CAS PD-2 Bedienungsanleitung
2
3
CONTENTS
PRECAUTIONS....................................................... 4
PREFACE .................................................................... 6
NAMES AND FUNCTIONS .............................. 6
OPERATIONS........................................................... 8
1. General Weighing ................................................... 9
2. ECR Interface.......................................................... 9
ERROR MESSAGE ............................................. 10
SPECIFICATIONS............................................... 11
4
PREFACE
5
6
PREFACE
Thank you for purchasing our CAS PD-II.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your specialty departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the PD-II.
Please keep it handy for future reference.
NAMES AND FUNCTIONS
OVERALL VIEW
7
DISPLAY
8
■KEY FUNCTIONS
KEY FUNCTIONS
Used to set the zero point to 0.00 or 0.000.
Used as ENTER key in Setup Mode.
Used to enter a tare weight and used to cancel a tare weight.
Used as ESC key in Setup Mode.
Used to switch between lb and kg.
OPERATIONS
1. General Weighing
■The display indicates if the scale is at zero or if there is a tare entered into the
scale by way of a ZERO and NET.
■When the display is not zero though there is nothing on the platter, press the
ZERO key.
①Turn on the power. The displayshows 0.00 or 0.000.
Make sure that ST(Stable) and ZERO lamps are On.
②Place an item on the platter. When the ST(Stable) lamp
is 0n, read the weight.
9
2. Weighing with Tare
■There is the weight of container being used for a commodity.
■The TARE key subtracts the weight of the container.
①Place the container on the platter.
②Press the TARE key, NET lamp is On.
③Place an item in the container.
④To release the TARE function, remove an item and
container from the platter and press the TARE key.
3. ECR Interface
■PD-II can interface with most ECRs by selecting TYPE 0 to TYPE 6.
ECR Type Selection
①Make sure that power is OFF. While pressing TARE key,
turn on the power. “EcrSEt” is shown on the disply. And then
current ECR type is shown on the display as “tYPE-2”.
②If you select ECR type 5,press the TARE key until the
display shows “tYPE-5”. (Refer to Table 1.)
③To save current ECR type, press the ZERO key.
10
Table 1.
Description
MENU 4-Bit Parallel RS-232 Serial
ECR-TYPE 0 TEC 4 Digit 4Bit Parallel
(New kg)
ECR-TYPE 1 TEC 4 Digit 4Bit Parallel
(Old kg)
Most POS, ECRs and Some
TEC POS System
ECR-TYPE 2 Sharp ER-Axxx, New Sanyo
ECRs using RS-232 others
ECR-TYPE 3 Most POS System
ECR-TYPE 4 Samsung, CRS, NCR2170 and
other ECRs
ECR-TYPE 5 NCI General.
Most POS Software
kg/lb key
ECR-TYPE 6
Universal 4 Bit Parallel
Samsung ER-670
※Serial Communication
9600 Baud Rate, 7 Date bit, Even Parity. 1 Stop bit
ERROR MESSAGE
ERROR REASONS SOLUTIONS
Err Failure ofA/D Module Call your CAS dealer
Err 1 An error of initial zero range Set the platter empty
Make sure there is a platter on the scale
11
SPECIFICATIONS
MODEL 15 lb(6kg) 30 lb(15kg) 60 lb(30kg) 150 lb(60kg)
5lbx 0.002lb
15lbx 0.005lb 15lb x0.005lb
30lbx 0.01lb 30 lbx0.01lb
60lbx 0.02lb 60 lbx0.02 lb
150lbx 0.05lb
DIVISION DUALINTERVAL 3kgx1g
6kgx2g 6kg x2g
15kgx5g 15kg x5g
30kgx10g 30kg x10g
60kgx20g
INTERNALRESOLUTION 1/90,000
EXTERNALRESOLUTION 1/3,000 DUAL
DISPLAY VFD6DIGITS
DISPLAYLAMP ST(STABLE),ZERO,NET,kg, lb
INTERFACE 380(W) x280(D)[mm]
PRODUCTSIZE 380(W) x280(D) x79(H) [mm]
PLATTER SIZE 6.7kg
PRODUCTWEIGHT -0°C ~ +40°C
TEMPERATURE RANGE RS-232C, 4-BitParallelCommunication.(ECRInterface)
POWERSUPPLY AC120V/60Hz
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere CAS Skala Handbücher
CAS
CAS PW-II Bedienungsanleitung
CAS
CAS DB-II series Bedienungsanleitung
CAS
CAS SW-1S Series Bedienungsanleitung
CAS
CAS SW-1S Series Bedienungsanleitung
CAS
CAS PR2-15 Bedienungsanleitung
CAS
CAS CL7200 series Bedienungsanleitung
CAS
CAS SW-2 Bedienungsanleitung
CAS
CAS CL5500 Series Bedienungsanleitung
CAS
CAS HS-1 Bedienungsanleitung
CAS
CAS PD-I Gebrauchsanweisung
CAS
CAS SC Series Bedienungsanleitung
CAS
CAS CAU Series Bedienungsanleitung
CAS
CAS DB-1H Bedienungsanleitung
CAS
CAS CL5000J Series Bedienungsanleitung
CAS
CAS DL Series Bedienungsanleitung
CAS
CAS Road Weigher RW-2601P Bedienungsanleitung
CAS
CAS ECB Series Bedienungsanleitung
CAS
CAS RW Series Bedienungsanleitung
CAS
CAS PR-T Series Bedienungsanleitung
CAS
CAS CBX Bedienungsanleitung
