CAS NC-1 Bedienungsanleitung
2
3
CONTENTS
PRECAUTIONS..................................................................... 4
INSTRUCTION...................................................................... 6
FEATURES & MAIN FUNCTIONS................................. 6
TECHNICAL SPECIFICATION....................................... 7
DESCRITION OF OVERALL ........................................... 8
THE OPERATIONS............................................................ 10
TEST MODE ......................................................................... 12
SET MODE ............................................................................ 15
BATTERY OPERATION................................................... 19
REMOTE CONTROL........................................................ 20
ASSEMBLE AND DISASSEMBLY ................................ 21
ERROR MESSAGE & TROUBLE SHOOTING........ 22
4
PRECAUTIONS
5
6
INSTRUCTION
We greatly appreciate your purchase of the NC-I.
These goods perform excellently and exhibit splendid properties through strike tests.
Before using the NC-I, it is recommended that you read this manual carefully so you
may use this device to its full potential.
FEATURES
Appropriate hoist scale for industrial field
Useful Zero, Tare and Hold function
Weight Back-Up
Easy to move
Be able to control with remote controller
MAIN FUNCTIONS
User can change the stable condition and range of digital-filter at user's option
Self Hardware test (internal A/D value, Battery power, key and etc)
7
TECHNICAL SPECIFICATION
Max Capacity 20kg 30kg 50kg 100kg 200kg 500kg
Kilogram Division 10g 10g 20g 50g 100g 200g
Max Cap 200lb(100kg) 400lb(200kg) 1250lb(500kg)
kg/lb
version Division 0.1lb(0.05kg) 0.2lb(0.1kg) 0.5lb(0.2kg)
Max Capacity 250lb(125kg) 500lb(250kg) 1000lb(400kg)
U.S.A
version Division 0.1lb(0.05kg) 0.2lb(0.1kg) 0.5lb(0.2kg)
Max Capacity 250lb 500lb 1000lb
Pound Division 0.1lb 0.2lb 0.5lb
A/D Speed 20 times/second
Tare Subtraction Full Capacity
Display below zero “ ᅳ“ minus sign
Excessive Weight Maximum + 9d (display OUEr )
Weight Display Type LCD (5 digit + Sign, 1 Inch Height)
Character Display ZERO, TARE, BAT, POWER, CHARGE
Keys ON/OFF, ZERO, TARE, kg lb <ᅳ>(HOLD)
Battery 7.2V , 2A (Li - ion)
Use the Backlight Not use the Backlight
0.45 W 0.17 W
Power and Battery
consumption Approximate 22 Hours Approximate 58 Hours
Operation Temperature -10 ~ +40℃℃
Rechargeable Adapter 110/220VAC 12V, 1.5AH
Rechargeable Time 4 ~ 5 Hours
Low BAT & Power Off LOW BAT : Below of 6.7V, POWER OFF : 6.4V
WEIGHT Approx. 5.5kg
8
DESCRIPTION OF OVERALL
1. OVERALL VIEW
2. DISPLAY
9
3.LAMP of DISPLAY PART(Front body)
Power ON Being connected theAdapter
Charge RED In charge GREEN Charge is completed
LED
Remocon Receiving part from remote controller
BAT Display the battery recharging time (rechargeable battery)-
about 6.7V remain
- Below zero
ZERO ON when current weight is 0
TARE ON when tare is activated
LCD
OZ/lb/kg Weight Unit
4. KEY
KEYS FUNCTIONS
Power is ON while pressing for 1 second
Power is OFF while pressing for 2.0 seconds
Above function is possible while the power switch on the rear part is ON
Please turn off the power switch on rear part when not use for a long time.
It makes the current weight within the zero range to zero
(±2% of maximum capacity)
Pressing ZERO key for 2 second, can enter the TEST Mode
It is used to weigh with a container
If press the tare key at unload state, Tare state is released
Pressing the ON/OFF key while tare key is pressed, can enter the SET Mode
It is used to weigh the moving things
If you press this key once more in the hold mode, hold state is released
(atAVERAGE HOLD, at MANUALHOLD, at PEAK HOLD)
It is used to change the unit of weight(kg<->lgToggle _ U.S.A. version)
This key is not operated inthe area whichlb unit is used only
5. REAR PART
Power Switch
POWER Main Power Switch (If use, you have to turn on this switch)
ChargerAdaptor connector
Jack Cover If you want to recharge the battery, Connect to the adaptor.
10
THE OPERATION
1. POWER ON
■Press "ON/OFF" key.
2. ZERO OPERATION
■Press "ZERO" key when the zero point is drifted.
3. TARE OPERATION
■Load tare on the hook.
■Press "TARE" key.
"0" is displayed, and the tare is subtracted.
11
■Remove tare on the hook.
■Press "TARE" key.
The tare weight is cleared appers in the display window.
Andere Handbücher für NC-1
1
Inhaltsverzeichnis
Andere CAS Skala Handbücher
CAS
CAS EC-II Series Bedienungsanleitung
CAS
CAS SW-1S Series Bedienungsanleitung
CAS
CAS DB-II Bedienungsanleitung
CAS
CAS PD-II Bedienungsanleitung
CAS
CAS SW-1S Series Bedienungsanleitung
CAS
CAS FW500-E Bedienungsanleitung
CAS
CAS SC Series Bedienungsanleitung
CAS
CAS LP-1000N Series Bedienungsanleitung
CAS
CAS PD-II Bedienungsanleitung
CAS
CAS LP-1000N Series Handbuch
CAS
CAS DB-1H Bedienungsanleitung
CAS
CAS CUW Series Bedienungsanleitung
CAS
CAS WEIGHING SOLUTION SWII PLUS Series Bedienungsanleitung
CAS
CAS CL series Bedienungsanleitung
CAS
CAS MWP Bedienungsanleitung
CAS
CAS DL-60 Bedienungsanleitung
CAS
CAS DB-1 Bedienungsanleitung
CAS
CAS CI-1580A Bedienungsanleitung
CAS
CAS IE-1700 Bedienungsanleitung
CAS
CAS DL Series Bedienungsanleitung
