CAS DL Series Bedienungsanleitung
2
3
CONTENTS
PRECAUTIONS................................................4
PREFACE..............................................................6
NAMESAND FUNCTIONS.....................6
INSTALLATIONS...........................................8
OPERATIONS.......................................................9
1. General Weighing.............................................9
2. Weighing withTare........................................10
3. Changing Unit of Weight..............................10
4. HOLD Function..............................................11
5. Comparator Function ...................................11
6.AUTO Power Off Function..........................13
BATTERYMAINTENANCE.................14
ERROR MESSAGE..........................................14
SPECIFICATIONS........................................15
4
5
6
PREFACE
Thank you for purchasing our CAS DL series.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your specialty departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have reliability.
This manual will help you with proper operation and care of the DL series.
Please keep this handy for future reference.
NAMES AND FUNCTIONS
OVERALL VIEW
7
DISPLAYAND KEYBOARD
■KEY FUNCTIONS
KEYS FUNCTIONS
Used to set the zero point.
Used to input or cancel the weight of tare.
Usedto operate thefollowingsequence on the display.
[WEIGHT][HOLD][WLonor off] [WEIGHT]
Usedto turn onandoffthescale.
8
INSTALLATIONS
1. Insert and fasten the bracket support assembly screws.
2. Connect the load cell wire and power line to head.
3. Insert the support cover into the support.
4. Insert and fasten the screws.
9
OPERATIONS
■Turn on the display by pressing the ON/OFF key. Then the display will show
all the segments and count up "0" to "9". You may stop this automatic counting
by pressing the ZERO key.
■When you turn on the display, make sure that platter is empty.
Otherwise, display will show "Err", an error of initial zero range. Please refer
"ERROR MESSAGE" section for more information on page 16.
■When the weight becomes stable the display shows the stable sign(0) on.
■You may need to make it "0.0" by pressing the ZERO key unless the display
indicate "0.0" under the empty platter.
1. General Weighing
①Placea commodity on
theplatter. ②Remove the commodity
fromthe platter.
10
2. Weighing with Tare
■TARE means the weight of container being used for a commodity.
■TARE key function is to subtract the weight of the container from full weight
loaded.
①Placea container onthe
platter. ②PresstheTARE key. ③Place acommodityintothe
container,then the display
willshowonlythe weightof
thecommodity.
④Removecontainer and
commodity,thenthe display
willshowthe weight ofthe
containerwith "-" symbol.
⑤PresstheTARE key,then
displaywillshowthe "0.0".
3. Changing Unit of Weight (lb, kg)
■Press the MODE key first. Holding it, press the TARE key in the simple
weighing mode. The display shows the "UnIt" shortly and then you may select
lb, kg as the unit of weight.
11
4. HOLD Function
■When the weight is not stable, press the MODE key.
The display shows the “HOLd” and then press ZERO key.
The display will show average weight.
②Thedisplayshowsthe "HOLd".
③PressZEROkey.Then"HOLd"
displayblinkfortwo times.
④PressZERO key. Thenthe
displaywillshowthe average
weight.The average weight
blinkfor two times.
①Whenthe weight is
unstable,pres the MODEkey.
*NOTE : Stable indication(0) will not display in HOLD mode.
⑤Removethe commodityfrom
theplatter.
5. Comparator Function - HI / LOW Limit Setting
①PressTARE key toactivate
thisfunction. The display
shows"WLON".
②PresstheMODE keyuntil
thedisplayshows"WL
OFF"."WL OFF"means
thatcomparator function
isnot activated.
③PressZEROkeyonce to set
upthe low limit. Thedisplay
shows"0.0"and thefirst
numberflashes.
Andere Handbücher für DL Series
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere CAS Skala Handbücher
CAS
CAS DB-II Bedienungsanleitung
CAS
CAS LP-II Montage- und Wartungsanleitung
CAS
CAS CL3500 Series Bedienungsanleitung
CAS
CAS S2000 Jr. Series Bedienungsanleitung
CAS
CAS BW-1N Bedienungsanleitung
CAS
CAS ECB Series Bedienungsanleitung
CAS
CAS ER JR series Bedienungsanleitung
CAS
CAS BF-1255 Bedienungsanleitung
CAS
CAS PW Series Bedienungsanleitung
CAS
CAS IE-100 Bedienungsanleitung
CAS
CAS NC-I Bedienungsanleitung
CAS
CAS LP-II Bedienungsanleitung
CAS
CAS TP Series Bedienungsanleitung
CAS
CAS CL series Bedienungsanleitung
CAS
CAS PR-T Series Bedienungsanleitung
CAS
CAS MW-II Series Bedienungsanleitung
CAS
CAS CL5000J Series Bedienungsanleitung
CAS
CAS AD-1 Bedienungsanleitung
CAS
CAS TP-15 Bedienungsanleitung
CAS
CAS CL5000 Series Bedienungsanleitung
