jumper installed between RC and RH. Remove jumper for

2- transformer applications. See wiring diagrams for additional information.

INSTALLATION

There are 5 steps to install the thermostat:

Step 1 — Power Off HVAC Equipment

Step 2 — Remove Existing Thermostat

Step 3 — Install the Wi- Fi Thermostat

Step 4 — Connect the Wiring

Step 5 — Power On HVAC Equipment

Step 1. Power Off HVAC Equipment

1. Before disconnecting the existing thermostat, or installing the

Comfort Series Wi- Fi Thermostat, disconnect the power to the

heating and air conditioning equipment.

a. You can do this either at your circuit breaker box or a switch

at your indoor furnace or fan coil.

b. Most systems have one switch, but some systems will have

two switches.

2. Make sure your system is without power by using your old ther-

mostat to adjust the temperature. Your system should not turn on.

Step 2. Remove Existing Thermostat

Using your old thermostat as a guide, record wire color and

corresponding letter where it is connected on the thermostat terminal

block. Don’t worry about any non- connected wires.

Also note if there is a jumper wire or bracket between Rh, Rc, or R. If

yes, you will need to jumper these terminals on your new thermostat as

well.

Disconnect the wires to the existing thermostat and remove it from the

wall.

Tip: Take a photo of your old thermostat wiring with your smartphone

for reference later

Step 3. Install the Comfort Series Wi- Fi Thermostat

The ideal location for the thermostat is approximately 5 ft (1.5 m) above

floor level in the main living area.

Do not install the thermostat:

dClose to sources of heat such as incandescent lights

dNear supply heating/cooling sources

dIn direct sunlight

dOn exterior, non- insulated or poorly insulated walls

dIn the kitchen or other areas of potentially high heat and/or hu-

midity

dIn an area that could restrict air flow

To install the thermostat:

1. Gently separate the backplate from the thermostat.

2. Place the thermostat backplate on the wall. Make sure that any ex-

isting wires can be inserted through the opening on the backplate.

3. Using the backplate as a template, mark the location of the mount-

ing holes on the wall as shown below.

YN/C

O/B

GRCRHCY2

AUX

A13338

Fig. 1 - The solid color indicates mounting holes

Inhaltsverzeichnis

Andere Carrier Thermostat Handbücher

Carrier

Carrier 33CS400-01 Bedienungsanleitung

Carrier

Carrier Cor TP-WEM01-A Bedienungsanleitung

Carrier

Carrier Infinity Control Home Montageanleitung

Carrier

Carrier ETN Bedienungsanleitung

Carrier

Carrier EDGE Pro Bedienungsanleitung

Carrier

Carrier TSTATCCPS701 Bedienungsanleitung

Carrier

Carrier Programmable Thermostats Anleitungen und Rezepte

Carrier

Carrier NON-PROGRAMMABLE DIGITALTHERMOSTAT Bedienungsanleitung

Carrier

Carrier Cool Share Web-Programmable Thermostat Bedienungsanleitung

Carrier

Carrier Infinity SYSTXCCITW01 Bedienungsanleitung

Carrier

Carrier Thermostat Anleitungen und Rezepte

Carrier

Carrier 53DFS250-HW Bedienungsanleitung

Carrier

Carrier Debonair 33CS220-FS Bedienungsanleitung

Carrier

Carrier TC-PHP Bedienungsanleitung

Carrier

Carrier 33CS450-01 Bedienungsanleitung

Carrier

Carrier P474-1100RF Bedienungsanleitung

Carrier

Carrier Connect 33CONNECTSTAT43 Bedienungsanleitung

Carrier

Carrier debonair 33cssn2-wc Bedienungsanleitung

Carrier

Carrier 33CS2PPRH-02 Bedienungsanleitung

Carrier

Carrier Programmable Dual Fuel Thermostats Anleitungen und Rezepte

Carrier

Carrier Touch-n-Go TC-PHP01-A Bedienungsanleitung

Carrier

Carrier 33CS420-01 Bedienungsanleitung

Carrier

Carrier 53DFS250-HW Bedienungsanleitung

Carrier

Carrier Infinity SYSTXCCITW01 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung